nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

The Effect of Finish-Milling Operation on Surface Quality and Wear Resistance of Inconel 625 Produced by Selective Laser Melting Additive Manufacturing

verfasst von : Emre Tascioglu, Yusuf Kaynak, Özgur Poyraz, Akın Orhangül, Soner Ören

Erschienen in: Advanced Surface Enhancement

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Additive Manufacturing (AM) has been recognized as a promising manufacturing technology for the industries including aerospace and biomedical; however, the surface finish requirement for the components used in such industries imposes a severe constraint. Thus, finishing process for any manufacturing operation including additive manufacturing needs to be investigated to provide insights into the finish processing-surface property relationship. In this study, finishing operation in milling process is considered as a post-processing to improve the surface, mechanical and wear properties of the specimens fabricated by selective laser melting (SLM). This study demonstrates that surface and subsurface characteristic such as surface topography, surface roughness, microhardness, and wear resistance is substantially affected from milling parameters. Finish-milling operation with the high feed rate results in 50% reduction in wear rate of the specimen fabricated by SLM process.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Surface Integrity Characteristics of NiTiHf High Temperature Shape Memory Alloys

Nächstes Kapitel Toolpath Generation for Robot Filleting

Pleass, C., Jothi, S.: Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by selective laser melting. Addit. Manuf. 24, 419–431 (2018)CrossRef

Ramkumar, K.D., Abraham, W.S., Viyash, V., Arivazhagan, N., Rabel, A.M.: Investigations on the microstructure, tensile strength and high temperature corrosion behaviour of Inconel 625 and Inconel 718 dissimilar joints. J. Manuf. Process. 25, 306–322 (2017)CrossRef

Ezugwu, E.O., Wang, Z.M., Machado, A.R.: The machinability of nickel-based alloys: a review. J. Mater. Process. Technol. 86, 1–16 (1999)CrossRef

Ezugwu, E.O.: Key improvements in the machining of difficult-to-cut aerospace superalloys. Int. J. Mach. Tools Manuf. 45, 1353–1367 (2005)CrossRef

Chen, L., He, Y., Yang, Y., Niu, S., Ren, H.: The research status and development trend of additive manufacturing technology. Int. J. Adv. Manuf. Technol. 89, 3651–3660 (2017)CrossRef

Kundakcıoğlu, E., Lazoglu, I., Poyraz, Ö., Yasa, E., Cizicioğlu, N.: Thermal and molten pool model in selective laser melting process of Inconel 625. Int. J. Adv. Manuf. Technol. 95, 3977–3984 (2018)CrossRef

Witkin, D.B., Adams, P., Albright, T.: Microstructural evolution and mechanical behavior of nickel-based superalloy 625 made by selective laser melting. In: Laser 3D Manufacturing II, p. 93530B. International Society for Optics and Photonics (2015)

Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G.: Inconel 625 lattice structures manufactured by selective laser melting (SLM): mechanical properties, deformation and failure modes. Mater. Des. 157, 179–199 (2018)CrossRef

Gonzalez, J., Mireles, J., Stafford, S., Perez, M., Terrazas, C., Wicker, R.: Characterization of Inconel 625 fabricated using powder-bed-based additive manufacturing technologies. J. Mater. Process. Technol. 264, 200–210 (2019)CrossRef

10.

Marchese, G., Garmendia Colera, X., Calignano, F., Lorusso, M., Biamino, S., Minetola, P., Manfredi, D.: Characterization and comparison of Inconel 625 processed by selective laser melting and laser metal deposition. Adv. Eng. Mater. 19, 1600635 (2017)CrossRef

11.

Fang, X., Li, H., Wang, M., Li, C., Guo, Y.: Characterization of texture and grain boundary character distributions of selective laser melted Inconel 625 alloy. Mater. Charact. 143, 182–190 (2018)CrossRef

12.

Li, C., White, R., Fang, X., Weaver, M., Guo, Y.: Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment. Mater. Sci. Eng.: A 705, 20–31 (2017)CrossRef

13.

Li, C., Guo, Y., Zhao, J.: Interfacial phenomena and characteristics between the deposited material and substrate in selective laser melting Inconel 625. J. Mater. Process. Technol. 243, 269–281 (2017)CrossRef

14.

Bourell, D., Kruth, J.P., Leu, M., Levy, G., Rosen, D., Beese, A.M., Clare, A.: Materials for additive manufacturing. CIRP Ann. 66, 659–681 (2017)CrossRef

15.

Witkin, D., Helvajian, H., Steffeney, L., Hansen, W.: Laser post-processing of Inconel 625 made by selective laser melting. In: Laser 3D Manufacturing III, p. 97380W. International Society for Optics and Photonics (2016)

16.

Brown, D., Li, C., Liu, Z., Fang, X., Guo, Y.: Surface integrity of Inconel 718 by hybrid selective laser melting and milling. Virtual Phys. Prototyp. 13, 26–31 (2018)CrossRef

17.

ASTM F 3056: Standard specification for additive manufacturing nickel alloy (UNS N06625) with powder bed fusion, ASTM (2014)

18.

Moussaoui, K., Rubio, W., Mousseigne, M., Sultan, T., Rezai, F.: Effects of selective laser melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties. Mater. Sci. Eng.: A 735, 182–190 (2018)CrossRef

19.

Akhtar, W., Sun, J., Chen, W.: Effect of machining parameters on surface integrity in high speed milling of super alloy GH4169/Inconel 718. Mater. Manuf. Process. 31, 620–627 (2016)CrossRef

20.

Li, W., Guo, Y., Barkey, M., Jordon, J.: Effect tool wear during end milling on the surface integrity and fatigue life of Inconel 718. Procedia CIRP 14, 546–551 (2014)CrossRef

21.

Brinksmeier, E., Levy, G., Meyer, D., Spierings, A.: Surface integrity of selective-laser-melted components. CIRP Ann. 59, 601–606 (2010)CrossRef

22.

Kaynak, Y., Kitay, O.: Porosity, surface quality, microhardness and microstructure of selective laser melted 316L stainless steel resulting from finish machining. J. Manuf. Mater. Process. 2, 36 (2018)

23.

Sharma, S., Sangal, S., Mondal, K.: On the optical microscopic method for the determination of ball-on-flat surface linearly reciprocating sliding wear volume. Wear 300, 82–89 (2013)CrossRef

Titel: The Effect of Finish-Milling Operation on Surface Quality and Wear Resistance of Inconel 625 Produced by Selective Laser Melting Additive Manufacturing
verfasst von: Emre Tascioglu
Yusuf Kaynak
Özgur Poyraz
Akın Orhangül
Soner Ören
Verlag: Springer Singapore
Buch: Advanced Surface Enhancement
Print ISBN: 978-981-15-0053-4

Electronic ISBN: 978-981-15-0054-1

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-981-15-0054-1_27

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht