nach oben

Journal of Sol-Gel Science and Technology

Erschienen in:

16.05.2020 | Original Paper: Sol-gel, hybrids and solution chemistries

The effect of MgO addition on the properties of alumina-based ceramic cores prepared via sol–gel process

verfasst von: Shaghayegh Shabani, Rahim Naghizadeh, Mohsen Fallah Vostakola, Farhad Golestanifard

Erschienen in: Journal of Sol-Gel Science and Technology | Ausgabe 3/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Alumina-based ceramic cores with MgO addition were prepared using sol–gel process. Prior to magnesia addition, the suitable amount of titania content was determined in the previous research, where it was found that the body with 15 wt% titania had the most suitable properties. The effect of magnesia addition on mechanical, physical, thermal, chemical, and microstructural properties of the cores was investigated through adding MgTi₂O₅ and sintering the bodies at two temperatures (1400 and 1500 °C) for two different soaking times (1 and 2 h). According to the results of flexural strength test, apparent porosity measurement, leaching test, and microstructural properties of the sintered bodies, the body which contained 15 wt% titania and 4 wt% magnesia had the least sintering shrinkage (~2%), suitable apparent porosity (~30%), acceptable flexural strength (40 MPa), good thermal expansion coefficient (~4.3 × 10⁻⁶ °C⁻¹), and also exhibited a suitable leaching behavior.

Vorheriger Artikel Study on microstructural and electro-optical properties of sol–gel derived pure and Al/Cu-doped ZnO thin films

Nächster Artikel Reverse microemulsion synthesis of mixed α and β phase NaYF4:Yb,Er nanoparticles: calcination induced phase formation, morphology, and upconversion emission

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Pradyumna R (2012) Ceramic cores for turbine blades: a tooling perspective. Int J Mech Ind Eng 2:2231–6477

Zhou PP, Wu GQ, Tao Y et al. (2018) Microstructures and performance of CaO-based ceramic cores with different particle size distributions for investment casting. Mater Res Express 5:025202–025211CrossRef

Wereszczak AA, Breder K, Ferber MK et al. (2002) Dimensional changes and creep of silica core ceramics used in investment casting of superalloys. J Mater Sci 37:4235–4245. https://doi.org/10.1023/A:1020060508311CrossRef

Qin Y, Pan W (2010) A model alumina based investment casting ceramic core body system. J Mater Sci Eng Adv Technol 2:11–25

Maki R, Suzuki Y (2013) Microstructure and mechanical properties of MgO-doped Al2TiO5 prepared by reactive sintering. J Ceram Soc Jpn 121:568–571CrossRef

Kazemi A, Faghihi-Sani MA, Alizadeh HR (2013) Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting. J Eur Ceram Soc 33:3397–3402. https://doi.org/10.1016/j.jeurceramsoc.2013.06.025CrossRef

Manivannan R, Kumar A, Subrahmanyam C (2013) Aqueous gelcasting of fused silica using colloidal silica binder. J Am Ceram Soc 96:2432–2436. https://doi.org/10.1111/jace.12448CrossRef

Wang F, Li F, He B et al. (2013) Gel-casting of fused silica based core packing for investment casting using silica sol as a binder. J Eur Ceram Soc 33:2745–2749. https://doi.org/10.1016/j.jeurceramsoc.2013.04.002CrossRef

Qin Y, Pan W (2009) Effect of silica sol on the properties of alumina-based ceramic core composites. Mater Sci Eng A 508:71–75. https://doi.org/10.1016/j.msea.2008.12.016CrossRef

10.

Wu HH, Li DC, Tang YP et al. (2011) Improving high temperature properties of alumina based ceramic cores containing yttria by vacuum impregnating. Mater Sci Technol 27:823–828. https://doi.org/10.1179/026708309X12506933873062CrossRef

11.

Low IM, Lim FW, Low SS (1993) Synthesis of highly leachable gel-derived alumina ceramic cores. J Mater Sci Lett 12:1570–1573. https://doi.org/10.1007/BF00627016CrossRef

12.

Kazemi A, Faghihi-Sani MA, Nayyeri MJ et al. (2014) Effect of zircon content on chemical and mechanical behavior of silica-based ceramic cores. Ceram Int 40:1093–1098. https://doi.org/10.1016/j.ceramint.2013.06.108CrossRef

13.

Frank GR, Canfield KA, Wright TR (1987) Alumina-based core containing yttria. Howmet Corp. United States Patents 4837187A

14.

Raharjo J, Rahayu S, Mustika T et al. (2015) Effect of TiO2 and MgO on microstructure of α-alumina ceramics and its sintering behavior. Adv Mater Res 1112:519–523. https://doi.org/10.4028/www.scientific.net/AMR.1112.519CrossRef

15.

Wang D, Ismail NF, Badarulzaman NA (2012) Effect of MgO additive on microstructure of Al2O3. Adv Mater Res 488–489:335–339. https://doi.org/10.4028/www.scientific.net/AMR.488-489.335CrossRef

16.

Chao CH, Lu HY (2002) Optimal composition of zircon—fused silica ceramic cores for casting superalloys. J Am Ceram Soc 79:773–779. https://doi.org/10.1111/j.1151-2916.2002.tb00171.xCrossRef

17.

Shah DN, Beals JT, Marcin Jr JJ, Murray SD (2003) Cores for use in precision investment casting. Sherwood Refractories Inc. United States Patents 4093017A

18.

Kryachek VM (2004) Injection moulding (review). Powder Metall Met Ceram 43:336–348. https://doi.org/10.1023/B:PMMC.0000048127.24809.d3CrossRef

19.

Shabani S, Naghizadeh R, Golestanifard F et al. (2019) Effect of TiO2 addition on microstructure and mechanical properties of alumina-based cores prepared by sol-gel method. Int J Appl Ceram Technol 16:2409–2418. https://doi.org/10.1111/ijac.13268CrossRef

20.

Liu F, Fan Z, Liu X et al. (2016) Aqueous gel casting of water-soluble calcia-based ceramic core for investment casting using epoxy resin as a binder. Int J Adv Manuf Technol 86:1235–1242. https://doi.org/10.1007/s00170-015-8227-3CrossRef

21.

Wei N, Guan Y, Wu H et al. (2016) Fabrication of Yb3+-doped YAG transparent ceramics by aqueous gelcasting. J Sol-Gel Sci Technol 77:211–217. https://doi.org/10.1007/s10971-015-3846-6CrossRef

22.

Dhara S, Kamboj RK, Pradhan M, Bhargava P (2002) Shape forming of ceramics via gelcasting of aqueous particulate slurries. Bull Mater Sci 25:565–568. https://doi.org/10.1007/BF02710552CrossRef

23.

Omatete OO, Janney MA, Nunn SD (1997) Gelcasting: from laboratory development toward industrial production. J Eur Ceram Soc 17:407–413. https://doi.org/10.1016/S0955-2219(96)00147-1CrossRef

24.

Wan W, Yang J, Zeng J, Qiu T (2013) Gelcasting of fused silica glass using a low-toxicity monomer DMAA. J Non Cryst Solids 379:229–234. https://doi.org/10.1016/j.jnoncrysol.2013.08.017CrossRef

25.

Tang Y, Ji Z, Jia C et al. (2016) Effect of particle size on non-aqueous gel-casting process for copper powder. J Sol-Gel Sci Technol 79:530–534. https://doi.org/10.1007/s10971-016-4159-0CrossRef

26.

Crisan M, Zaharescu M, Jitianu A, Crisan D (2000) Sol-gel poly-component nano-sized oxide powders. J Sol-Gel Sci Technol 19:409–412CrossRef

27.

Watchman JB, Cannon WR, Matthewon MJ (2009) Mechanical properties of ceramics, second edn. Wiley, New Jersey

28.

Kong D, Yang H, Wei S et al. (2007) Gel-casting without de-airing process using silica sol as a binder. Ceram Int 33:133–139. https://doi.org/10.1016/j.ceramint.2005.08.006CrossRef

29.

