Ausgabe 22/2006
Inhalt (54 Artikel)
Microstructural mechanisms governing the fatigue failure of polyamide 66 fibres
J. M. Herrera Ramirez, A. R. Bunsell, Ph. Colomban
Tuning of magnetite nanoparticles to hyperthermic thermoseed by controlled spray method
Dong-Hyun Kim, Kyoung-Nam Kim, Kwang-Mahn Kim, In-Bo Shim, Myung-Hyun Lee, Yong-Keun Lee
Growth of highly orientated strontium barium niobate thin films on Si substrates through the sol–gel process using a K: SBN template layer
Hui Ye, Zhiru Shen, C. L. Mak, K. H. Wong
Production of single and multi-walled carbon nanotubes using natural gas as a precursor compound
R. Bonadiman, M. D. Lima, M. J. de Andrade, C. P. Bergmann
Modification of properties of rayon fibre by graft copolymerization with acrylic monomers
G. Canché-Escamilla, D. E. Pacheco-Catalán, S. B. Andrade-Canto
Electronic properties of ruthenium sulfide–carbon cluster composite material obtained by calcination of an alternating ruthenium–S–phenylene hybrid copolymer
Hideo Matsui, Tetsuro Kawahara, Hideki Kajita, Yasuhiro Seguchi, Masakuni Yoshihara
Study of infrared spectroscopy and elastic properties of fine and coarse grained nickel–cadmium ferrites
K. B. Modi, M. K. Rangolia, M. C. Chhantbar, H. H. Joshi
Defect engineering for high-power 780 nm AlGaAs laser diodes
D. S. Kim, W. C. Choi, G. W. Moon, K. Y. Jang, T. G. Kim, Y. M. Sung
Preparation and properties of nitrile rubber/montmorillonite nanocomposites via latex blending
M. A. Kader, K. Kim, Y.-S. Lee, C. Nah
Long-term oxidation kinetics of aluminide coatings on alloy steels by low temperature pack cementation process
Z. D. Xiang, S. R. Rose, P. K. Datta
Effect of 0.1% vanadium addition on precipitation behavior and mechanical properties of Al-6063 commercial alloy
S. Camero, E. S. Puchi, G. Gonzalez
The structural and electrical properties of nano-scale Sr2FeMoO6 under high pressures
P. E, J. S. Zhang, L. D. Yao, F. Y. Li, Z. X. Bao, J. X. Li, Y. C. Li, J. Liu, C. Q. Jin, R. C. Yu
Processing of submicrometric CaTi0.8Fe0.2O3-δ ceramics by mechanical activation
R. O. Fuentes, E. Chinarro, F. M. Figueiredo, R. Soares, F. M. B. Marques, J. R. Frade
Forming and sintering of porous calcium-hexaaluminate ceramics with hydraulic alumina
T. Nagaoka, T. Tsugoshi, Y. Hotta, M. Yasuoka, K. Watari
Organoclay effect on transverse compressive strength of glass/epoxy nanocomposites
Jia-Lin Tsai, Jui-Ching Kuo, Shin-Ming Hsu
Metal nanoparticles incorporation during the photopolymerization of polypyrrole
C. R. Martins, Y. M. de Almeida, G. C. do Nascimento, W. M. de Azevedo
Dielectric studies of polyvinyl-acetate-based phantom for applications in microwave medical imaging
G. Bindu, Anil Lonappan, Vinu Thomas, C. K. Aanandan, K. T. Mathew
Oxide ceramic laminates with highly textured α-alumina interlayers: I. Texture control and laminate formation
Ming Wei, Dan Zhi, David G. Brandon
Enhancement of the Seebeck coefficient in touching M/Bi–Te/M (M = Cu and Ni) composites
Osamu Yamashita, Hirotaka Odahara
Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming
Horng-yu Wu, Jau-yuean Perng, Shyh-hung Shis, Chui-hung Chiu, Shyong Lee, Jian-yih Wang
In-situ X-ray-diffraction studies of hydrogenated nanocrystalline gadolinium films
E. Shalaan, K.-H. Ehses, H. Schmitt
Effects of microballoons’ size and content in epoxy on compressive strength and modulus
Kishore, Ravi Shankar, S. Sankaran
Effect of chopped Si–Al–C fiber addition on the mechanical properties of silicon carbide composite
Masanori Sato, Kiyoshi Itatani, Tsuyoshi Tanaka, Ian J. Davies, Seiichiro Koda
Admicellar polymerization of styrene with divinyl benzene on alumina particles: the synthesis of white reinforcing fillers
Shuqin Wang, Tiziana Russo, Greg G. Qiao, David H. Solomon, Robert A. Shanks
Studies on photoconductivity, photovoltaic effect and photoluminescence in chemically deposited (Cd0.95–Pb0.05)S:CdCl2,Dy/Y films
S. Bhushan, Swati Shrivastava, Ashok Shrivastava
The influence of porosity on the fatigue crack growth behavior of Ti–6Al–4V laser welds
L. W. Tsay, Y.-P. Shan, Y.-H. Chao, W. Y. Shu
Model to determine recrystallization temperature of tungsten based dilute solid solution alloys
Taiquan Zhang, Yujin Wang, Yu Zhou, Tingquan Lei, Guiming Song
Influence of temperature on the mechanical behaviour of polyester fibres
C. Le Clerc, A. R. Bunsell, A. Piant
Effects of microalloying and ceramic particulates on mechanical properties of TiAl-based alloys
L. M. Peng, Z. Li, H. Li
Fatigue property of semisolid A357 aluminum alloy under different heat treatment conditions
Yong X. Gan, Ruel A. Overfelt
Continuously responsive epoxy-amine cross-linked silicon sol–gel materials
Meghan E. Woods, Andrew J. Vreugdenhil
Transmission electron microscopy observations on the microstructure of naturally aged Al–Mg–Si alloy AA6022 processed with an electric field
H. Conrad, S. Ramachandran, K. Jung, J. Narayan
Nano and micro structural studies of thin films of ZnO
Harish Bahadur, S. B. Samanta, A. K. Srivastava, K. N. Sood, R. Kishore, R. K. Sharma, A. Basu, Rashmi, M. Kar, Prem Pal, Vivekanand Bhatt, Sudhir Chandra
Fluorescence spectroscopy analysis of Al–Al2O3 composites with coarse interpenetrating networks
Robert J. Moon, Mark Hoffman, Shigemi Tochino, Chang Joo Lee, Giuseppe Pezzotti
Titanium-doped indium oxide films prepared by d.c. magnetron sputtering using ceramic target
Yoshiyuki Abe, Noriko Ishiyama
Thermomechanical treatment of 70/30 brass containing iron impurity
M. Aghaie-Khafri, A. Mohebati-Jouibari
Formation of LaFeO3 and thermal decomposition reactions in lanthanum(III) oxalate–iron(II) oxalate crystalline mixture
M. A. Gabal, S. S. Ata-Allah, A. O. Al-Youbi, S. N. Basahel, S. A. Al-Thabaiti
Oxidative polymerization of pyrrole in the presence of a poly (sodium-p-styrenesulfonate) and its gas-responses
Xingfa Ma, Guang Li, Mang Wang, Hongzheng Chen
Thermo-mechanical analysis of dental silicone polymers
M. -H. Lacoste-Ferré, Ph. Demont, J. Dandurand, E. Dantras, M. Blandin, C. Lacabanne
Preparation and characterization of nanocrystalline chromium boride
Li Qin, Xitian Zhang, Yao Liang, E. Zhang, Hong Gao, Zhiguo Zhang
Influence of solvents on the synthesis and electrochemical properties of Li[Li1/5Ni1/10Co1/5Mn1/2]O2 for the applications in lithium-ion batteries
K. S. Park, C. H. Song, A. Manuel Stephan, S. K. Jeong, K. S. Nahm, S. M. Oh, Y. G. Kim
Grain size dependence of tensile behavior in nanocrystalline Ni–Fe alloys
Hongqi Li, Fereshteh Ebrahimi, Hahn Choo, Peter K. Liaw
Influence of isothermal aging on secondary phases precipitation and toughness of a duplex stainless steel SAF 2205
I. Calliari, M. Zanesco, E. Ramous
Natural superhydrophilicity of sol–gel derived SiO2–TiO2 composite films
S. Permpoon, G. Berthomé, B. Baroux, J. C. Joud, M. Langlet
Young’s modulus of zirconia at high temperature
E. Yeugo Fogaing, Y. Lorgouilloux, M. Huger, C. P. Gault