Ausgabe 9-10/2005
High Temperature Capillarity
Inhalt (132 Artikel)
Dr. Thomas Young—Natural philosopher
E. D. Hondros
Classification and general derivation of interfacial forces, acting on phases, situated in the bulk, or at the interface of other phases
G. Kaptay
Oxygen transport phenomena at the liquid metal-vapour interface
E. Arato, E. Ricci, P. Costa
Material surfaces and nanosystems close to the melting temperature
U. Tartaglino, T. Zykova-Timan, F. Ercolessi, E. Tosatti
Energetics of polycrystals
M. E. Glicksman
Dynamic surface tension measurements on a molten metal-oxygen system: The behaviour of the temperature coefficient of the surface tension of molten tin
L. Fiori, E. Ricci, E. Arato, P. Costa
A new method for simultaneous measurement of surface tension and viscosity
H. Fujii, T. Matsumoto, T. Ueda, K. Nogi
Thermodynamic study on the melting of nanometer-sized gold particles on graphite substrate
J. Lee, M. Nakamoto, T. Tanaka
Investigation of interaction of metal melts and zirconia
A. V. Durov, Y. V. Naidich, B. D. Kostyuk
The effect of gas flow rate on the evolution of the surface oxide on a molten low carbon Al killed steel
Y. Wang, S. Sridhar
A model to calculate surface tension of commercial alloys
Yuchu Su, K. C. Mills, A. Dinsdale
Determination of the surface tension of liquid stainless steel
Z. Li, K. Mukai, M. Zeze, K. C. Mills
Surface tension of molten stainless steels under plasma conditions
T. Matsumoto, T. Misono, H. Fujii, K. Nogi
Equation to estimate the surface tensions of stainless steels
Y. Su, Z. Li, K. C. Mills
Surface tension of PbO-B2O3 and Bi2O3-B2O3 glass melts
S. Fujino, C. Hwang, K. Morinaga
Surface tension of nickel, copper, iron and their binary alloys
J. Brillo, I. Egry
Surface tension of melts of Na-K-Cs ternary system
B. B. Alchagirov, R. Kh. Arkhestov, T. M. Taova, Kh. B. Khokonov
Experimental study on time evolution of Marangoni flow instability in molten silicon bridge
N. Yamane, K. Nagafuchi, S. Shiratori, H. Okubo, N. Sato, T. Hibiya
Effects of sulfur on interfacial energy between Fe-C melt and graphite
S. Jung, T. Ishikawa, S. Sekizuka, H. Nakae
The surface tension of steels
R. F. Brooks, P. N. Quested
The oscillation spectrum of a compound drop
I. Egry
Non-contact measurement of surface oscillation due to Marangoni flow instability in a silicon liquid bridge by phase-shift interferometry
N. Okubo, R. Jono, S. Shiratori, S. Goto, T. Hibiya
Thermodynamics and surface properties of liquid Ga-X (X = Sn, Zn) alloys
R. Novakovic, D. Zivkovic
Temperature dependences of density and ultrasound velocity of the eutectic Bi-44.6 wt.% Pb melt
D. Yagodin, G. Sivkov, S. Volodin, P. Popel, A. Mozgovoj
Theoretical model of the interfacial reactions between solid iron and liquid zinc-aluminium alloy
M.-L. Giorgi, J.-B. Guillot, R. Nicolle
Measurement of contact angle and work of adhesion at high temperature
N. Eustathopoulos, N. Sobczak, A. Passerone, K. Nogi
Atomistic simulations of reactive wetting in metallic systems
E. B. Webb III, J. J. Hoyt, G. S. Grest, D. R. Heine
Effects of roughness pitch of surfaces on their wettability
H. Nakae, M. Yoshida, M. Yokota
Wetting and spreading of liquid metals on ZrB2-based ceramics
M. L. Muolo, E. Ferrera, A. Passerone
The wettability of titanium diboride by molten aluminum drops
D. A. Weirauch Jr., W. J. Krafick, G. Ackart, P. D. Ownby
Wetting and infiltration of carbon by liquid silicon
O. Dezellus, S. Jacques, F. Hodaj, N. Eustathopoulos
Interaction between liquid aluminum and NiO single crystals
N. Sobczak, J. Oblakowski, R. Nowak, A. Kudyba, W. Radziwill
Reactions of Hf-Ag and Zr-Ag alloys with Al2O3 at elevated temperatures
R. E. Loehman, F. M. Hosking, B. Gauntt, P. G. Kotula, P. Lu
Interface phenomena in the B4C/(Me-Ti) systems (Me = Cu, Au and Sn)
M. Aizenshtein, N. Froumin, N. Frage, M. P. Dariel
Influence of substrate crystallographic orientation on the wettability and adhesion of α-Al2O3 single crystals by liquid Al and Cu
P. Shen, H. Fujii, T. Matsumoto, K. Nogi
Reactive wetting of mullite Al2[Al2 + 2x Si2 − 2x ] O10 − x single crystals by yttrium-aluminosilicate and borosilicate glasses
W. Braue, B. Hildmann, H. Schneider, B. T. Eldred, P. Darrell Ownby
Interfacial analysis of (La0.6Sr0.4)(Co0.2Fe0.8)O3− δ substrates wetted by Ag-CuO
K. Scott Weil, Jin Yong Kim, John S. Hardy
Finite size scaling in grain boundary wetting
V. Traskine, P. Volovitch, L. Barrallier, Ya. Kucherinenko, P. Protsenko, Z. Skvortsova
Wettability of AlN with different roughness, porosity and oxidation state by commercial Ag-Cu-Ti brazes
N. Yu. Taranets, H. Jones
Grain boundary wetting in ceramic cuprates
V. V. Belousov
Surface tension and density of copper–Zirconium alloys in contact with fluoride refractories
V. P. Krasovskyy, Y. V. Naidich, N. A. Krasovskaya
Wetting characteristics of oxygen-containing iron melts on refractory oxides
E. Kapilashrami, S. Seetharaman
Solid state spreading in the Cu/Cu system
J. M. Missiaen, R. Voytovych, B. Gilles, N. Eustathopoulos
Surface and grain boundary wetting of Fe based solids by molten Pb and Pb-Bi eutectic
P. Protsenko, N. Eustathopoulos
Molecular dynamics study of nanoscale structure formation in droplet spreading on solid surfaces
V. M. Samsonov, V. V. Dronnikov, M. Yu. Pushkar, E. V. Nikiforova, A. I. Filippov, S. D. Muravyev
Molecular dynamics analysis of the wetting front structure in metal/metal systems
A. Kuboy, T. Makino, D. Sugiyama, S.-I. Tanaka
Interfacial phenomena in high temperature processes
K. C. Mills, E. D. Hondros, Zushu Li
Observations of the advancing δ -ferrite/γ -austenite/liquid interface during the peritectic reaction
N. J. McDonald, S. Sridhar
Marangoni flow of molten silicon: The effects of oxygen partial pressure
T. Hibiya
Migration of liquid phase in low temperature sintering of AlN
R. Fu, K. Chen, S. Agathopoulos, M. C. Ferro, D. U. Tulyaganov, J. M. F. Ferreira
Nucleation of crystals in deeply undercooled alloy melts
M. Palumbo, C. Papandrea, L. Battezzati
Influence of wettability on bubble formation in liquid
S. Gnyloskurenko, A. Byakova, T. Nakamura, O. Raychenko
Combining thermodynamics and DSC to characterize the melting and wetting behavior of a composite powder used for joining ceramics
M. Brochu, R. A. L. Drew
Microstructure and dispersion of Cu-TiC X master alloys into molten Cu and the relation to contact angle data
A. R. Kennedy, M. Brown, O. Menekse
Flux-assisted infiltration of liquid Al-6063 into TiC beds in air
V. H. López, A. R. Kennedy
Wetting and mechanical properties, a case study: Liquid metal embrittlement of a martensitic steel by liquid lead and other liquid metals
A. Legris, J.-B. Vogt, A. Verleene, I. Serre
Corrosion behaviour of steels and refractory metals in flowing Lead-Bismuth Eutectic at low oxygen activity
G. Benamati, A. Gessi, G. Scaddozzo
Interfacial properties and structure stability of Ni/Y2 O3-ZrO2-TiO2 cermet anodes for solid oxide fuel cells
X. Mantzouris, N. Zouvelou, D. Skarmoutsos, P. Nikolopoulos, F. Tietz
High-strength oxide ceramics joints obtained by diffusion bonding with the use of platinum and palladium gaskets
Yu. Naidich, I. Gab, T. Stetsyuk, D. Kurkova
Effects of CO2 shielding gas additions and welding speed on GTA weld shape
Lu Shanping, Fujii Hidetoshi, Nogi Kiyoshi
Wetting in infiltration of alumina particle preforms with molten copper
M. Bahraini, L. Weber, J. Narciso, A. Mortensen
Ceramic oxide bonds using calcium aluminosilicate glasses
L. Esposito, A. Bellosi
Graded glass coatings for Co-Cr implant alloys
S. Fujino, H. Tokunaga, S. Hata, E. Saiz, A. P. Tomsia
Numerical modelling of transient liquid phase bonding and other diffusion controlled phase changes
T. C. Illingworth, I. O. Golosnoy, V. Gergely, T. W. Clyne
Influence of surface modification of alumina on bond strength in Al2O3/Al/Al2O3 joints
M. Ksiazek, N. Sobczak, B. Mikulowski, W. Radziwill, B. Winiarski, M. Wojcik
Pressure infiltration of Al-Si alloys into compacts made of carbon particles
A. RodrÍguez, S. A. Sánchez, J. Narciso, E. Louis, F. RodrÍguez-Reinoso
Mathematical model for simultaneous growth of gas and solid phases in gas-eutectic reaction
L. Drenchev, J. Sobczak, W. Sha, S. Malinov
On the asymmetrical dependence of the threshold pressure of infiltration on the wettability of the porous solid by the infiltrating liquid
G. Kaptay, T. BÁrczy
Pressure infiltration of Al and Al-12 wt% Si alloy into compacts of SiC and oxidized SiC particles
J. T. TIAN, J. M. MOLINA, J. NARCISO, C. GARCÍA-CORDOVILLA, E. LOUIS
The effect of Ni, ZrB2 and MoS2 additives on certain physico-chemical and mechanical properties of special glasses in the ZnO-PbO-B2O3-SiO2 system
B. Staniewicz-Brudnik, K. Majewska-Albin, B. Trybalska
Application of push-off shear test for evaluation of wetting-interface structure-bonding relationship of solder joints
N. SOBCZAK, J. SOBCZAK, R. NOWAK, A. KUDYBA, P. DARLAK, B. MIKULOWSKI, A. WOJCIECHOWSKI
Nano-structural observation of carbon black dispersion in natural rubber matrix by three-dimensional transmission electron microscopy
S. Kohjiya, A. Katoh, J. Shimanuki, T. Hasegawa, Y. Ikeda
Molybdenum disulfide synthesized by hydrothermal method as anode for lithium rechargeable batteries
Guanghui Guo, Jianhe Hong, Changjie Cong, Xinwen Zhou, Keli Zhang
A critical damage criterion for creeping solids
C. Phaniraj, B. K. Choudhary, Baldev Raj, K. Bhanu Sankara Rao
Thermal and dynamic mechanical properties of binary blends of bacterial copolyester poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV) with poly(2-hydroxyethylmethacrylate) (PHEMA)
J. Gracida, F. Perez-Guevara, J. Cardoso-MartÍNez
Magnetic properties and Mössbauer studies of nanosized NiFe2O4 particles
J. H. Liu, L. Wang, F. S. Li
Synthesis and electrochemical properties of LiFePO4/C cathode material
Xin Wen Zhou, Dan Zhan, Chang Jie Cong, Guang Hui Guo, Li Na Wang, Ke Li Zhang
An investigation of the self-propagating high-temperature synthesis of Ti(Si,Al)2
A. Chrysanthou, E. K. Opoku, L. Han
Quantitative analysis of local fracture surface patterns in materials by shape parameters
M. Tanaka, Y. Kimura, R. Kato, N. Oyama
In-situ quasicrystal-reinforced magnesium matrix composite processed by equal channel angular extrusion (ECAE)
M. Y. Zheng, X. G. Qiao, S. W. Xu, K. Wu, S. Kamado, Y. Kojima
Preparation of plated β-tricalcium phosphate containing hydroxyapatite for use in bonded inorganic-organic composites
T. Furuzono, D. Walsh, S. Yasuda, K. Sato, J. Tanaka, A. Kishida
Modified chemical route to prepare Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics
Li Chunhong, Li Qiang, Song Fengbing, Zhao Shixi, Shen Dezhong
Temperature dependence of vacancy wind effect in β–Zr(Al) solid solution
A. Laik, K. Bhanumurthy, G. B. Kale
On the power-law indenter used in the analysis of nanoindentation unloading curves
Guanghui Fu, Tiesheng Cao, Ling Cao
Study on the mixed system of liquid crystalline epoxy/epoxy resin
Chen Lixin, Wang Rumin, Chan Pengshan, Qi Shuhua
Characterization and dielectric property of polyimide-silica composite films prepared via sol–gel and thermal imidization process
Jian Zhang, Bao-Ku Zhu, You-Yi Xu
Unique preparation method of self-assembled spherical particles consisting of hydroxyapatite nanocrystals modified by amino groups
T. Furuzono, S. Yasuda, J. Tanaka, A. Kishida
Effect of heat treatment on setting behavior and compressive strength of tetracalcium phosphate cement
Kuan-Liang Lin, Chien-Ping Ju, Jiin-Huey Chern Lin
Thickness dependent photoelectrochemical cells performance of CdSe and HgS thin films
S. S. Kale, H. M. Pathan, C. D. Lokhande
Synthesis of LiFePO4 by one-step annealing under the vacuum condition
Meng Li, Kai Xie, Dezhan Li, Yi Pan
Recession behavior of Lu2Si2O7/mullite eutectic in steam jet at high temperature
Shunkichi Ueno, D. Doni Jayaseelan, Tatsuki Ohji, Hua-Tay Lin
Turbostratic carbon nitride prepared by pyrolysis of melamine
Y. C. Zhao, D. L. Yu, H. W. Zhou, Y. J. Tian, O. Yanagisawa
Effects of rare earth elements on microstructure and high temperature mechanical properties of ZC63 alloy
J. H. Jun, J. M. Kim, B. K. Park, K. T. Kim, W. J. Jung
Deposition of calcium phosphate on carbon fibers using sol-gel-based reactions: The consequences of using predominantly organic solvents on the ultimate phase of calcium phosphate formed
Michael R. Mucalo, Bernhard Wielage, Herbert Mucha
How to design a structure able to mimic the arterial wall mechanical behavior?