Kong D, Yang H, Yang Y et al. (2007) De-stabilization mechanism and in situ solidification of alumina slurry dispersed in silica sol. J Mater Process Technol 182:489–497. https://doi.org/10.1016/j.jmatprotec.2006.09.008CrossRef

30.

Zhu X, Jiang D, Tan S, Zhang Z (2001) Dispersion properties of alumina powders in silica sol. J Eur Ceram Soc 21:2879–2885. https://doi.org/10.1016/S0955-2219(01)00229-1CrossRef

31.

Buscaglia V, Caracciolo F, Leoni M et al. (1997) Synthesis, sintering and expansion of resistant to thermal decomposition. J Mater Sci 32:6525–6531. https://doi.org/10.1023/A:1018611311015CrossRef

32.

Roinne A, Mansikka J, Bjorklund P (1974–2006) HSC Chemistry, Thermodynamic software

33.

Xu G, Tu C, Weng W et al. (2007) Synthesis of aluminum titanate solid solution by solid state reaction of fine commercial Al2O3, TiO2, and MgO powders. Key Eng Mater 336–338:1327–1330. https://doi.org/10.4028/www.scientific.net/KEM.336-338.1327CrossRef

34.

Suzuki Y, Shinoda Y (2011) Magnesium dititanate (MgTi2O5) with pseudobrookite structure: a review. Sci Technol Adv Mater 12:034301–034306. https://doi.org/10.1088/1468-6996/12/3/034301CrossRef

35.

Suzuki Y, Morimoto M (2010) Uniformly porous MgTi2O5 with narrow pore-size distribution: in situ processing, microstructure and thermal expansion behavior. J Ceram Soc Jpn 118:1212–1216CrossRef

36.

Kim D, Kim H, Kim H et al. (2014) Mechanical properties of Al2TiO5 ceramics for high temperature application. Curr Nanosci 10:154–158. https://doi.org/10.2174/1573413709666131109005012CrossRef

37.

Ziegler G (1985) Microstructural aspects of thermal stress resistance of high-strength engineering ceramics* part I: data of thermal stress resistance of high-strength engineering ceramics. Mater Sci Eng Technol 16:12–18

38.

Aball S (2011) Effect of TiO2 doping on microstructural properties of Al2O3-based single crystal ceramics. J Ceram Process Res 12:21–25

Titel: The effect of MgO addition on the properties of alumina-based ceramic cores prepared via sol–gel process
verfasst von: Shaghayegh Shabani
Rahim Naghizadeh
Mohsen Fallah Vostakola
Farhad Golestanifard
Publikationsdatum: 16.05.2020
Verlag: Springer US
Erschienen in: Journal of Sol-Gel Science and Technology / Ausgabe 3/2020
Print ISSN: 0928-0707
Elektronische ISSN: 1573-4846
DOI: https://doi.org/10.1007/s10971-020-05300-4

Original Paper: Sol-gel and hybrid materials with surface modification for applications

Effect of the addition of calcium salts on the structure and anticorrosion properties of siloxane-poly(hydroxyethyl methacrylate) hybrid coating applied on Ti-6Al-4V alloy

Original Paper: Sol–gel and hybrid materials for energy, environment and building applications

Effects of NaOH amount on condensation mechanism to form aluminosilicate, case study of geopolymer gel synthesized via sol–gel method

Original Paper: Sol–gel and hybrid materials for energy, environment and building applications

Engineered surface properties of MAPI using different antisolvents for hole transport layer-free perovskite solar cell (HTL-free PSC)

Original Paper: Sol–gel and hybrid materials with surface modification for applications

Preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/micro-sized silica composites possessing superoleophilic/superhydrophobic characteristic: application to selective removal of aromatic compounds from aqueous methanol solution by using these composites

Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications

Study on microstructural and electro-optical properties of sol–gel derived pure and Al/Cu-doped ZnO thin films

Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications

Reverse microemulsion synthesis of mixed α and β phase NaYF4:Yb,Er nanoparticles: calcination induced phase formation, morphology, and upconversion emission

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht