nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

1. Selective Laser Melting

verfasst von : Takayoshi Nakano

Erschienen in: Multi-dimensional Additive Manufacturing

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Lasers are employed for manufacturing (laser manufacturing) in a wide variety of applications, including shape control of metal materials by laser processing and welding, as well as modification of microstructure and functionality through laser quenching. Fundamental research is currently being conducted on laser manufacturing and its industrial applications. In this context, selective laser melting (SLM) can be considered as a culmination of laser manufacturing technology, which is a method for manufacturing three-dimensional objects with complex shapes using the advantages provided by lasers. This chapter introduces the fundamental information on additive manufacturing technology, which has garnered considerable attention in recent years. In particular, the fundamental and potential applications of SLM, which uses lasers as a heat source are showcased.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Laser Processing for Metals

M. Ohtsu, T. Tadokoro, Introduction to Optics: Know Your Properties of Light, Optical Technology Series 1 (Asakura Shoten, 2008), pp. 1–214.

Laser Platform Association, An Introduction to Laser Manufacturing: From the Basics to Equipment Installation (Sanpo Publications, 2010), pp. 1–159.

E. Schubert, I. Zerner, S. Sepold, New possibilities for joining by using high power dipole lasers. Proc. ICALEO 85G, 111–120 (1998)

C.D. Boley, S.A. Khairallah, A.N. Rubenchik, Calculation of laser absorption by metal powders in additive manufacturing. Appl. Optics 54(9), 2477–2482 (2015)

Y. Marutani, S. Hayano, S. Imanaka, Documents on Layered Manufacturing Technology (Optnics Co., Ltd, 2002), pp. 1–181

Y. Marutani, S. Hayano, 3D Printers: Toward Sustainable Development of AM Technology (Optnics Co., Ltd, 2014), pp. 1–208

ASTM Standard F2792–12a, Standard Terminology for Additive Manufacturing Technologies (2009).

T. Nakano, T. Ishimoto, Powder-based additive manufacturing for development of tailor-made implants for orthopedic applications. KONA Powder Particle J. 32, 75–84 (2015)CrossRef

N. Nomura, Creating metal objects for medical use via selective laser melting. J. Japanese Soc. Biomater. 31(4), 220–227 (2013).

10.

EOS GmbH, EOS M290 manuals.

11.

TRAFAM, An Introduction to Metal Layered Manufacturing Technologies (Wythup Co. Ltd., 2016), pp. 1–167.

12.

J.-P. Kruth, J. Deckers, E. Yasa, R. Wauthle, Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proc. Inst. Mech. Eng. (2012). doi: https://doi.org/10.1177/0954405412437085.

13.

T. Nakano, K. Kaibara, Y. Tabata, N. Nagata, S. Enomoto, E. Marukawa, Y. Umakoshi, Bone 31, 479–487 (2002)CrossRef

14.

T. Ishimoto, T. Nakano, Y. Umakoshi, M. Yamamoto, Y. Tabata, J. Bone Miner. Res. 28, 1170–1179 (2013)CrossRef

15.

T. Nakano, Manufacturing using 3D printers: emphasizing the importance of material and structural parameters. Funct. Mater. 34(9), 5–11 (2014)

16.

T. Nakano, H. Fukuda, H. Takahashi, Development of a new powder/solid composite for biomimic implant materials by electron-beam additive manufacturing. Mater. Sci. Forum 879, 1361–1364 (2016)CrossRef

17.

T. Nakano, K. Kuramoto, T. Ishimoto, N. Ikeo, E. Fukuda, Y. Noyama, Energy-absorbing structures and their methods of manufacture, Patent No. 4802277, International Application No. PCT/JP2010/067146, US/EP/ China/Singapore (2011).

18.

N. Ikeo, T. Ishimoto, T. Nakano, Novel powder/solid composites possessing low Young’s modulus and tunable energy absorption capacity, fabricated by electron beam melting, for biomedical applications. J. Alloy. Compd. 639, 336–340 (2015)CrossRef

19.

B. Baufeld, O. Van der Biest, R. Gault, Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties. Mater. Des. 31, S106–S111 (2010)CrossRef

20.

P. Nie, O.A. Ojo, Z. Li, Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy. Acta Mater. 77, 85–95 (2014)CrossRef

21.

T. Ishimoto, K. Hagihara, K. Hisamoto, S.-H. Sun, T. Nakano, Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus. Scripta Mater. 132, 34–38 (2017)CrossRef

22.

S-H. Sun, K. Hagihara, T. Nakano, Effect of scanning strategy on texture formation in Ni-25 at.%Mo alloys fabricated by selective laser melting. Mater. Design 140, 307–316 (2018).

23.

S.-H. Sun, T. Ishimoto, K. Hagihara, Y. Tsutsumi, T. Hanawa, T. Nakano, Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting. Scripta Mater. 159, 89–93 (2018)CrossRef

24.

T. Nagase, T. Hori, M. Todai, S-H. Sun, T. Nakano, Additive manufacturing of dense components in beta-titanium alloys with crystallographic texture from a mixture of pure metallic element powders. Mater. Design 173, 1–10 (2019).

25.

T. Nakano, Additive manufacturing technology for developing metallic biomaterials, in Metals for Biomedical Devices, ed by M. Niinomi, 2nd edn (Woodhead Publishing (Elsevier), 2019), pp. 121–125. ISBN: 978–0–08–102666–33.8

26.

I. Oonaka, T. Araki, Melt processing. Corona, 40 (1987).

27.

T. Nakano, T. Nakamoto, A. Serizawa, T. Inoue, T. Sugawara, N. Shirakawa, M. Yamaguchi, Monocrystalline manufacturing methods, Patent App. 2014–06729 (2014).

28.

K. Hagihara, T. Nakano, M. Suzuki, T. Ishimoto, S. Yalatu, S.-H. Sun, Successful additive manufacturing of MoSi₂ including crystallographic texture and shape control. J. Alloy. Compd. 696, 67–72 (2017)CrossRef

29.

T. Nakano, M. Kishimoto, D. Furuta, Y. Umakoshi, Effect of substitutional elements on plastic behaviour of NbSi₂ based silicide single crystals with C40 structure. Acta Mater. 48, 3465–3475 (2000)CrossRef

30.

K. Hagihara, T. Nakano, H. Maki, Y. Umakoshi, M. Niinomi, Isotropic plasticity of β-type Ti-29Nb-13Ta-4.6Zr alloy single crystals for the development of single crystalline β-Ti implants, Scientific Reports, 6 (2016) srep29779.

31.

Dongdong Gu, Laser Additive Manufacturing of High-Performance Materials (Springer, 2015), pp. 1–310.

Titel: Selective Laser Melting
verfasst von: Takayoshi Nakano
Verlag: Springer Singapore
Buch: Multi-dimensional Additive Manufacturing
Print ISBN: 978-981-15-7909-7

Electronic ISBN: 978-981-15-7910-3

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-15-7910-3_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht