Ausgabe 5/2016
Inhalt (51 Artikel)
Recent progress of synthesis and applications in polyoxometalate and nanogold hybrid materials
Umsa Jameel, Mingqiao Zhu, Xinzhi Chen, Zhangfa Tong
Review on slip transmission criteria in experiments and crystal plasticity models
E. Bayerschen, A. T. McBride, B. D. Reddy, T. Böhlke
The characterization and effects of microstructure on the appearance of platelet–polymer composite coatings
C. M. Seubert, M. E. Nichols, J. Frey, M. Shtein, M. D. Thouless
Effect of the electron-accepting centre and solubilising substituents on the redox, spectroscopic and electroluminescent properties of four oxadiazoles and a triazole disubstituted with bithiophene
Anastasia S. Kostyuchenko, Gabriela Wiosna-Salyga, Aleksandra Kurowska, Malgorzata Zagorska, Beata Luszczynska, Remigiusz Grykien, Ireneusz Glowacki, Alexander S. Fisyuk, Wojciech Domagala, Adam Pron
Local polarization switching in Ba–Ni co-doped BiFeO3 thin films with low rhombohedral-symmetry distortion
G. Rojas-George, A. Concha-Balderrama, H. Esparza-Ponce, J. Silva, J. T. Elizalde Galindo, M. P. Cruz, J. J. Gervacio, O. A. Graeve, G. Herrera, L. Fuentes, A. Reyes-Rojas
Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics
Delong Cai, Zhihua Yang, Xiaoming Duan, Qian Zhang, Qian Li, Quan Li, Yangshan Sun, Dechang Jia, Yu Zhou
Two-step thermochemical looping using modified ceria-based materials for splitting CO2
Baohuai Zhao, Chunyi Huang, Rui Ran, Xiaodong Wu, Duan Weng
Monte Carlo simulation study of the halogenated MIL-47(V) frameworks: influence of functionalization on H2S adsorption and separation properties
Jing Xu, Wei Xing, Haifeng Wang, Wenbin Xu, Qiuyue Ding, Lianming Zhao, Wenyue Guo, Zifeng Yan
Fabrication of carbon nanotube/cobalt oxide nanocomposites via electrophoretic deposition for supercapacitor electrodes
Nagesh Kumar, Yun-Cheng Yu, Yi Hsuan Lu, Tseung Yuen Tseng
A method for the direct growth of carbon nanotubes on macroscopic carbon substrates
Rongjun Song, Lina Liu, Dongwan Yan, Yun Xiong, Chaoen Li
Electrophoretic deposition of hydroxyapatite and hydroxyapatite–alginate on rapid prototyped 3D Ti6Al4V scaffolds
Vinayaraj Ozhukil Kollath, Qiang Chen, Steven Mullens, Jan Luyten, Karl Traina, Aldo R. Boccaccini, Rudi Cloots
Failure processes governing high-rate impact resistance of epoxy resins filled with core–shell rubber nanoparticles
Erich D. Bain, Daniel B. Knorr Jr., Adam D. Richardson, Kevin A. Masser, Jian Yu, Joseph L. Lenhart
Effect of moisture on the measured tensile strength of polyacrylonitrile carbon fibers
Shipeng Zhu, Yunhua Yang, Zhihai Feng, Yun Wang, Yuexiu Pan, Jianli Gao, Lijun Guo, Xiaobiao Zuo
Equal-channel angular pressing: influence of die design on pressure forces, strain homogeneity, and corner gap formation
Vitor L. Sordi, Anibal A. Mendes Filho, Gustavo T. Valio, Phillip Springer, Jose B. Rubert, Maurizio Ferrante
Novel low-cost hybrid composites from asphaltene/SBS tri-block copolymer with improved thermal and mechanical properties
Hongchao Wu, Vijay Kumar Thakur, Michael R. Kessler
Effect of aging on the failure characteristics of E-glass fibers
Qingwei Wang, Richard K. Brow, Hong Li, Erica Ann Ronchetto
One-step spraying to fabricate nonfluorinated superhydrophobic coatings with high transparency
Yong Li, Xuehu Men, Xiaotao Zhu, Bo Ge, Fanjie Chu, Zhaozhu Zhang
Room-temperature and fast response hydrogen sensor based on annealed nanoporous palladium film
Mengmeng Hao, Shuanghong Wu, Han Zhou, Wenbin Ye, Xiongbang Wei, Xiangru Wang, Zhi Chen, Shibin Li
Dopamine-assisted immobilization of partially hydrolyzed poly(2-methyl-2-oxazoline) for antifouling and biocompatible coating
Chao Pan, Lijuan Chen, Songtao Liu, Yalin Zhang, Chong Zhang, Haikun Zhu, Yanmei Wang
Synthesis and characterization of sustainable polyurethane based on epoxy soybean oil and modified by double-decker silsesquioxane
Jie Huang, Pingping Jiang, Xiaoting Li, Yuandan Huang
Electrical properties and conduction mechanism in carboxyl-functionalized multiwalled carbon nanotubes/poly(vinyl alcohol) composites
Sayed Amrin, V. D. Deshpande
Effects of film topology and contamination as a function of thickness on the photo-induced hydrophilicity of transparent TiO2 thin films deposited on glass substrates by spin coating
Wen-Fan Chen, Pramod Koshy, Charles Christopher Sorrell
Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions
Milica Vujković, Zoran Nedić, Pavle Tančić, Obrad S. Aleksić, Maria Vesna Nikolić, Ubavka Mioč, Slavko Mentus
Tensile-stress-induced growth of ellipsoidal ω-precipitates in a Ti–20wt%Mo alloy
