Tribological Behavior of Amorphous and Crystalline Overbased Calcium Sulfonate as Additives in Lithium Complex Grease

The aim of this study was to examine the tribological behavior of amorphous overbased calcium sulfonate (AOBCS) and crystalline overbased calcium sulfonate (COBCS, transformed from the AOBCS) as additives in lithium complex grease. The transformation product of the calcium carbonate polymorph from AOBCS was calcite, as determined by Fourier transform infrared spectroscopy. Tribological properties were evaluated by an oscillating reciprocating friction and wear tester and a four-ball tester. The results showed that the addition of COBCS can dramatically improve both the antiwear performance and the friction-reducing and load-carrying properties of the base grease. However, improvement of the tribological properties of the base grease by AOBCS was highly dependent on the concentrations added and the loads applied. The tribological properties of the base grease were improved more by the addition of COBCS than by the addition of AOBCS. X-ray photoelectron energy spectrometry and thermogravimetric analysis revealed that both AOBCS and COBCS underwent complicated tribochemical reactions in the base grease and that chemically reactive films consisting of CaCO₃, CaO, iron oxide and organic compounds were formed on the worn surfaces. Taken together with the results of the tribo-tests, we suggest that transformation of the calcium carbonate polymorphs was the main factor in improving the tribological properties of lithium complex grease. The transformation of calcium carbonate polymorphs can broaden the application of AOBCS as an extreme pressure/antiwear additive in greases under boundary lubrication conditions.