nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Voxel and Finite Element Modeling of the Ceramic–Polymer Composite Panel for Ballistic Impact Description

verfasst von : E. I. Shchurova

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Orbital object protection against micrometeorites and orbital garbage may be realized using flexible protective panels made of polymer matrix and ceramic grains. The best protection may be performed using grains of optimal size, specific grains volume content, and appropriate materials. In the view of this, development of parametric FE models with changeable parameters is an actual problem. The adequate description of a panel composite structure is an important modeling item. Composite micro-modeling with the description of each ceramic grain provides the most adequate results. Grains scanning and following image rasterization are used to describe a composite structure instead of abstract grains modeling. The application of voxel modeling and set algebra provides the modeling of an arbitrary composite structure. Plastic kinematic material model is used as a rather simple and adequate to minify computational complexity. Model parameters have been selected using experimental data and applied to describe penetrator impact on composite panel. The research has proved the feasibility of such modeling procedure.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Selection of Rational Technological Modes and Parameters of Underwater Waterjet Cutting

Nächstes Kapitel Common Problems and Prospects of Crankshaft (Eccentric) Machinery Usage in Sawmilling

Christiansen E (2014) Micrometeoroid and Orbital Debris (MMOD) Risk Overview. Report N: JSC-CN-31542/ NASA In-Space Inspection Technology Workshop (ISIW 2014). Houston, TX; United States 32. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20140009950.pdf

Andrenucci M, Pergola P, Ruggiero A (2011) Active removal of space debris. Expanding foam application for active debris removal, University of Pisa 132

Ridenoure R et al (2016) Testing the LightSail program: advancing solar sailing technology using a CubeSat platform. J Small Satellites 5(2):531–550

Xu M et al (2016) Static and dynamic properties of semi-crystalline polyethylene. Polymers 8(4):77–91. https://doi.org/10.3390/polym8040077CrossRef

Shah QH (2009) Impact resistance of a rectangular polycarbonate armor plate subjected to single and multiple impacts. Int. J Impact Eng 36:1128–1135. https://doi.org/10.1016/j.ijimpeng.2008.12.005CrossRef

Medvedovski E (2010) Ballistic performance of armour ceramics: Influence of design and structure. Part 2, Ceram Int 36:2117–2127. https://doi.org/10.1016/j.ceramint.2010.05.021CrossRef

Tomczyk K et al (2014) The effect of bullet yaw on the threat level; a numerical investigation. In: Conference: personal armour systems symposium (PASS 2014) Cambridge

Rahbek DB et al (2017) Effect of composite covering on ballistic fracture damage development in ceramic plates. Int J Impact Eng 99:58–68. https://doi.org/10.1016/j.ijimpeng.2016.09.010CrossRef

Jovicic J, Zavaliangos A, Ko F (2015) Numerical modeling of impact behavior of integrated gradient design composite materials. Res Gate 1–35. https://doi.org/10.13140/rg.2.1.2931.9120

10.

Ernst G et al (2010) Multiscale progressive failure analysis of textile composites. Compos Sci Technol 70:61–72. https://doi.org/10.1016/j.compscitech.2009.09.006CrossRef

11.

Jovicic J, Zavaliangos A, Ko F (2000) Modeling of the ballistic behavior of gradient design composite armors. Composites, Part A 31:773–784. doi: http://dx.doi.org/10.1016/S1359-835X(00)00028-2CrossRef

12.

Sun W, Lin F, Hu X (2001) Computer-aided design and modeling of composite unit cells. Compos Sci Technol 61:289–299CrossRef

13.

Kim HJ, Swan CC (2003) Algorithms for automated meshing and unit cell analysis of periodic composites with hierarchical tri-quadratic tetrahedral elements. Int J Numer Meth Eng 58:1683–1711. https://doi.org/10.1002/nme.828CrossRef

14.

Özel T, Karpat Y (2007) Identification of constitutive material model parameters for high-strain rate metal cutting conditions using evolutionary computational algorithms. Mater Manufact Process 22(5):659–667. https://doi.org/10.1080/10426910701323631CrossRef

15.

Sapozhnikov SB, Shchurova EI (2017) Voxel and finite element analysis models for ballistic impact on ceramic-polymer composite panels. Proc Eng 206:182–187. https://doi.org/10.1016/j.proeng.2017.10.457CrossRef

16.

Astafurov SV et al (2014) Influence of interface properties on mechanical characteristics of metal ceramic composites. Phys Mesomech 17(4):282–291. https://doi.org/10.1134/S1029959914040055CrossRef

17.

Romanova VA et al (2005) Mesomechanical analysis of the ELASTO-PLASTIC behavior of a 3D composite-structure under tension. Comput Mech 36:475–483. https://doi.org/10.1007/s00466-005-0682-5CrossRef

18.

Ignatova AV, Kudryavtsev OA, Sapoznikov SB (2015) Eksperimentalnoe issledovanie i cislennoe modelirovanie uprugih harakteristik i procnosti poristoj keramiki (Experimental investigation and numerical modeling of elastic properties and strength of porous ceramics). PNRPU Mech Bull 4:121–137. https://doi.org/10.15593/perm.mech/2015.4.08

19.

Uhrig M et al (2015) Numerical simulation of mechanical properties of nano particle modified polyamide 6 via RVE modeling. J Mater Sci Chem Eng 3:95–102. https://doi.org/10.4236/msce.2015.31014CrossRef

20.

Chernyuk AM (2015) Analiz metodov modelirovaniya strukturno-geometricheskikh form provodyashchikh poristykh sred (Analysis of methods of design of structurally-geometrical forms of conducting porous environments). Energy Saving. Power Eng. Energy Audit 1(132):46–53

21.

Nachtnebel M et al (2017) 3D reconstruction of cracks in polymers—new insight into the fracture behaviour? In: Deformation and Fracture Behaviour of Polymer Materials. Chapter in Springer Series in Materials Science July 2017, pp 109–119. https://doi.org/10.1007/978-3-319-41879-7_8CrossRef

22.

Shchurova CI (2015) A methodology to design a 3D graphic editor for micro-modeling of fiber-reinforced composite parts. Adv Eng Softw 90:76–82. https://doi.org/10.1016/j.advengsoft.2015.07.001CrossRef

23.

Shchurova EI (2016) Modeling of the ceramics structure for the finite element analysis. Proc Eng 150:179–184. https://doi.org/10.1016/j.proeng.2016.06.744CrossRef

24.

LS-DYNA User’s Guide. Release 15.0. 2013. ANSYS Inc.

25.

Harper CA (2001) Handbook of ceramics, glasses, and diamonds, McGraw-Hill, Lutherville, Maryland. https://doi.org/10.1036/0071414673

Titel: Voxel and Finite Element Modeling of the Ceramic–Polymer Composite Panel for Ballistic Impact Description
verfasst von: E. I. Shchurova
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_30

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht