Study on monomer reactivity ratios of acrylonitrile/itaconic acid in aqueous deposited copolymerization system initiated by ammonium persulfate

A single water-soluble initiator-ammonium persulfate (APS), not containing alkali metal ions, was first utilized to initiate copolymerization of acrylonitrile (AN)/itaconic acid (IA) in aqueous deposited copolymerization system. Monomer reactivity ratios of this polymerization system were investigated using element analysis method and Q–e schemes. It was found that the monomer reactivity ratios of AN/IA calculated from Q–e schemes are 0.505 (r _AN) and 1.928 (r _IA), while the monomer reactivity ratios of AN/IA in aqueous deposited copolymerization system at 60 °C are 0.64 (r _AN) and 1.37 (r _IA) calculated from Kelen–Tüdõs method, 0.61 (r _AN) and 1.47 (r _IA) from Fineman–Ross method. The three pairs of monomer reactivity ratios are in good agreement. With the increase of the polymerization temperature, the monomer reactivity ratios of AN and IA approach to unity, indicating that the aqueous deposited copolymerization of AN/IA has a tendency to ideal copolymerization. At lower polymerization conversion, the monomer reactivity ratios of AN and IA have hardly any changes. When the polymerization conversion is more than 5%, the monomer reactivity ratio of AN increases, while that of IA decreases.