Ausgabe 16/2005
Inhalt (48 Artikel)
Anomalous behavior of thermal conductivity and diffusivity in polymeric materials filled with metallic particles
A. Boudenne, L. Ibos, E. Géhin, M. Fois, J. C. Majesté
Preparation and magnetic properties of the CoFe2O4 thin films on Si substrate by sol-gel technique
Nimai Chand Pramanik, Tatsuo FujiI, Makoto Nakanishi, Jun Takada
Dynamic properties characterization of metastable Al/Ti composites
N. Srikanth, Lou Kum Hoong, M. Gupta
Microhardness of the YbAg x In1 − xCu4 alloy system
M. Očko, J. L. Sarrao, N. Stubičar, I. Aviani, Ž. Šimek, M. Stubičar
Linear and non-linear optical transmission from multi-walled carbon nanotubes
A. Pratap, A. L. Shah, A. R. Singh, S. Pal, R. K. Tyagi, A. L. Dawar, P. Chaturvedi, S. Lamba, M. Bal, Harsh
Photo- and Bio-Degradation Processes in Polyethylene, Cellulose and their Blends Studied by ATR-FTIR and Raman Spectroscopies
D. Ołdak, H. Kaczmarek, T. Buffeteau, C. Sourisseau
Extrudate fracture and spheronisation of microcrystalline cellulose pastes
S. L. Rough, D. I. Wilson
“Green” composites from recycled cellulose and poly(lactic acid): Physico-mechanical and morphological properties evaluation
M. S. Huda, A. K. Mohanty, L. T. Drzal, E. Schut, M. Misra
Metal injection molding of shape memory alloys using prealloyed NiTi powders
E. Schöller, L. Krone, M. Bram, H. P. Buchkremer, D. Ståaver
Morphological, mechanical and thermal properties of nylon 6/ABS blends using glycidyl methacrylate-methyl methacrylate copolymers
E. M. Araú Jo, E. Hage Jr., A. J. F. Carvalho
Relationships between composition, structure and strength of inorganic polymers
M. Steveson, K. Sagoe-Crentsil
Thermal shock behavior of two-dimensional C/SiC composites in controlled atmospheres
Hui Mei, Laifei Cheng, Litong Zhang, Xingang Luan, Peng Fang, Jun Zhang
A XANES study of the valence state of vanadium in lithium vanadate phosphate glasses
R. Bacewicz, M. Wasiucionek, A. Twaróg, J. Filipowicz, P. Jóźwiak, J. Garbarczyk
Properties of ball milled thermally treated hemp fibers in an inert atmosphere for potential composite reinforcement
Bhuwan M. Prasad, Mohini M. Sain, D. N. Roy
Transition in material removal behavior during repeated scratching of optical glasses
R. Thonggoom, P. D. Funkenbusch
Synthesis and structure of multi-layered WS2(CoS), MoS2(Mo) nanocapsules and single-layered WS2(W) nanoparticles
P. Z. Si, M. Zhang, Z. D. Zhang, X. G. Zhao, X. L. Ma, D. Y. Geng
Micro-Raman spectroscopy and X-ray diffraction studies of atomic-layer-deposited ZrO2 and HfO2 thin films
S. N. Tkachev, M. H. Manghnani, A. Niilisk, J. Aarik, H. Mändar
Carbothermic reduction of zinc sulfide in the presence of calcium oxide
C. H. Huang, C. I. Lin, H. K. Chen
Study of friction stir welded A319 and A413 aluminum casting alloys
N. A. Rodriguez, E. Almanza, C. J. Alvarez, L. E. Murr
Surface properties of wood and MDF after ultrasonic-assisted cutting
Gerhard Sinn, Herwig Mayer, Stefanie Stanzl-Tschegg
Fabrication of ferrous metallic foams by reduction of ceramic foam precursors
A. Verdooren, H. M. Chan, J. L. Grenestedt, M. P. Harmer, H. S. Caram
An investigation into surface energetics of rice hull ash particles using Inverse Gas Chromatography (IGC)
Deeptangshu S. Chaudhary, Margaret C. Jollands
Single fibre pullout tests on auxetic polymeric fibres
V. R. Simkins, A. Alderson, P. J. Davies, K. L. Alderson
In-situ preparation of Al matrix composites reinforced by TiB2 particles and sub-micron ZrB2
Degang Zhao, Xiangfa Liu, Yuxian Liu, Xiufang Bian
Transmission electron microscopy studies of the bonded SiC-SiC interface
G. N. Yushin, A. V. Kvit, Z. Sitar
Synthesis of nanosized Y-type TiOPc by a high gravity method
Lei Shao, Yinxia Yu, Shuguang Bian, Jianfeng Chen, Xianggao Li
BaTiO3/CoFe2O4 particulate composites with large high frequency magnetoelectric response
S. Q. Ren, L. Q. Weng, S.-H. Song, F. Li, J. G. Wan, M. Zeng
Preparation and tribological properties of poly(methyl methacrylate)/multi-walled carbon nanotubes composites
Bin Dong, Zhi Yang, Yi Huang, Hu-Lin Li, Liang Liu, Feng-Yuan Yan
Wear properties of alloyed layers produced by laser surface alloying of pure titanium with B4C and T{i} mixed powders
Y. S. Tian, C. Z. Chen, L. B. Chen, J. H. Liu, T. Q. Lei
Flexural and tribological properties of polyester-clay nanocomposites
P. Jawahar, R. Gnanamoorthy, M. Balasubramanian
Characterization of (Zr1 − xCe x )0.84Y0.16O2 −δ ceramics (0 ≤ x ≤ 0.1) derived by a wet chemical route
T. S. Zhang, J. Ma, Y. Z. Chen, S. H. Chan
Loose porous composites of Ni/short carbon fibers prepared by electrodeposition
Y. P. Tang, L. Liu, W. B. Hu
Design and cross-linking reaction of blend of reactive polymer latex particles
Mu-Jie Yang, Ji-De Zhang
Preparation and characterization of polystyrene films containing PbS nanoparticles
P. Sreekumari Nair, T. Radhakrishnan, N. Revaprasadu, G. A. Kolawole, A. S. Luyt, V. Djoković
Synthesis of hollow microspheres of nickel using spheres of metallic zinc as templates under mild conditions
Min Ning, Hongfei Zhu, Yaoshun Jia, Helin Niu, Mingzai Wu, Qianwang Chen
“Universal” curve of ionic conductivities in binary alkali borate glasses
Marcio Luis Ferreira Nascimento, Shigueo Watanabe
Characterization and microwave dielectric properties of a new A6B5O18-type cation-deficient perovskite Ba4Nd2Ti3Nb2O18
Hui Zhang, Liang Fang, Ralf Elsebrock, R. Z. Yuan, H. X. Liu
Categorizing dielectric dispersion using the multiple-arc approach
H. S. B. Elayyan, S. N. Al-Refaie