Journal of Materials Science

Contents by keyword

Mesophase AR pitch derived carbon foam: Effect of temperature, pressure and pressure release time

A. Eksilioglu, N. Gencay, M. F. Yardim, E. Ekinci

Effects of supercooling and cooling rate on the microstructure of Cu–Co–Fe alloys

A. Munitz, A. M. Bamberger, S. Wannaparhun, R. Abbaschian

Preparation of polyaniline dispersions with different assembly structure

Shuangxi Xing, Chun Zhao, Shengyu Jing, Zichen Wang

Electrical properties of polymer/metal interface in polymer light-emitting devices: electron injection barrier suppression

C. A. Olivati, A. J. F. Carvalho, D. T. Balogh, R. M. Faria

Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloy

Caizhi Zhou, Xinqi Yang, Guohong Luan

Synthesis of multilayer Nano-ZrO2 coated polystyrene spheres on fabrication of three-dimensional ordered macroporous structures

Yuji Hotta, Yu Jia, Miharu Kawamura, Naoki Omura, Kiyoka Tsunekawa, Kimiyasu Sato, Koji Watari

Impact behavior and microstructural characteristics of PVA fiber reinforced fly ash-geopolymer boards prepared by extrusion technique

Zhang Yunsheng, Sun Wei, Li Zongjin

Enhancement of the thermoelectric figure of merit in p- and n-type Cu/Bi-Te/Cu composites

Osamu Yamashita, Hirotaka Odahara

Dielectric analysis of light-curing dental restorative materials—a pilot study

M. Rosentritt, M. Behr, S. Knappe, G. Handel

Influence of Al2O3 addition on thermal and structural properties of erbium doped glasses

A. Bonamartini Corradi, V. Cannillo, M. Montorsi, C. Siligardi

Phase formation in Mg-Sn-Zn alloys — thermodynamic calculations vs experimental verification

M. Bamberger

Metal-electroceramic bonding in PZT through the selective application of laser energy

Z. Amin, K. W. Dalgarno, T. P. Comyn, A. W. Tavernor

The nonlinear optical, magnetic, and Mössbauer spectral properties of some iron(III) doped silica xerogels

L. Rebbouh, V. Rosso, Y. Renotte, Y. Lion, F. Grandjean, B. Heinrichs, J.-P. Pirard, J. Delwiche, M.-J. Hubin-Franskin, Gary J. Long

Synthesis of corrosion inhibitive poly(2,5-dimethylaniline) coatings on low carbon steel

Vandana Shinde, S. R. Sainkar, S. A. Gangal, P. P. Patil

The study of optical properties of In2O3 and of mixed oxides In2O3−MoO3 system deposited by coevaporation

M. Anwar, I. M. Ghauri, S. A. Siddiqi

Texture and morphology of pulse plated zinc electrodeposits

D. Vasilakopoulos, M. Bouroushian, N. Spyrellis

Effect of through-thickness compression on the microstructure of carbon fiber polymer-matrix composites, as studied by electrical resistance measurement

Chia-Ken Leong, Shoukai Wang, D. D. L. Chung

Fracture surface topography and fracture mechanism in austenitic SUS316 steel plates fatigued by repeated bending

M. Tanaka, Y. Kimura, J. Taguchi, R. Kato

A study of surface fracture in paste extrusion using signal processing

B. D. Russell, S. Blackburn, D. I. Wilson

New polyimide-silica nano-composites from the sol-gel process using organically-modified silica network structure

Sh. Al-Kandary, A. A. M. Ali, Z. Ahmad

Influence of physico-structural properties on the photocatalytic activity of sol-gel derived TiO2 thin films

M. Fallet, S. Permpoon, J. L. Deschanvres, M. Langlet

Mechanical and barrier properties of epoxy polymer filled with nanolayered silicate clay particles

T. P. Mohan, M. Ramesh Kumar, R. Velmurugan

Structure, properties and fracture of friction stir welds in a high-temperature Al-8.5Fe-1.3V–1.7Si alloy (AA-8009)

