Journal of Materials Science

Bismuth vanadate synthesis by metallo-organic decomposition: thermal decomposition study and particle size control

A. Galembeck, O. L. Alves

Effect of cobalt additions on the age hardening of Cu-4.5Ti alloy

S. Nagarjuna, D. S. Sarma

Behaviour of ionized metal plasma deposited Ta diffusion barrier between Cu and SiO2

Khin Maung Latt, H. S. Park, S. Li, Liu Rong, T. Osipowicz, W. G. Zhu, Y. K. Lee

Morphological characterization of selectively overgrown GaN via lateral epitaxy

Y. G. Wang, Z. Zhang, V. P. Dravid, P. Kung, M. Razeghi

The synthesis and characterization of titanium silicalite-1

Y. G. Li, Y. M. Lee, J. F. Porter

Oxygen condensation stacking faults in crystallized Co found during magnetic annealing of Co-rich amorphous alloy

H. Kyung, C. S. Yoon, C. K. Kim

Microstructure and mechanical properties of 780 MPa high strength steels produced by direct-quenching and tempering process

Woong-Seong Chang

Microstructure of laser melted/rapidly solidified γ/Cr3Si metal silicide “in situ” composites

G. Duan, H. M. Wang

Ink-jet printing of ceramic pillar arrays

X. Zhao, J. R. G. Evans, M. J. Edirisinghe, J. H. Song

A study on the microstructure and property development of d.c. magnetron cosputtered ternary titanium aluminium nitride coatings Part III effect of substrate bias voltage and temperature

R. Wuhrer, W. Y. Yeung

Reactive sintering of boron-doped Ni76Al24 intermetallic

S. O. Moussa, K. Morsi

Effects of BaO on the glass formation of the PbO-B2O3-TiO2-BaO system in relation to transition temperatures

Seon Woo Lee, Kwang Bo Shim, Keun Ho Auh

Devitrification and microstructural coarsening of a fluoride-containing barium aluminosilicate glass

J. A. Griggs, K. J. Anusavice, J. J. Mlecholsky Jr

SiC nanorods prepared from SiO and activated carbon

Y. H. Gao, Y. Bando, K. Kurashima, T. Sato

Fe-rich portion of the Fe-Cr phase diagram: electron microscopy study

Y. Ustinovshikov, B. Pushkarev, I. Igumnov

Surface morphologies of composites based on unsaturated polyester pre-polymer

M. Vayer, C. Serré, N. Boyard, C. Sinturel, R. Erre

The effects of C ion implantation on the near surface microstructure and properties of alpha alumina

M. E. Murphy, M. T. Laugier, B. D. Beake, D. Sutton, S. B. Newcomb

Piezoelectric properties of collagen-nanocrystalline hydroxyapatite composites

C. C. Silva, A. G. Pinheiro, S. D. Figueiró, J. C. Góes, J. M. Sasaki, M. A. R. Miranda, A. S. B. Sombra

Preparation of inorganic-organic hybrid films containing particles using electrophoretic deposition method

Noriko Yamada, Hiromasa Shoji, Yuji Kubo, Shingo Katayama

The crystallography and morphology of Mo2C in ferrite

Y.-N. Shi, P.-M. Kelly

Softened zone formation and joint strength properties in dissimilar friction welds

C. Maldonado, T. H. North

Degradation of thermal barrier coatings due to thermal cycling up to 1150°C

M. S. Ali, Shenhua Song, Ping Xiao

Effect of Ni on the wear behavior of a zinc-aluminum alloy

P. Choudhury, S. Das, B. K. Datta

Evaluation of thermocapillary driving forces in the development of striations during the spin coating process

D. E. Haas, D. P. Birnie III

Elaboration of mixed tantalum and niobium carbides from tantalite mineral (Fe,Mn)(Ta1−x Nbx)2O6

C. Ciaravino, F. F. P. Medeiros, C. P. De Souza, M. Roubin

Synthesis of barium hexaferrite by the co-precipitation method using acetate precursor

A. Ataie, S. Heshmati-Manesh, H. Kazempour

Fly ash reactivity: Extension and application of a shrinking core model and thermodynamic approach

H. J. H. Brouwers, R. J. Van Eijk

Numerical and experimental analysis for solidification and residual stress in the GMAW process for AISI 304 stainless steel

J. Choi, J. Mazumder

Protonic polymer gel electrolytes based on carboxylic acids: ortho and inductive effects

S. S. Sekhon, N. Arora, B. Singh, S. Chandra

Metallization development for AIN/W cofired substrate at low temperature

Liang Tongxiang, Fu Xiaoming, Qiu Xueliang, Tang Chunhe, Hengde Li

Experimental and theoretical investigations on the compressibility of nanocrystalline nickel

S. Rekhi

Review Papers In Journal Of Materials Science Volumes 35, 36, And 37