Skip to main content

2013 | OriginalPaper | Buchkapitel

Use of Acoustic Emission Signal and X-ray Diffraction Analysis for Detection of Microstructural Changes in Cyclically Loaded AlMg Alloys

verfasst von : P. Mazal, P. Liskutin, F. Vlasic, F. Hort, J. Fiala

Erschienen in: Nondestructive Testing of Materials and Structures

Verlag: Springer Netherlands

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This paper summarizes basic experimental results of microstructural changes during high cycle fatigue loading of AlMg alloys (EN AW-6082 and EN AW-2017). These changes are detected by using of acoustic emission (AE) method. The authors targeted the main attention on more exact identification of causes of changes of AE signal activity in the stage of fatigue damage cumulation. The method of X-ray diffraction analysis of the structure is used for explanation of this phenomenon. The results of presented experimental works indicate the connections between changes of acoustic emission signal and cyclical changes of so called “mosaic blocks” of the crystal structure identified by means of X-rays diffraction during fatigue loading of material.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
[1].
Zurück zum Zitat Michna, S. et al. Aluminium materials and technologies from A to Z, Adin Ltd., Presov 2007, Slovakia, 620 p., ISBN 987-80-89244-18-8. Michna, S. et al. Aluminium materials and technologies from A to Z, Adin Ltd., Presov 2007, Slovakia, 620 p., ISBN 987-80-89244-18-8.
[2].
Zurück zum Zitat Mathis, K. et al.: Investigation of some magnesium alloys by use of the acoustic emission technique, Material Science and Engineering A 387–389 (2004), p. 331–335. Mathis, K. et al.: Investigation of some magnesium alloys by use of the acoustic emission technique, Material Science and Engineering A 387–389 (2004), p. 331–335.
[3].
Zurück zum Zitat Fiala, J. et al. Monitoring of fatigue damage by X-ray diffraction and AE. NDT Welding Bulletin Special Issue 2008, Vol. 18, 2008, p. 11–13, ISSN 1213–3825. Fiala, J. et al. Monitoring of fatigue damage by X-ray diffraction and AE. NDT Welding Bulletin Special Issue 2008, Vol. 18, 2008, p. 11–13, ISSN 1213–3825.
[4].
Zurück zum Zitat Fewster, P.J., Andrew N.L.: Reciprocal space mapping and ultrahigh resolution diffraction of polycrystalline materials. In: Defect and microstructure analysis by diffraction, Snyder R.L., Fiala, J., Bunge, H.J. (eds.), Oxford University Press, New York, 1999, p. 346–364. Fewster, P.J., Andrew N.L.: Reciprocal space mapping and ultrahigh resolution diffraction of polycrystalline materials. In: Defect and microstructure analysis by diffraction, Snyder R.L., Fiala, J., Bunge, H.J. (eds.), Oxford University Press, New York, 1999, p. 346–364.
[5].
Zurück zum Zitat Fiala, J., Kolega, M.: Application of two-dimensional detectors in x-ray diffraction materials structure analysis, Particle and Particle Systems Characterization 22, 2005, p. 397–400.CrossRef Fiala, J., Kolega, M.: Application of two-dimensional detectors in x-ray diffraction materials structure analysis, Particle and Particle Systems Characterization 22, 2005, p. 397–400.CrossRef
[6].
Zurück zum Zitat Mazal, P., Vlasic, F. Application of Selected NDT Procedures for more Detailed Identification of Crack Initiation Stage at Fatigue Tests of Al Alloys. In: Fatigue Design, 2009, CETIM Senlis, November 2009. Mazal, P., Vlasic, F. Application of Selected NDT Procedures for more Detailed Identification of Crack Initiation Stage at Fatigue Tests of Al Alloys. In: Fatigue Design, 2009, CETIM Senlis, November 2009.
Metadaten
Titel
Use of Acoustic Emission Signal and X-ray Diffraction Analysis for Detection of Microstructural Changes in Cyclically Loaded AlMg Alloys
verfasst von
P. Mazal
P. Liskutin
F. Vlasic
F. Hort
J. Fiala
Copyright-Jahr
2013
Verlag
Springer Netherlands
DOI
https://doi.org/10.1007/978-94-007-0723-8_78