nach oben

Tribology Letters

Erschienen in:

01.12.2022 | Original Paper

Study of Friction and Wear Characteristics of PEEK by Reciprocating Sliding Experiment and Temperature Dependences Simulation

verfasst von: Kerui Chen, Zehua Lu, Peitang Wei, Huaiju Liu, Dong Wei, Huaijie Xie

Erschienen in: Tribology Letters | Ausgabe 4/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A systematic study combined experiment and temperature-related simulation has been conducted to evaluate the wear and friction performance of poly-ether–ether–ketone (PEEK) and preliminary explore the feasibility of PEEK as the reciprocating transmission component material. The reciprocating sliding test was carried out with PEEK–PEEK surface contacting tribo-pair under dry conditions at room temperature. The temperature-dependent wear rate was calibrated into the simulation to predict the wear behavior of PEEK. The results showed strong correlations between its friction and wear behaviors and pressure, velocity as well as temperature increase caused by friction. With the increase of velocity and pressure, the friction coefficient of PEEK decreased. An empirical formula of friction coefficient considering both velocity and pressure for PEEK was first proposed. As the velocity and pressure increased, the wear mechanism changed and wear intensified. Pressure had a greater influence on wear rate than velocity due to friction heat.

Vorheriger Artikel A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials

Nächster Artikel Tribological Behavior of a Shot-Peened Nickel-Based Single Crystal Superalloy at High Temperature

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Theiler, G., Gradt, T.: Friction and wear of PEEK composites in vacuum environment. Wear 269, 278–284 (2010). https://doi.org/10.1016/j.wear.2010.04.007CrossRef

Yu, G., Liu, H., Mao, K., Zhu, C., Lu, Z.: Examination on the wear process of polyformaldehyde gears under dry and lubricated conditions. Friction 9, 1–13 (2021). https://doi.org/10.1007/s40544-020-0362-7CrossRef

Yu, G., Liu, H., Mao, K., Zhu, C., Lu, Z.: An experimental investigation on the wear lubricated steel against PEEK gears. J. Tribol. 142, 1–12 (2019). https://doi.org/10.1115/1.4045627CrossRef

Lu, Z., Liu, H., Zhu, C., Song, H., Yu, G.: Identification of failure modes of a PEEK-steel gear pair under lubrication. Int. J. Fatigue 125, 342–348 (2019). https://doi.org/10.1016/j.ijfatigue.2019.04.004CrossRef

Honda, T., Kida, K., Santos, E.C., Kashima, Y.: The influence of surface texture on rolling-contact fatigue of PEEK bearings in water. Advanced Materials Research 154–155, 1713–1716 (2010). https://doi.org/10.4028/www.scientific.net/AMR.154-155.1713CrossRef

Chen, F., Ou, H., Lu, B., Long, H.: A constitutive model of polyether-ether-ketone (PEEK). J. Mech. Behav. Biomed. Mater. 53, 427–433 (2016). https://doi.org/10.1016/j.jmbbm.2015.08.037CrossRef

Garcia-Gonzalez, D., Zaera, R., Arias, A.: A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: application to PEEK under dynamic loading conditions. Int. J. Plast 88, 27–52 (2017). https://doi.org/10.1016/j.ijplas.2016.09.011CrossRef

Rae, P.J., Brown, E.N., Orler, E.B.: The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response. Polymer 48, 598–615 (2007). https://doi.org/10.1016/j.polymer.2006.11.032CrossRef

Brillhart, M., Botsis, J.: Fatigue fracture behaviour of PEEK: 2. Effect of thickness and temperature. Polymer 33, 5225–5232 (1992). https://doi.org/10.1016/0032-3861(92)90805-7CrossRef

10.

Rodriguez, V., Sukumaran, J., Schlarb, A., De Baets, P.: Reciprocating sliding wear behaviour of PEEK-based hybrid composites. Wear 362, 161–169 (2016). https://doi.org/10.1016/j.wear.2016.05.024CrossRef

11.