M. R. Jouan, M. N. Bureau, A. Ajji, M. A. Huneault, D. Mantovani
On the effective indenter shape used in the analysis of nanoindentation unloading curves
Guanghui Fu, Ling Cao
Phase evolution in the Ti-Al-B and Ti-Al-C systems during combustion synthesis: Time resolved study by synchrotron radiation diffraction analysis
A. S. Rogachev, J.-C. Gachon, H. E. Grigoryan, D. Vrel, J. C. Schuster, N. V. Sachkova
Properties of Ta–Mo alloy gate electrode for n-MOSFET
Chung Keun Lee, Jae Young Kim, Shin Nam Hong, Huicai Zhong, Bei Chen, Veena Misra
Synthesis and characterization of PLZST prepared by coprecipitation
L. H. Xue, Q. Li, Q. Y. Guo, R. Liu, Y. L. Zhang
Preparation, characterization and dielectric properties of Sr4Ln2Ti4Ta6O30 (Ln = Nd and Sm) ceramics
L. Fang, C. L. Diao, L. Chen, H. Zhang, H. X. Liu, R. Z. Yuan
Synthesis and mechanical properties of ternary molybdenum carbosilicide and its composite
L. M. Peng, J. H. Wang, H. Li, L. H. He, J. H. Zhao
Magnetic properties of SUS 304 austenitic stainless steel after tensile deformation at elevated temperatures
Lefu Zhang, Seiki Takahashi, Yasuhiro Kamada, Hiroaki Kikuchi, Katsuyuki Ara, Masaya Sato, Takashi Tsukada
Preparation and characterization of silver-filled polyester matrix composites
L. Haurie, A. I. Fernåndez, J. M. Chimenos, M. A. Fernåndez, D. Gonzalo, F. Espiell
Hematite/nickel oxide multilayers characterizations
T. Caillot, B. Domenichini, P. Dufour, S. Bourgeois
Interfacial shear strength of flax fiber/thermoset polymers estimated by fiber fragmentation tests
R. Joffe, J. Andersons, L. Wallström
Modification of hydroxyapatite/gelatin composite by polyvinylalcohol
Myung Chul Chang, Ching-Chang Ko, William H. Douglas
Preparation of b-oriented MFI zeolite membranes on porous α-alumina substrates precoated with mesoporous silica sublayer
F. Z. Zhang, M. Fuji, M. Takahashi
Aqueous corrosion behavior of Ce-implanted ZrN coating
Q. G. Zhou, X. D. Bai, Y. H. Ling, D. Q. Peng, J. Xu, D. R. Wang
New NZP-based phosphates with low and controlled thermal expansion
A. I. Orlova, A. K. Koryttzeva, Ye. V. Lipatova, M. V. Zharinova, I. G. Trubach, Yu. V. Evseeva, N. V. Buchirina, G. N. Kazantsev, S. G. Samoilov, A. I. Beskrovny
Fabrication of Ti2AlC-Ti3AlC2-Ti3SiC2 composite by spark plasma sintering (SPS) method from elemental powders
Xiaolin Hong, Bingchu Mei, Jiaoqun Zhu, Weibing Zhou
Fabrication of in-situ synthesized TiC particles reinforced composite coating by powder feeding laser cladding
Sen Yang, Wenjin Liu, Minlin Zhong, Zhanjie Wang, Hiroyuki Kokawa
Characterisation of polyphosphate composites based on intermediate temperature
T. Uma, H. Y. Tu, D. Freude, D. Schneider, U. Stimming