nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Sustainability of Internally-Cured Concrete for Mitigating Shrinkage Cracking Using Service Life Prediction Models

verfasst von : Sara Kalantari, Mohammad Ali Dastan Diznab, Fariborz M. Tehrani

Erschienen in: International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Internal curing using fine lightweight aggregate is an effective method to address early-age cracking. This study focuses on the sustainability of using fine lightweight aggregates for internally curing concrete. Application of fine lightweight aggregates has a positive influence on transport properties of concrete and enhances the durability and service life of concrete infrastructure. These properties contribute to the performance of those infrastructures in various environments and climate zones. This paper highlights the sustainability of internal curing application through cost, energy, and emission analyses based on existing service life prediction models and using transport properties of internally-cured concrete obtained through experimental investigations. Presented methodology covers data acquisition and refinement procedures to perform such analyses. Analysis includes a range of concrete applications to simulate current trends in concrete market. Results highlight quantitative sustainability performance measures, such as energy and emissions in addition to cost and time for selected applications in parking structures and bridge decks.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Numerical Estimation of Crack Openings in Concrete Structures Under Multi-physic Loadings

Nächstes Kapitel Validation of Thermo-hygro-Mechanical FEM Analysis of Thick Restrained RC Members by Comparison with Experiments

Kosmatka, S.H., Panarese, W.C.: Design and Control of Concrete Mixtures. Portland Cement Association (PCA), Skokie, Illinois (2016). www.cement.org

PCA.: Environmental Product Declaration. Portland Cement Association (PCA), Skokie, IL (2016). www.cement.org

Tehrani, F.M.: Deploying and rating sustainable practices for resilient bridge infrastructure. Keynote Lecture. In: Proceedings of The Fifth International Conference on Bridges, December 17–18, 2019, MS05. Amirkabir University of Technology, Tehran, Iran (2019). www.ibc.aut.ac.ir

PCA.: The Real Value of Resilient Constriction. 05.2019. Portland Cement Association (PCA), Skokie, IL (2019). www.cement.org

Nazari, M., Tehrani, F.M., Ansari, M., Jeevanlal, B., Rahman, F., Farshidpour, R.: Green strategies for design and construction of non-auto transportation infrastructure. Report 19–17, Mineta Transportation Institute, San Jose, CA (2019). www.transweb.sjsu.edu

ACI 231R-10.: Report on early-age cracking: causes. In: Measurement and Mitigation. American Concrete Institute (ACI), Farmington Hills, MI (2010). www.concrete.org

ACI 308R-16.: Specification for Curing Concrete. American Concrete Institute (ACI), Farmington Hills, MI (2016). www.concrete.org

Bentz, D.P.: Internal curing of high-performance blended cement mortars. ACI Mater. J. 104(4), 408–414 (2007). www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/18831

Lane, D.S.: Effect of wet curing duration on curability parameters of hydraulic cement concretes. FHWA/VTRC 10-R11. Virginia Transportation Research Council, Richmond, VA, March (2010). vtrc.virginiadot.org/PubDetails.aspx?PubNo=10-R11

10.

Khayat, K.J., Mehdipour, I.: Economical and crack-free high-performance concrete for pavement and transportation infrastructure construction. cmr 17–007. Missouri Department of Transportation, Jefferson City, MO, May (2017). spexternal.modot.mo.gov/sites/cm/CORDT/cmr17-007.pdf

11.

Tankasala, A. and Schindler A. K. Early-age cracking of lightweight mass concrete. ACI Mater. J. 117(1), 223–232 (2020). www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=51719082

12.

ACI 308–213R-13.: Report on internally cured concrete using pre-wetted absorptive lightweight aggregate. American Concrete Institute (ACI), Farmington Hills, MI (2013)

13.

Bonyadian, S., Mohammadi, M., Foroutanmehr, B., Tehrani, F.M.: An experimental investigation of internally-cured concrete application for bridge decks. In: Proceedings of The Fifth International Conference on Bridges, (December 17–18, 2019), MS02, Amirkabir University of Technology, Tehran. Iran (2019). ibc.aut.ac.ir

14.

Henkensiefken, R.: Internal curing in cementitious systems made using saturated lightweight aggregate. Thesis, Purdue University, West Lafayette, IN (2008). docs.lib.purdue.edu/dissertations/AAI1469671

15.

Castro, J.: Moisture transport in cement-based materials: application to transport tests and internal curing. Ph.D. dissertation. Purdue University, West Lafayette, IN (2011). docs.lib.purdue.edu/dissertations/AAI3475407

16.

Roberts, J.W.: The 2004 practice and potential of internal curing of concrete using lightweight sand. In: Advanced in Concrete through Science and Engineering. RILEM Publications S.A.R.L., Bagneux, France, March (2004). https://doi.org/10.1617/2912143926.035

17.