Ryoichi Monzen, Ryutaro Kawai, Toru Oyama, Chihiro Watanabe
Porous and fractal analysis on the permeability of nanofiltration membranes for the removal of metal ions
Oluranti Agboola, Touhami Mokrani, Rotimi Sadiku
Processing maps for the analysis of hot workability of microalloyed steels 38MnSiVS5 and 0.39C1.47Mn
Rudimylla da Silva Septimio, Sergio Tonini Button, Chester John Van Tyne
Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates
Congfeng Wu, Shilei Li, Changhua Zhang, Xitao Wang
Modeling of structural hardening in oxide dispersion-strengthened (ODS) ferritic alloys
S. Y. Zhong, V. Klosek, Y. de Carlan, M. H. Mathon
Hollow Fe3O4@mesoporous carbon core–shell microspheres for efficient sorption of radionuclides
Shihao Xu, Yingguo Zhao, Fangcai Zheng, Yuanguang Zhang
Co-carbonization effect of asphaltine and heavy oil in mesophase development
Yanling Guo, Yunmei Li, Nani Ran, Feng Gao
Facile fabrication and enhanced photocatalytic performance of Ag@AgCl-activated sepiolite heterostructure photocatalyst
Shaomin Liu, Jinglin Zhu, Qing Yang, Pengpeng Xu, Jianhua Ge, Xuetao Guo
Surface area characteristics of furfuryl-alcohol-derived inverse opal carbons produced from silica inverse opal templates
Grant J. McIntosh, James B. Metson
The coupling relation between chain architectures and secondary flow field determined by an unusual dependence of shish-kebabs on molecular weight of high-density polyethylene
Quan-Ping Zhang, Xiao-Chao Xia, Shan He, Jian-Min Feng, Ming-Bo Yang, Jian Zheng, Yin-Tao Li, Yuan-Lin Zhou
Development and characterization of microporous Ti3SiC2 ceramic membranes for filtration of microorganisms
Xinli Liu, Qiankun Zhang, Huibin Zhang, Yao Jiang, Yuehui He
Hierarchical porous hydroxyapatite microspheres: synthesis and application in water treatment
Yong-Cheng Qi, Juan Shen, Qi-Ying Jiang, Bo Jin, Ji-Wei Chen, Xia Zhang, Jin-Lei Su
Phase transformation kinetics of ω-phase in pure Ti formed by high-pressure torsion
Nozomu Adachi, Yoshikazu Todaka, Kenshu Irie, Minoru Umemoto
Tailoring dielectric properties of polymer composites by controlling alignment of carbon nanotubes
Suting Liu, Ming Tian, Liqun Zhang, Yonglai Lu, Tung W. Chan, Nanying Ning
N,P-co-doped carbon nanowires prepared from bacterial cellulose for supercapacitor
Zhaoxia Hu, Shuoshuo Li, Pengpeng Cheng, Wendan Yu, Ruchun Li, Xiaofeng Shao, Worong Lin, Dingsheng Yuan
Mesoporous manganese oxide for the degradation of organophosphates pesticides
Martin Šťastný, Václav Štengl, Jiří Henych, Jakub Tolasz, Petr Vomáčka, Jakub Ederer
Detailed dynamic rheological studies of multiwall carbon nanotube-reinforced acrylonitrile butadiene styrene composite
Jeevan Jyoti, Bhanu Pratap Singh, Sheetal Rajput, Vidya Nand Singh, S. R. Dhakate
The thermal stability of topologically close-packed phases in the single-crystal Ni-base superalloy ERBO/1
I. Lopez-Galilea, J. Koßmann, A. Kostka, R. Drautz, L. Mujica Roncery, T. Hammerschmidt, S. Huth, W. Theisen
Thermodynamic and kinetic evidence for MgO formation and pinning behavior in glycine-doped MgB2 bulks
Qi Cai, Qianying Guo, Yongchang Liu, Zongqing Ma, Huijun Li
Enzymatically treated natural fibres as reinforcing agents for biocomposite material: mechanical, thermal, and moisture absorption characterization
Michael George, Paolo G. Mussone, Kirill Alemaskin, Michael Chae, John Wolodko, David C. Bressler
Hot tearing characteristics of Mg–2Ca–xZn alloys
Jiangfeng Song, Zhi Wang, Yuanding Huang, Amirthalingam Srinivasan, Felix Beckmann, Karl Ulrich Kainer, Norbert Hort
A new strategy for preparation of long-chain branched polypropylene via reactive extrusion with supercritical CO2 designed for an improved foaming approach
Kun Wang, Shusheng Wang, Fei Wu, Yongyan Pang, Wei Liu, Wentao Zhai, Wenge Zheng
Preparation and properties of multifunctional thermochromic energy-storage wood materials
La Hu, Shaoyi Lyu, Feng Fu, Jingda Huang, Siqun Wang
Effect of hard segment architecture on shape memory properties of polycaprolactone-based polyurethane containing azobenzene
Xiwen Wu, Libin Liu, Wenyuan Fang, Congde Qiao, Tianduo Li
Fabrication and characterization of silver nanoparticle impregnated uniaxially aligned fibre yarns by one-step electrospinning process
P. V. Mayuri, P. Ramesh
Effects of temperature and frequency on dynamic mechanical properties of glass/epoxy composites
Jiemin Feng, Zhansheng Guo
Erratum to: Template-free electrochemical synthesis of tin nanostructures
David T. Mackay, Matthew T. Janish, Uttara Sahaym, Paul G. Kotula, Katherine L. Jungjohann, C. Barry Carter, M. Grant Norton