W. A. Baeslack III, K. V. Jata, T. J. Lienert

Study of various strain energy distribution in InGaN/GaN multiple quantum wells

Yen-Sheng Lin

Polyaniline and polypyrrole modified conductive nanocomposites of polyfuran and polythiophene with montmorillonite clay

N. Ballav, P. Saha Sardar, S. Ghosh, M. Biswas

Electrophoretic deposition of colloidal crystals assisted by hydrodynamic flows

M. Yoldi, W. González-ViñAs, M. C. Arcos, R. Sirera

Effect of austenitizing temperature and cooling rate on the structure and properties of a ultrahigh strength low alloy steel

N. Kishore Babu, M. R. Suresh, P. P. Sinha, D. S. Sarma

Precipitation behavior of Heusler phase (Ni2AlHf) in multiphase NiAl alloy

C. Y. Cui, J. T. Guo, H. Q. Ye

Prediction of thermal coagulation by AC inductive heating of Mg1-xCaxFe2O4 ferrite powder

S. Nomura, S. Mukasa, T. Miyoshi, N. Okabe, T. Maehara, H. Aono, H. Kikkawa, K. Satou, S. Yumi, Y. Watanabe

Electromechanical coupling properties of [001], [011] and [111] poled Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 single crystals

Q. Wan, C. Chen, Y. P. Shen

Iron supported clay as catalysts for oxidation of cyclooctane

W. Trakarnpruk, P. Dumrongpong

Microstructure, topology and X-ray diffraction in Ag-metal reinforced polymer of polyvinyl alcohol of thin laminates

A. Gautam, P. Tripathy, S. Ram

Templated synthesis of nanostructured europium-doped yttrium oxide thin films

Anthony Y. Ku, William J. Heward, Vanita Mani

The effect of additives on the properties and microstructures of Al2O3-C refractories

M. N. Khezrabadi, J. Javadpour, H. R. Rezaie, R. Naghizadeh

The coating of nickel compounds with copper compounds

Ikram Ul Haq, Khalida Akhtar

Effect of aluminum content on the passivation behavior of Fe–Al alloys in sulfuric acid solution

Wen-Chi Chiang, Wann-Chiun Luu, Jiann-Kuo Wu

A study of two refractories as mould materials for investment casting TiAl based alloys

Q. Jia, Y. Y. Cui, R. Yang

Preparation of highly filled super-paramagnetic PMMA-magnetite nano composites using the solution method

T. Banert, U. A. Peuker

Morphology, structures and properties of ZnO nanobelts fabricated by Zn-powder evaporation without catalyst at lower temperature

Yunhua Huang, Jian He, Yue Zhang, Ying Dai, Yousong Gu, Sen Wang, Cheng Zhou

The synergistic inhibition between hexadecyl trimethyl ammonium bromide (HTAB) and NaBr for the corrosion of cold rolled steel in 0.5 M sulfuric acid

Libin Tang, Xueming Li, Guannan Mu, Guangheng Liu, Lin Li, Hongcheng Liu, Yunsen Si

Carbonation process of alkali-activated slag mortars

F. Puertas, M. Palacios, T. Vázquez

Effects of Gd2O3 on structure and magnetic properties of Ni-Mn ferrite

Lijun Zhao, Hua Yang, Lianxiang Yu, Yuming Cui, Shouhua Feng

Enhancement of the thermoelectric power factor in Ag/Bi-Te/Ag composite devices

Osamu Yamashita, Hirotaka Odahara, Kouji Satou, Shoichi Tomiyoshi

Synthesis and characterization of dense ultra-high temperature thermal protection materials produced by field activation through spark plasma sintering (SPS): I. Hafnium Diboride

U. Anselmi-Tamburini, Y. Kodera, M. Gasch, C. Unuvar, Z. A. Munir, M. Ohyanagi, S. M. Johnson

Nanoindentation of LaCrO3 thin films

Anthony Mario Coratolo, Nina Orlovskaya, M. Lugovy, V. Slyunyayev, S. Dub, Christopher Johnson, Randall Gemmen

Solidification behavior of Al–20.6%Cu alloy under AC magnetic field

Chunyan Ban, Jianzhong Cui, Yi Han, Qixian Ba

Light diffusing polycarbonate—polycycloolefin blends

Miroslav Marek, Josef Steidl

Dispersion of modified carbon nanotubes in 1-butyl-3-methyl imidazolium tetrafluoroborate

Suojiang Zhang, Yanqiang Zhang, Jianmin Zhang, Yuhuan Chen, Xian Li, Jiahua Shi, Zhixin Guo

Polymer-assisted synthesis of BaTiO3 nanorods

J. H. Wei, J. Shi, Z. Y. Liu, J. B. Wang

The synthesis of polygonal Au by a facile route

Fei-Bao Zhang, Yuantao Chen, Mei-Wang Hu-Lin Li

Controlling crystal orientation in microporous titanosilicate ETS-4 films by secondary growth method

B. Yilmaz, K. G. Shattuck, J. Warzywoda, A. Sacco Jr.

Photoluminescence properties of Eu2+-activated Sr3SiO5 phosphors

Soon-Duk Jee, Joung Kyu Park, Sang-Hyuk Lee

Polaron transport in n=3 Ruddlesden–Popper phase Sr4Mn1.5Fe1.5O9.72 ceramics

Woo-Hwan Jung

Layer by layer self-assembly immobilization of glucose oxidase onto chitosan-graft-polyaniline polymers

Xin Hua Xu, Guang Lei Ren, Juan Cheng, Qiang Liu, Dong Guang Li, Qiang Chen

Vanadium-doped nanocrystalline TiO2 layer prepared by spin coating pyrolysis

Kyu-Seog Hwang, Jun-Hyung Ahn, Byung-Hoon Kim

Effect of GeO2 content on upconversion luminescence of Er3+-doped PbF2-SiO2-GeO2 glasses

Hongping Ma, Shiqing Xu

Synthesis of luminescent polyurethane with π-conjugated segment in main chain

Zhijian Zhang, Zhun Ma, Shixiang Xie, Zhe Zheng, Xuqiong Xiao, Wei Wei, Wei Huang

Thermal and chemical activation of fly-ash: Electrical response during early hydration

W. J. McCarter

DSC investigation on WE43 and Elektron 21 Mg alloys

G. Riontino, D. Lussana, M. Massazza, A. Zanada

Formation of nanorod-like structures through the thermal annealing of Cr films

Hyoun Woo Kim, Ju Hyun Myung, Chongmu Lee

Studies on the morphology and the thermal properties of high-density polyethylene filled with graphite

Qiqiong Dong, Qiang Zheng, Mingqiu Zhang

New route for preparing BaTiO3 nanometer powders

Yong Zhang, Shiting Luo, Yang Fu, Keli Zhang

Necessity of verification of leakage currents using Sm doped Ceria electrolytes in SOFCs

T. Miyashita

Improving the anode microstructure for SOFC with coprecipitated composite NiO/Ce0.8Sm0.2O1.9 powder

Haibin Li, Changrong Xia, Zuoxing Zhou, Minhui Zhu, Guangyao Meng

Time evolution of In2O3 rod-like structures in metalorganic chemical vapor deposition process

Hyoun Woo Kim, Nam Ho Kim, Seung Hyun Shim, Ju Hyun Myung

Auxetic behavior from rotating triangles

Joseph N. Grima, Kenneth E. Evans

TEM and DSC studies on the synthetic diamond grown from Fe–Ni–C–B system under HPHT

J.-H. Gong, M.-S. Li, B. Xu, L.-W. Yin, Y.-X. Liu, H.-G. Liu

Erratum

S. M. Thozhur, A. D. Crocombe, P. A. Smith, K. Cowley, M. Mullier

List of Review Papers