Hoff, G.C. Internal curing of concrete using lightweight aggregate. In: Theodore Bremner Symposium on High Performance Lightweight Concrete, Sixth CANMET/ACI International Conference on Durability, June, pp. 185–203, Thessaloniki, Greece (2003). www.concrete.org

18.

Vosoughi, P., Tritsch, S., Ceylan, H., Taylor, P.C.: Lifecycle cost analysis of internally cured jointed plain concrete pavement. Part of IHRB Project TR-676, Iowa Highway Research Board, Ames, IA (2017). lib.dr.iastate.edu/intrans_reports/222

19.

Thomas, M. D. A. Chloride diffusion in high-performance lightweight aggregate concrete. In: ACI Symposium Paper 234, vol. 50, pp. 797–812 (2006). www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/15974

20.

Maltais, Y., Ouellet, E., Marchand, J., Samson, E., Burke, D.: Prediction of the long-term durability of lightweight aggregate concrete mixtures under severe marine environment. Mater. Struct. 39, 911–918 (2006). https://doi.org/10.1617/s11527-006-9127-7CrossRef

21.

Liu, X., Chia, K.S., Zhang, M.: Development of lightweight concrete with high resistance to water and chloride-ion penetration. Cement Concr. Compos. 32, 757–766 (2010). https://doi.org/10.1016/j.cemconcomp.2010.08.005CrossRef

22.

Ferrer, B., Bogas, J.A., Real, S.: Service life of structural lightweight aggregate concrete under carbonation-induced corrosion. Constr. Build. Mater. 120(1), 161–171 (2016). https://doi.org/10.1016/j.conbuildmat.2016.05.108CrossRef

23.

Real, S., Bogas, J.A., Ferrer, B.: Service life of reinforced structural lightweight aggregate concrete under chloride-induced corrosion. Mater. Struct. 50, 101 (2017). https://doi.org/10.1617/s11527-016-0971-9CrossRef

24.

Zhen, N., Qian, X., Justnes, H., Martius-Hammer, T.A., Tan, K.H., Ong, K.C.G.: Durability of lightweight aggregate concrete in marine structures. ISOPE-I-18-649. In: The 28th International Ocean and Polar Engineering Conference, 10–15 June. International Society of Offshore and Polar Engineers Sapporo, Japan 2018. onepetro.org/ISOPEIOPEC/ISOPE18/conference/All-ISOPE18

25.

Tehrani, F.M., Service life prediction of structural lightweight concrete using transport properties. ESCSI Report 4363, October 2020. Expanded Shale, Clay and Slate Institute, Chicago, IL (2020). www.escsi.org

26.

Bentz, E.C.: Probabilistic modeling of service life for structures subjected to chlorides. ACI Mater. J. 100(5), 391–397 (2003). www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/12814

27.

Alexander, M., Thomas, M.: Service life prediction and performance testing—current developments and practical applications. Cement Concr. Res. 78(Part A), 155–164 (2015). https://doi.org/10.1016/j.cemconres.2015.05.013

28.

fib Bulleting 34.: Model code for service life design. fédération internationale du béton Lausanne, Switzerland (2006). www.fib-international.org

29.

Papworth, F., Matthews. S.: fib Model Code 2020—Durability design and through life management of new and existing structures. In: Proceedings of Sixth International Conference on Durability of Concrete Structures, Paper Number KN04, 18–20 July 2018, Leeds, pp. 53–62. University of Leeds, West Yorkshire, United Kingdom (2018). eps.leeds.ac.uk

30.

Violetta, B.: Life-365 Service Life Prediction Model. Concrete International. December, pp. 53–57 (2002). www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=12376

31.

Ehlen, M.A., Thomas, M.D.A., Bentz, E.C.: Life-365 service life prediction model^TM Version 2.0. Concrete International (May), pp. 41–46 (2009). www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=56508

32.

Life-365.: Life-365TM service life prediction model^TM. Life-365™ Consortium III (2013). www.life-365.org

33.

Ehlen, M.A., Kojundic, A.: Life-365^TM v2.2. Concrete International (May), pp. 41–44 (2014). www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=51686933

34.

Tehrani, F.M., Alexandrou, A., Machoney, M., Adhikari, D., Raymond, M.: Energy inputs and carbon dioxide emissions from construction equipment during construction of a golf course. Int. J. Eng. Res. Innov. 6(2), 78–86 (2014). ijeri.org/IJERI-Archives/issues/fall2014/fall2014.htm

35.

Tehrani, F.M., Dadkhah, M.: A case study on the analysis of energy and emissions for sustainability rating. Int. J. Clim. Change: Impacts Responses 10(3), 13–23 (2018). https://doi.org/10.18848/1835-7156/cgp/v10i03/13-23

36.

Tehrani, F.M., Farshidpour, F., Pouramini, M., Mousavi, M., Esfahani, A.N.: Sustainability rating of lightweight expanded clay aggregates using energy inputs and carbon dioxide emissions in life-cycle analysis. In: Proceedings of Sixth International Symposium on Life Cycle Civil Engineering, (October 2018), pp. 2989–2993. IALCCE, Ghent, Belgium (2018). ialcce2018.ugent.be

37.

Tehrani, F.M., Nazari, M., Truong, D., Farshidpour, R.: Sustainability of tire-derived aggregate concrete: a case study on energy, emissions, economy, and Envision. In: Proceedings of International Conference on Sustainable Infrastructure, November 6–9, 2019, pp. 399–408. American Society of Civil Engineers (ASCE), Los Angeles, CA (2019). https://doi.org/10.1061/9780784482650.043

38.

ASTM C39/C39M-16.: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA (2016). www.astm.org. https://doi.org/10.1520/c0039_c0039m-16

39.

ASTM C1760-12.: Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete. ASTM International, West Conshohocken, PA (2012). www.astm.org. https://doi.org/10.1520/c1760-12

40.

ASTM C1202-17.: Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration. ASTM International, West Conshohocken, PA (2017). www.astm.org. https://doi.org/10.1520/c1202-17

41.

ASTM C1556-11a.: Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion. ASTM International, West Conshohocken, PA (2016). www.astm.org. https://doi.org/10.1520/c1556-11ar16

42.

ASTM C1585-13.: Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes. ASTM International, West Conshohocken, PA (2013). www.astm.org. https://doi.org/10.1520/c1585-13

43.

ASTM C1581/C1581M-18a.: Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage. ASTM International, West Conshohocken, PA (2018). www.astm.org. https://doi.org/10.1520/c1581_c1581m-18a

44.

ASTM C567/C567M-14.: Standard Test Method for Determining Density of Structural Lightweight Concrete. ASTM International, West Conshohocken, PA (2014). www.astm.org. https://doi.org/10.1520/c0567_c0567m-14

45.

NT BUILD 492.: Concrete, Mortar and Cement-Based Repair Materials: Chloride Migration Coefficient from Non-Steady State Migration Experiments. Nordtest, Espoo, Finland (1999). www.nordtest.info

46.

Schwartz, C.W., Elkins, G.E., Li, R., Visintine, B.A., Forman, B., Rada, G.R., Groeger, J.L.: Evaluation of long-term pavement performance (LTPP) climatic data for use in mechanistic-empirical pavement design guide (MEPDG) calibration and other pavement analysis. FHWA-HRT-15-019. Office of Infrastructure Research and Development Federal Highway Administration, McLean, VA (2015). www.fhwa.dot.gov

47.

Peurifoy, R.B., Schexnayder, C.J., Shapira, A., Schmitt, R.L.: Construction Planning, Equipment, and Methods. McGraw-Hill, New York, NY (2018)

48.

ACCO.: The Applied Cost Analysis of Construction Works in Persian. Association of Construction Companies, Tehran, Iran (2004). www.acco.ir

49.

ESCSI.: Embodied Energy to Manufacture Expanded Shale, Clay and Slate (ESCS) Lightweight Aggregate. Information Sheet 9153. Expanded Shale, Clay, and Slate Institute, Chicago, IL. (2015). www.escsi.org

50.

NRMCA.: Environment Product Declaration. National Ready Mixed Concrete Associate, Silver Spring, MD (2020). www.nrmca.org

51.

PCA.: Environmental Product Declaration. Portland Cement Association, Skokie, IL (2016)

52.

Vulcan.: Environmental Product Declaration. Vulcan Materials Company, Western Division, Glendale, CA (2016). www.vulcanmaterials.com

53.

SUDAS.: Roadway Design. Chapter 5, In SUDAS Design Manual. Statewide Urban Design and Specifications Program, IA (2021).www.iowasudas.org/manuals/design-manual

54.

PBO.: Cost Analysis of Referenced Units in Persian. Plan and Budget Organization. Tehran, Iran (2018). www.sama.mporg.ir

55.

Sika.: Sealing and Bonding Environmental Product Declaration—Cradle-to-Gate Sikaflex®-1a. Sika Corporation, Lyndhurst, NJ (2019). www.usa.sika.com

Titel: Sustainability of Internally-Cured Concrete for Mitigating Shrinkage Cracking Using Service Life Prediction Models
verfasst von: Sara Kalantari
Mohammad Ali Dastan Diznab
Fariborz M. Tehrani
Verlag: Springer International Publishing
Buch: International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures
Print ISBN: 978-3-030-72920-2

Electronic ISBN: 978-3-030-72921-9

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-72921-9_23

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"