Zalaznik, M., Kalin, M., Novak, S.: Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer. Tribol. Int. 94, 92–97 (2016). https://doi.org/10.1016/j.triboint.2015.08.016CrossRef

12.

Theiler, G., Gradt, T.: Influence of the temperature on the tribological behaviour of PEEK composites in vacuum environment. J. Phys: Conf. Ser. 100, 072040 (2008)

13.

Theiler, G., Gradt, T.: Environmental effects on the sliding behaviour of PEEK composites. Wear 368, 278–286 (2016). https://doi.org/10.1016/j.wear.2016.09.019CrossRef

14.

Yamamoto, Y., Takashima, T.: Friction and wear of water lubricated PEEK and PPS sliding contacts. Wear 253, 820–826 (2002). https://doi.org/10.1016/S0043-1648(02)00059-5CrossRef

15.

Lu, Z.P., Friedrich, K.: On sliding friction and wear of PEEK and its composites. Wear 181–183, 624–631 (1995). https://doi.org/10.1016/0043-1648(95)90178-7CrossRef

16.

Lin, L., Pei, X.-Q., Bennewitz, R., Schlarb, A.K.: Friction and wear of PEEK in continuous sliding and unidirectional scratch tests. Tribol. Int. 122, 108–113 (2018). https://doi.org/10.1016/j.triboint.2018.02.035CrossRef

17.

Unal, H., Mimaroglu, A.: Friction and wear characteristics of PEEK and its composite under water lubrication. J. Reinf. Plast. Compos. 25, 1659–1667 (2006). https://doi.org/10.1177/0731684406068406CrossRef

18.

Wang, A., Yan, S., Lin, B., Zhang, X., Zhou, X.: Aqueous lubrication and surface microstructures of engineering polymer materials (PEEK and PI) when sliding against Si 3 N 4. Friction 5, 414–428 (2017). https://doi.org/10.1007/s40544-017-0155-9CrossRef

19.

Kónya, L., Váradi, K., Friedrich, K.: Finite element modelling of wear process of a peek-steel sliding pair at elevated temperature. Periodica Polytechnica Mechanical Engineering 49, 25–38 (2005)

20.

Wang, H., Liu, D., Yan, L., Wang, C., Yang, S., Zhu, Y.: Tribological simulation of porous self-lubricating PEEK composites with heat-stress coupled field. Tribol. Int. 77, 43–49 (2014). https://doi.org/10.1016/j.triboint.2014.04.005CrossRef

21.

Sun-Kyu, L., Jae-Heung, Y., et al.: Effect of thermal deformation on machine tool slide guide motion. Tribol. Int. (2003). https://doi.org/10.1016/S0301-679X(02)00128-7CrossRef

22.

Mahdi, R., Stephan, K., Friedrich, B.: Experimental investigations on stick-slip phenomenon and friction characteristics of linear guides. Procedia Engineering 100, 1023–1031 (2015). https://doi.org/10.1016/j.proeng.2015.01.462CrossRef

23.

Yue, H., Deng, J., Ge, D., Li, X., Zhang, Y.: Effect of surface texturing on tribological performance of sliding guideway under boundary lubrication. J. Manuf. Process. 47, 172–182 (2019). https://doi.org/10.1016/j.jmapro.2019.09.031CrossRef

24.

Miki, N., Atsuko, K., Atsushi, K., Koji, M., Takashi, M.: Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions. Tribol. Lett. (2007). https://doi.org/10.1007/s11249-007-9257-2CrossRef

25.

Muraki, M., Tominaga, E.: Frictional properties of some additives for sliding guide way lubricants in a sliding speed range between 0.002 and 1.5 m/s with a thrust collar friction tester. Tribol. Int. (2001). https://doi.org/10.1016/S0301-679X(01)00035-4CrossRef

26.

Mattei, L., Puccio, F.D.: Influence of the wear partition factor on wear evolution modelling of sliding surfaces. Int. J. Mech. Sci. 99, 72–88 (2015). https://doi.org/10.1016/j.ijmecsci.2015.03.022CrossRef

27.

Cook, J.: Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng. Fract. Mech. 21(1), 31–48 (1985). https://doi.org/10.1016/0013-7944(85)90052-9CrossRef

28.

Chen, F., et al.: A constitutive model of polyether-ether-ketone (PEEK). J. Mech. Behav. Biomed. Mater. 53, 427–433 (2016)CrossRef

29.

Garcia-Gonzalez, D., Rusinek, A., Jankowiak, T., Arias, A.: Mechanical impact behavior of polyether-ether-ketone (PEEK). Compos. Struct. 124, 88–99 (2015). https://doi.org/10.1016/j.compstruct.2014.12.061CrossRef

30.

Chen, F., Ou, H., Gatea, S., Long, H.: Hot tensile fracture characteristics and constitutive modelling of polyether-ether-ketone (PEEK). Polym. Testing 63, 168–179 (2017). https://doi.org/10.1016/j.polymertesting.2017.07.032CrossRef

31.

Kónya, L., Váradi, K. Wear simulation of a polymer–steel sliding pair considering temperature- and time-dependent material properties-Chapter 7. (2008), https://doi.org/10.1016/S1572-3364(08)55007-5

32.

Kreith, F., Manglik, R.M.: Principles of Heat Transfer. Cengage Learning, Boston (2016)

33.

Marotta, E., Fletcher, L.S.: Thermal contact conductance of selected polymeric materials. J. Thermophys. Heat Transfer 10, 334–342 (2012). https://doi.org/10.2514/3.792CrossRef

34.

E.Kragelsky, I.V., Dobychin, M.H. and Kombalov, V.S. (1977) Foundations of calculations forfriction and wear, Mashinostroenie (in Russian), Moscow.

35.

Sumer, M., Unal, H., Mimaroglu, A.: Evaluation of tribological behaviour of PEEK and glass fibre reinforced PEEK composite under dry sliding and water lubricated conditions. Wear 265, 1061–1065 (2008). https://doi.org/10.1016/j.wear.2008.02.008CrossRef

36.

Zhang, G., Liao, H., Li, H., Mateus, C., Coddet, C.: On dry sliding friction and wear behaviour of PEEK and PEEK/SiC-composite coatings. Wear 260, 594–600 (2006). https://doi.org/10.1016/j.wear.2005.03.017CrossRef

37.

Friedrich, K., Karger-Kocsis, J., Lu, Z.: Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions. Wear 148, 235–247 (2015). https://doi.org/10.1016/0043-1648(91)90287-5CrossRef

38.

Zhang, G., Yu, H., Zhang, C., Liao, H., Coddet, C.: Temperature dependence of the tribological mechanisms of amorphous PEEK (polyetheretherketone) under dry sliding conditions. Acta Mater. 56, 2182–2190 (2008). https://doi.org/10.1016/j.actamat.2008.01.018CrossRef

Titel: Study of Friction and Wear Characteristics of PEEK by Reciprocating Sliding Experiment and Temperature Dependences Simulation
verfasst von: Kerui Chen
Zehua Lu
Peitang Wei
Huaiju Liu
Dong Wei
Huaijie Xie
Publikationsdatum: 01.12.2022
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 4/2022
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-022-01641-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2022

Frictionless vs. Frictional Contact in Numerical Wear Predictions of Conformal and Non-conformal Sliding Couplings

DLC-Coated Thermoplastics: Tribological Analyses under Lubricated Rolling-Sliding Conditions

Composite Lubricating Films with Silane Coupling Agent-Modified Carbon Nanotubes on a Silicon Substrate with Enhanced Wear-Resistant Properties

On the Role of Roughness in the Indentation of Viscoelastic Solids

Improved Wear Resistance of a Heterogeneous CoCrNi Medium-Entropy Alloy at Cryogenic Temperature

High-Pressure Lubrication of Polyethylethylene by Molecular Dynamics Approach

Premium Partner

Marktübersichten