Ausgabe 5-6/2014
Inhalt (39 Artikel)
End-to-End Simulation of Casting and Metal-Forming Operations with ProCAST and Qform Software
A. D. Abdullin, A. A. Ershov
Nickel Sulfide Concentrate Processing Using Low-Temperature Roasting with Sodium Chloride
V. A. Imideev, P. V. Aleksandrov, A. S. Medvedev, O. V. Bazhenova, A. R. Khanapieva
Resources-Saving Technology for Recycling Off-Grade Waste Products Cast from Superalloys
V. V. Sidorov, V. E. Rigin, A. V. Goryunov, P. G. Min
The Use of Bentonite Clays from the Voskresensk Deposit to Make Iron-Ore Pellets
A. N. Shapovalov, A. V. Zavodyanyi
Evaluating the Efficiency of Blast Furnaces and the Prospects of Blast-Furnace Smelting
I. F. Kurunov, S. V. Filatov
Evaluation of the Effect of Modifier Composition with Nanostructured Additives on Grey Cast Iron Properties
V. V. Kondrat’ev, A. E. Balanovskii, N. A. Ivanov, V. A. Ershov, M. V. Kornyakov
Determination of the Integral Emissivity of a Periclase-Carbon Lining
M. V. Krasnyanskii, Ya. L. Kats
The Formation of Sulfide Inclusions and Their Location Within Grains in Relation to Steel 20 Deoxidation Conditions
O. A. Shevtsova, N. A. Zyuban, S. A. Pegisheva*, D. V. Rutskii, K. E. Titov, N. V. Klyachina
Applying Coatings to the Narrow Walls of Continuous-Caster Molds to Improve the Quality of the Surface of Slabs
A. A. Gerasimova, A. G. Radyuk, L. M. Glukhov
Control of Structure Formation During Thermomechanical Treatment of Shipbuilding and Pipe Steels of Unified Chemical Composition
S. V. Korotovskaya, V. V. Orlov, E. I. Khlusova
Study of the Tractive Forces Applied to Galvanized Strip on a Straightening Machine in a Continuous Hot-Galvanizing Unit
E. A. Maksimov, R. L. Shatalov, N. N. Litvinova
Heat Treatment as a Method for Excluding IGSCC for Dn300 RBMK-1000 Pipeline Welded Joints
A. N. Romanov, A. G. Derzhavin, K. I. Shut’ko, M. V. Bortnikov, A. B. Korostelev
Factors That Affect the Quality of Hot-Forged Bimetallic Powder Products
E. N. Bessarabov, M. Q. K. Yasi, Yu. G. Dorofeyev, V. Yu. Dorofeyev
Material Composition of the Dust from the Electrostatic Precipitators of a Vanyukov Furnace at the Middle Ural Copper Smelter
E. N. Selivanov, G. V. Skopov, R. I. Gulyaeva, A. V. Matveev
Computer Modeling, Volume Prototyping, and Non-contact Optical Scanning in an Integrated Technology for Pre-production Casting. Trial Use
A. K. Shmakov, E. I. Unagaev, I. V. Kolmogortsev, S. A. Osipov, V. V. Kotov
Introduction of a Level-2 Automated System as Part of the Reconstruction of a Walking-Beam Furnace in the Rail-Beam Shop
K. V. Volkov, E. A. Kolotov, A. Yu. Syusyukin
Development of Methods and Technologies at the Sinter Plant
A. I. Shentsov, A. A. Odintsov, E. B. Svirin
Improving Blast-Furnace Smelting Indices Through More Efficient Screening of Sinter Fines
L. V. Portnov, A. M. Koverzin, V. I. Kutran’, L. D. Nikitin
Technology Development and Efficiency Assessment for Waste Utilization in Pig-Iron Production
A. M. Koverzin, L. D. Nikitin, L. V. Portnov, A. A. Drozhzhin
Improving the Durability of Blast-Furnace Tuyeres
L. V. Portnov, L. D. Nikitin, S. F. Bugaev, V. G. Shchipitsyn
Development of Extra-Furnace Treatment Technology for Blast-Furnace Iron in Order to Manufacture Replacement Metallurgical Equipment with Improved Operating Life
V. V. Andreev, D. A. Lubyanoi, Yu. N. Samsonov, I. A. Kaminskaya, S. V. Lubyanaya
Changing the Technical-Economic Indices of Rail-Steel Production by Sorting Scrap Based on its Content of Residual Elements
P. A. Shabanov, K. V. Volkov, E. P. Kuznetsov, I. V. Aleksandrov, A. Yu. Batalov
Development of Technology for the Secondary Treatment of Metal for Continuous Billet Casters
A. V. Amelin, A. M. Koverzin, Yu. N. Nosov, M. V. Utrobin, N. G. Matveev, V. V. Musokhranov
Modeling the Laws that Determine the Quality of Rolled Rounds During the Rolling Operation
V. V. Brinza, I. S. Kuznetsov
Assimilation of Advanced Roll Materials in Rolling Production
Yu. O. V’yuntsov, A. M. Koverzin, A. Yu. Romadin, V. V. Salomykin, E. V. Saprykin
Analysis of Experimental Dependence of Rail Steel E78KhSF Deformation Resistance on Deformation Temperature, Rate, and Degree
A. V. Golovatenko, V. V. Dorofeev, V. A. Trusov, K. V. Volkov, A. V. Dobryanskii
Cold-Resistant Steel Rebar
E. A. Ivanov, O. V. Dikan’, Yu. O. V’yuntsov, E. V. Chinokalov, S. A. Dyubina
Cold-Drawn Reinforcing Wire with Screw Profile
A. R. Fastykovskii, E. V. Chinokalov, A. G. Milovanov, N. V. Myskova, A. A. Shumkin
The Repairs Project as a Tool for Improving the Productivity of Equipment
M. Yu. Mezentsev, A. G. Shabis
Erratum to: Analysis of Pore Formation and Impeded Shrinkage of an Alloy in the System ProCast
I. N. Erdakov, A. V. Karpinskii, V. V. Novokreshchenov