Ausgabe 8/2002
Inhalt (29 Artikel)
In situ synthesis of AlPO4-14, CoAPO-44 and ZnAPO-34 films on alumina substrates
Lixiong Zhang, Huanting Wang
The influence of Si and Mg rich phases on the mechanical properties of 6061 Al-matrix composites reinforced with Al2O3
J. M. Gómez De Salazar, M. I. Barrena
Morphology, mechanical and thermal behavior of acrylate rubber/fluorocarbon elastomer/polyacrylate blends
M. Abdul Kader, A. K. Bhowmick, T. Inoue, T. Chiba
Transformation properties and microstructure of sputter-deposited Ni-Ti shape memory alloy thin films
T. Lehnert, S. Crevoiserat, R. Gotthardt
X-ray absorption spectroscopy, simulation and modeling of Si-DLC films
V. Palshin, R. C. Tittsworth, C. G. Fountzoulas, E. I. Meletis
Sintering of 6H(α)-SiC and 3C(β)-SiC powders with B4C and C additives
H. N. Yoshimura, A. C. Da Cruz, Y. Zhou, H. Tanaka
In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography
J. A. Elliott, A. H. Windle, J. R. Hobdell, G. Eeckhaut, R. J. Oldman, W. Ludwig, E. Boller, P. Cloetens, J. Baruchel
Effect of Ar heat treatment on oxygenated R1−x Ca x Ba2Cu3O7−δ (R = Y, Sm) superconductors
Anurag Gupta, A. Sedky, A. V. Narlikar, D. P. Singh
Talc as nucleating agent of polypropylene: morphology induced by lamellar particles addition and interface mineral-matrix modelization
E. Ferrage, F. Martin, A. Boudet, S. Petit, G. Fourty, F. Jouffret, P. Micoud, P. De Parseval, S. Salvi, C. Bourgerette, J. Ferret, Y. Saint-Gerard, S. Buratto, J. P. Fortune
Finite element analysis of a polymer composite subjected to a sliding steel asperity Part I Normal fibre orientation
Tibor Goda, Káeroly Váradi, Klaus Friedrich, Hermann Giertzsch
Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel
L. Zhao, T. A. Kop, V. Rolin, J. Sietsma, A. Mertens, P. J. Jacques, S. Van Der Zwaag
Evaluation of hot workability of particle reinforced aluminum matrix composites by using deformation efficiency
Do-Hyun Park, Byung-Chul Ko, Yeon-Chul Yoo
Characterisation of crosslinked polyethylene materials by luminescence techniques
G. Teyssèdre, G. Tardieu, C. Laurent
Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4
K. T. Jacob, K. P. Jayadevan
Surface properties and dispersion behaviour of precipitated silicas
T. Jesionowski, J. Żurawska, A. Krysztafkiewicz
J-R curve determination of magnesium hydroxide filled polypropylene using the normalization method
C. Morhain, J. I. Velasco
X-ray diffraction and magnetic analysis of deformation induced martensites in a Fe-17Mn-1.9Al-0.1C steel
S. S. M. Tavares, A. Lafuente, S. Miraglia, D. Fruchart
Simulation of porosity by microballoon dispersion in epoxy and urethane: mechanical measurements and models
M. A. El-Hadek, H. V. Tippur
Dispersion stability of Y-TZP/Ce-TZP powder system and slip casting
M. J. Kim, T. Y. Yang, Y. B. Lee, H. C. Park, R. Stevens
The influence of starch swelling on the material properties of cooked potatoes
A. Ormerod, J. Ralfs, S. Jobling, M. Gidley
Tensile and compressive properties of flax fibres for natural fibre reinforced composites
H. L. Bos, M. J. A. Van Den Oever, O. C. J. J. Peters
Formation of TiN whiskers through carbothermal reduction of TiO2
R. V. Krishnarao, J. Subrahmanyam, M. Yadagiri
Brazing perovskite ceramics with silver/copper oxide braze alloys
K. M. Erskine, A. M. Meier, S. M. Pilgrim