nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

14. Recycled Ti-17 Based Composite Design; Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM)

verfasst von : Sonia Ezeddini, Mohamed Boujelbene, Emin Bayraktar, Sahbi Ben Salem

Erschienen in: Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This work present a comprehensive study on the effect and optimization of machining parameters on the kerf (cutting width) and material removal rate (MRR) in wire electrical discharge machining (WEDM) process by using the response surface methodology (RSM) and Taguchi method. The experimental studies were conducted under varying parameters. The main input parameters on this model are the cutting parameters such us pulse on time (T_on), servo voltage (U), Speed of advance or feed rate (S) and injection pressure or flushing pressure (P). Recycled Titanium based composite (an alloy Ti17) was used for machining operations and the combined effects of cutting parameters on the material removal MRR rate and kerf were investigated while using the analysis of variance ANOVA. Mathematical models were used for the objective of minimum kerf and maximum MRR, Cut edge surface analysis was carried out using an optic microscope and Scanning Electron Microscope (SEM) to evaluate the kerf.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Reinforcement Effect of Nano Fe3O4 and Nb2Al on the Mechanical and Physical Properties of Cu-Al Based Composites

Nächstes Kapitel Alternative Composite Design from Recycled Aluminum Chips for Mechanical Pin-Joint (Knuckle) Applications

Mouralova, K., Kovar, J., Klakurkova, L., Prokes, T., Horynova, M.: Comparison of morphology and topography of surface of WEDM machined structural materials. Measeurement. 104( 12–20 (2017)

Knight, W.A., Boothroyd, G.: Fundamentals of Metal Machining and Machine Tools, 3rd edn. CRC Press (2005). Roca Baton, Florida, USA, ISBN 1574446592

Jain, V.K.: Advanced Machining Process. Allied Publishers, Ballard Estate, Mumbai, India (2009)

E.C. Jameson. Electrical Discharge Machining, 2001., ISBN08-726-3521-X

Tai, T.Y., Lu, S.J.: Improving the fatigue life of electro-discharge. Machined SDK1111 tool steel via the suppression of surface cracks. Int. J. Fatigue. 31(3), 433–438 (2009)CrossRef

Lee, S.H., Li, X.: Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide. J. Mater. Process. Technol. 139(1), 315–321 (2003)CrossRef

Zeid, O.A.: On the effect of electro discharge machining parameters on the fatigue life on AISID6 tool steel. J. Mater. Process. Technol. 68(1), 27–32 (1997)CrossRef

Chalisgaonkar, R., Kumar, J.: Multi-response optimization and modeling of trim cut WEDM operation of commercially pure titanium (CPTi) considering multiple user’s performances. Eng. Sci. Technol. Int. J. 18, 125–134 (2015)CrossRef

Medfar, A., Boujelebene, M., Bayraktar, E.: A mathematical model to choose effective cutting parametrs in electroerosion, EDM. J. Achiev. Mater. Manifact. Eng. 47(1), (2011)

10.

Tebni, W., Boujelebene, M., Bayraktar, E., Ben Salem, S.: Parametric approach model for determing electrical discharge machining (EDM) conditions, effect of cutting parameters on the surface integrity. Arabian J. Sci. Eng. 34/1c, 101–114 (2009)

11.

Ozkul, I., Berat Baris, B., Adnan, A.: Machinability of sleipner cold work stell with wire electric discharge machining. Int. J. Elect. Mech. Mechatronic Eng. 2(3), 252–260

12.

A. A. Khan, S.E. Saifuddin, Wear characteristics of copper and aluminium electrodes during EDM of stainless steel and carbide, Proceeding of the international conference on Mechanical Engineering Dhaka, Bangladesh (2005)

13.

Prabhu, S., Vinayagam, B.K.: Analysis of surface characteristics of AISI D2 tool steel material using electric discharge machining process with single wall carbon nano tubes. IACSIT Int J. Eng. Technol. 2(1), (2010)CrossRef

14.

Guu, Y.H.: AFM surface imaging of AISI D2 steel machined by the EDM process. Apple. Surface Sci. 242(2004.) (ICME05-AM-09]), 245–250 (2005)CrossRef

15.

AY, M., Aydogdu, D.: Tel erozyomda Kesma paranehinin parçain bayut olçuusume et kilerinin denyesel ineelennesi. Makine teknolojileri Electronik Deigisililt. 7(13), 31–44 (2010)

16.

Farnaz Nourbakhsh, K.P., Rajurkar, A.P.M., Cao, J.: Wire electro-discharge machining of titanium alloy. Procedia CIRP. 5, 13–18 (2013)CrossRef

17.

Tosun, N., Cogun, C., Tosun, G.: A study on kerf and material removal rate in wire electrical discharge machining based on taguchi method. J. Mater. Process. Technol. 152, 316–322 (2004)CrossRef

18.

Rajesh, R., Dev Anand, M.: The optimization of electro-discharge machining process using response surface methodology and genetic algorithms. Procedia Eng. 38, 3941–3950 (2012)CrossRef

19.

Chalisgaonkar, R., Kumar, J.: Multi-response optimization and modeling of trim cut WEDM operation of commercially pure titanium (CPTi) considering multiple user’s perferences. Eng. Sci. Technol. Int. J. 18, 125–134 (2015)CrossRef

20.

GS Paix Méthodes Taguchi, une approche pratique. Addision-Wesley, MA (1992)

21.

Boujelbene, M., Bayraktar, E., Tebni, W., Ben Salem, S.: Influence of machining parameters on the surface integrity in electrical discharge machining. Arch. Mater. Sci. Eng. 37(2), 110–116 (2009)

Titel: Recycled Ti-17 Based Composite Design; Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM)
verfasst von: Sonia Ezeddini
Mohamed Boujelbene
Emin Bayraktar
Sahbi Ben Salem
Verlag: Springer International Publishing
Buch: Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5
Print ISBN: 978-3-319-95509-4

Electronic ISBN: 978-3-319-95510-0

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95510-0_14

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht