nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population

verfasst von : Takashi Kuboki, Atsushi Shirayori, Masaaki Mizumura, Noah Utsumi, Yeong-Maw Hwang

Erschienen in: Forming the Future

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Technologies for forming and fabricating tubes have been contributing to the development of society, and should evolve and have great roles in the future societies, considering the problems on environment and population. Global warming is a critical problem and the average temperature in the world is still increasing. The world population number is stopping rapid increase accompanying with decreasing birthrate, resulting in aging society. Tubes have advantages of high rigidity for a unit weight and could manufacture light-weight components for transport equipment. The technologies are utilized for forming parts in medical devices. The technologies on tubes should contribute for solving these problems and realizing sustainable societies. This paper introduces the author’s technologies and reviews others’ recent technologies on tubes. The technologies include hydro and air forming, rotary forming, bending, micro forming and so on. These technologies are qualitatively evaluated in terms of conflicting characteristics, such as formability, strength, productivity, flexibility and miniaturization. Some technologies are emerging to improve some of the conflicting characteristics at the same time for realizing excellent performances of the formed products.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Validation of Automatically Generated Forging Sequences by Using FE Simulations

Nächstes Kapitel Multi-objective Sizing Optimization of Elbow-Bar Driving Mechanism of Cold Forging Press

IPCC (Intergovernmental Panel on Climate Change) Climate Report 2018, Global warming of 1.5°

Report from Department of Economic and Social Affairs of United Nations, World population prospects 2019

Chatti S, Hermes M, Tekkaya A, Kleiner M (2010) The new TSS bending process: 3d bending of profiles with arbitrary cross-sections. CIRP Ann - Manuf Technol 59(1):315–318CrossRef

Nogiwa K, Ishizuka M, Ide A, Ueno N (2017) Proceedings of the 68th Japanese Joint Conference for the Technology of Plasticity, 411–412

Tekkaya AE, Brosius A, Homberg, W (2015) 60 excellent inventions in metal forming, vii-ix, Springer

Ogura T, Ueda T, Takagi R (1966) On the application of a hydraulic bulging process. Industrie-Anzeige 88(769–772):1001–1004

U.S. Patent, 1940, No. 2203868

Matsubara S (1994) Incremental nosing of a circular tube with a hemispherical head tool - a study of a numerical control forming system 1 -. J Jpn Soc Technol Plast. 35–398:256–261 in Japanese

Matsubara S (1994) Incremental backward bulge forming of a sheet metal with a hemispherical head tool - a study of a numerical control forming system 2 -. J Jpn Soc Technol Plast. 35–406:1311–1316 in Japanese

10.

Matsui K, Terada K, Akiyama M, Kuboki T, Kusaka K, Oikawa K (2002) Influence of the micro-structure of carbon steel on the yield stress and the properties of strain hardening, J Jpn Soc Civil Engrs. Appl Mech 5:175–183 in JapaneseCrossRef

11.

Manabe K, Chen X, Kobayashi D, Tada K (2014) Development of in-process fuzzy control system for t-shape tube hydroforming. Procedia Engineering 81:2518–2523CrossRef

12.

Manabe K, Chen X, Kobayashi D, Tada K (2013) Weight reduction of axle-housings using high-expansion-ratio hydroforming technology, Proceedings of the 6th International Conference on Tube Hydroforming, Jeju, Korea, 68–72

13.

Hwang Y, Hsieh SY, Kuo N (2016) Study of large-expansion-ratio tube hydroforming with movable dies. Key Eng Mater 725:616–622CrossRef

14.

Mori K, Bariani P, Behrens B, Brosius A, Bruschi S, Maeno T, Merklein M, Yanagimoto J (2017) Hot stamping of ultra-high strength steel parts. CIRP Ann - Manuf Technol 66(2):755–777CrossRef

15.

Maeno T, Mori K, Adachi K (2014) Gas forming of ultra-high strength steel hollow part using air filled into sealed tube and resistance heating. J Mater Process Technol 241–1:97–105CrossRef

16.

Manabe K, Chen X, Kobayashi D, Tada K (2019) Development of staf (steel tube air forming) process, Proceedings of 7th International conference on Hot sheet metal forming of high-performance steel, Lulea, Sweden, A7–2nd paper

17.

Manabe K (1989) Research trends on tube-end forming. J Jpn Soc Technol Plast. 30–339:481–488 in Japanese

18.

Murata M, Kuboki T (2005) Compression spinning of circular magnesium tube using heated roller tool, J Mater Process Technol. 1(162-163):540-545

19.

Manabe K, Chen X, Kobayashi D, Tada K (1999) Proceedings of the 50 h Japanese Joint Conference for the Technology of Plasticity, 173-174, in Japanese

20.

Oezer A, Sekiguchi A, Arai H (2012) Experimental implementation and analysis of robotic metal spinning with enhanced trajectory tracking algorithms. Robot Comput-Integr Manuf 28–4:539–550CrossRef

21.

Kitazawa K, Kobayashi M, Maruno H (1988) Fitness of circular tube end to tool-envelope-surface in flaring and nosing by orbitally rotary forming. J Jpn Soc Technol Plast. 29–330:767–774 in Japanese

22.

Kitazawa K (2015) Prevention of curling in orbital rotary flanging of 1050 and 5052 aluminum alloy tube-ends. J Jpn Inst Light Met. 65–1:2–6 in JapaneseCrossRef

23.

Kuboki T, Abe M, Yamada Y, Murata M (2015) Flexible rotary reduction of tube tips by dies with relief surfaces for attaining high forming limit and productivity. CIRP Ann - Manuf Technol 64(1):269–272CrossRef

24.

Oba W, Imaizumi Y, Kajikawa S, Kuboki T (2018) Two-step forming for improvement of forming limit in rotary nosing with relieved die for fabrication of axisymmetric and eccentric nosed tubes. J Mater Process Technol 262:350–358CrossRef

25.

Saito Y, Utsumi N, Yoshida M (2019) Suppression of undesirable phenomenon of thin-walled rectangular tube in rotary draw bending, Proceedings of the 9th International Conference on Tube Hydroforming, 75–80

26.

Kuboki, T., Furugen, M., Osaka, S., Ono, T., 1998, Development of die-less bending process for precision u-bent tube, The 7th International Conference on Steel Rolling, Chiba, 981–987

27.

Murata M, Ohashi N, Suzuki H (1989) New flexible penetration bending of a tube: 1st report, a study of mos bending method. Trans JSME ser C 55–517:2488–2492 in JapaneseCrossRef

28.

Tekkaya, A.E., Brosius, A., Homberg, W., 2015, 60 excellent inventions in metal forming, 363–368, Springer

29.

Shimada N, Tomizawa A, Kubota H, Mori H, Hara M, Kuwayama S (2014) Development of three-dimensional hot bending and direct quench technology. Procedia Engineering 81:2267–2272CrossRef

30.

Tadano K, Kawashima K, Kojima K, Tanaka N (2010) Development of a pneumatic surgical manimpulator IBIS IV. J. of Robotics and Mechatronics 22–2:179–188CrossRef

31.

Kuboki T, Muraoka T, Tsubouchi T, Kajikawa S (2017) Upset of bent wire/tube for fabrication of in-plane bent sheet metals with extremely large breadth and small bending radius. CIRP Ann - Manuf Technol 66(1):277–280CrossRef

32.

Shirayori A, Ando T, Narazaki M, Usui M (2013) Effect of initial thickness on cross-shaped-tube hydroforming of small-diameter tubing. J Jpn Soc Technol Plast. 54–634:988–992 in JapaneseCrossRef

33.

Mori S, Sato H, Itai K, Manabe K (2017) Development of microtube hydroforming system and its application to cross-shaped microtube. J Jpn Soc Technol Plast. 58–672:72–77 in JapaneseCrossRef

34.

Furushima T, Manabe K (2018) Large reduction die-less mandrel drawing of magnesium alloy micro-tubes. CIRP Ann - Manuf Technol 67(1):309–312CrossRef

35.

Milenin A, Kustra P, Furushima T, Du P, Němeček J (2018) Design of the laser dieless drawing process of tubes from magnesium alloy using fem model. J Mater Process Technol 262:65–74CrossRef

36.

Iwasaki K, Kuriyama Y, Kondoh S, Shirayori A (2018) Structuring engineers’ implicit knowledge of forming process design by using a graph model. Procedia CIRP 67:563–568CrossRef

37.

Watanabe I, Setoyama D, Iwata N (2011) Influence of the micro-structure of carbon steel on the yield stress and the properties of strain hardening. COMPLAS XI, Barcelona, pp 1–12

38.

Horikoshi Y, Kuboki T, Murata M, Matsui K, Tsubokura M (2015) Die design for deep drawing with high-pressured water jet utilizing computer fluid dynamics based on Reynolds’ equation. J Mater Process Technol 218:99–106CrossRef

39.

Utsumi N, Saito Y, Yoshida M (2020) Deformation property in bending process of uneven thickness tube. CAMP-ISIJ 52:D21 in Japanese

40.

Wu Y, Liu G, Wang K, Liu Z, Yuan S (2017) The deformation and microstructure of Ti-3Al-2.5 V tubular component for non-uniform temperature hot gas forming. Int J Adv Manuf Technol 88:2143–2152CrossRef

Titel: Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population
verfasst von: Takashi Kuboki
Atsushi Shirayori
Masaaki Mizumura
Noah Utsumi
Yeong-Maw Hwang
Verlag: Springer International Publishing
Buch: Forming the Future
Print ISBN: 978-3-030-75380-1

Electronic ISBN: 978-3-030-75381-8

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-75381-8_239

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten