nach oben

Metallurgist

Erschienen in:

09.08.2022

The Influence of Heat Treatment on Structural and Mechanical Properties of the Tool Steel

verfasst von: O. M’ghari, O. Ben Lenda, A. Ibnlfassi, Y. Ait Yassine, E. Saad

Erschienen in: Metallurgist | Ausgabe 3-4/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present research work aims to study the heat treatment effect on the structural and mechanical properties of the tool steel AISI D2. The steel has undergone a double treatment. First, the iron-based alloy was subjected to a normalizing, the explored temperatures are 975, 1025 and 1075°C for a holding time of 1 hour. Then, the steel is annealed at temperatures ranging from 250 to 650°C for 2 hours. The structural and mechanical properties of the tool steel AISI D2 was studied by several experimental methods: hardness measurement, optical microscopy, scanning electron microscopy and X-ray diffraction. After the heat treatments, the mechanical properties of the steel decreased compared to as-received state. According to the microscopic study, the softening is due to the precipitation of cementite present as spherical and isolated particles in a matrix of ferrite.

Vorheriger Artikel Structural and Fractographic Features of XVIII Century Damascus Knife Blade Fractures with Impact Bending

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R. Tuttle, “Alloy steels,” Metals (Basel), 8, No. 2, 10–12 (2018).CrossRef

G. Meetham and M. Van de Voorde, Materials for High Temperature Engineering Applications, Springer Science & Business Media, Berlin (2000).CrossRef

C. Suryanarayana, “Recent developments in mechanical alloying,” Rev. Adv. Mater. Sci., 18, No. 3, 203–211 (2008).

H. Luo, J. Shi, C. Wang, W. Cao, X. Sun, and H. Dong, “Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel,” Acta Mater., 59, No. 10, 4002–4014 (2011).CrossRef

E. Cerri, E. Evangelista, S. Spigarelli, P. Cavaliere, and F. Dericcardis, “Effects of thermal treatments on microstructure and mechanical properties in a thixocast 319 aluminum alloy,” Mater. Sci. Eng. A., 284, 254–260 (2000).CrossRef

F. C. Campbell, Metals Fabrication: Understanding the Basics, ASM International, Ohio (2013).CrossRef

O. Ben lenda, A. Tara, F. Lazar, O. Jbara, A. Hadjadj and E. Saad, “Structural and mechanical characteristics of AISI 420 stainless steel after annealing,” Strenght of Materials, 52, No. 1, 71–80 (2020).

H. Ma, P. Zhou, and J. Du, “Effect of heat treatment on mechanical properties of NM500 steel,” Jinshu Rechuli/Heat Treat. Met., 40, No. 8, 159–163 (2015).

H. Springer, A. Kostka, J. F. dos Santos, and D. Raabe, “Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys,” Mater. Sci. Eng. A, 528, No. 13–14, 4630–4642 (2011).CrossRef

10.

G. Ramesh, R. Rahul, M. Pradeep, P. Sreehari, and R. K. S, “Evolution of microstructure and mechanical properties of D2 tool steel during annealing heat treatment,” Mater. Today Proc., 5, No. 1, 2733–2737 (2018).

11.

C. Henrik, P. Stratton, and K. Lingenho, “The effect of some heat treatment parameters on the dimensional stability of AISI D2,” Cryogenics, 48, 42–47 (2008).CrossRef

12.

K. J. Albutt, S. Garber, “Effect of heating rate on the elevation of critical temperatures of low carbon mild steel,” Iron Steel Inst., 1217–1222 (1966).

13.

R. M. German, “Coarsening in sintering: Grain shape distribution, grain size distribution, and grain growth kinetics in solid-pore systems,” Crit. Rev. Solid State Mater. Sci., 35, No. 4, 263–305 (2010).CrossRef

14.

W. C. Oliver and G. M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7, No. 6, 1564–1583 (1992).CrossRef

15.

F. C. Campbell, Metallography and Microstructures, ASM Handbook, Ohio (2004).

16.

Y. L. Chiu and A. H. W. Ngan, “Time-dependent characteristics of incipient plasticity in nanoindentation of a Ni₃Al single crystal,” Acta Mater., 50, No. 6, 1599–1611 (2002).CrossRef

Titel: The Influence of Heat Treatment on Structural and Mechanical Properties of the Tool Steel
verfasst von: O. M’ghari
O. Ben Lenda
A. Ibnlfassi
Y. Ait Yassine
E. Saad
Publikationsdatum: 09.08.2022
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 3-4/2022
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-022-01351-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2022

Aspects of the Phase-Structural State of Carbon Steels Processed by Deformation Cutting

Structural and Fractographic Features of XVIII Century Damascus Knife Blade Fractures with Impact Bending

Mathematical Model of the Accelerated Cooling of Metal in Thick-Plate Hot Rolling

Mechanical Properties and Wear Resistance of Microarc Diffusion Coatings on Steel

Application of an Analytical Calculation Methodology in the Development of Pipeline Fitting Welding Modes

Creation of an Effective Technology for the Production of Cold-Rolled High-Strength Low-Alloy Steels with High and Stable Properties. Part 1. Hot-rolled Products

Premium Partner

Marktübersichten