nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Ways of Increasing Wear Resistance and Damping Properties of Radial Bearings with Forced Lubricant Supply

verfasst von : I. V. Kolesnikov, A. M. Mukutadze, V. V. Avilov

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper considers radial friction bearings of finite length, the fixed hub of which consists of a supporting part, a porous layer, and a liquid material. The existing methods of design calculations of such bearings are very approximate, since they do not take into account the nonstationary operating conditions of the shaft and the influence of the method of supplying the lubricant. The influence of these parameters on the stable operation of the triboconjugation under consideration is shown. In addition, as a result of the studies, the effect of multifunctional additives for lubricants in the form of nanoscale particles was established by studying the phase diagrams of systems of ceramic materials–oxides and condensed phosphates. This approach makes it possible to actively control the coefficient of friction by changing the state of surface films with boundary friction.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Control Method of Thermo-oxidative Stability Factors of Synthetic Motor Oil

Nächstes Kapitel Development of Bearing Beam and Seal System for Main Pumps

Akhverdiev KS, Zadorozhnaya NS, Mukutadze AM, Flek BM (2016) The design model of a compound cylindrical bearing operating in a stable mode, at incomplete filling of the gap with lubricant. Probl Mach Build Mach Reliab 3:64–69

Akhverdiev KS, Mukutadze MA, Mukutadze AM (2016) Radial bearing with porous barrel. In: Proceedings of academic world, international conference, 28th of March, 2016, San Francisco, USA, IRAG Research Forum: Institute of Research and Journals, pp 28–31

Mukutadze AM (2016) Coefficient of a rolling motion bearing drive. Proc Eng 150:547–558CrossRef

Zadorozhnaya EA, Mukhortov IV, Levanov IG (2011) Application of non-Newtonian models of lubricating liquids in the calculation of complex loaded friction units for piston and rotor machines. Friction Lubr Mach Mech 7:22–30

Prokopiev VN, Boyarshinova AК, Zadorozhnaya EA (2005) Dynamics of a complex loaded bearing lubricated by a non-Newtonian liquid. Probl Mach Build Mach Reliab 6:108–114

Prokopiev VN, Zadorozhnaya EA, Karavaev VG, Leanov IG (2010) Perfection of the calculation method for complex loaded friction bearings lubricated with non-Newtonian oils. Probl Mach Build Mach Reliab 1:63–67

Khavin VY (1991) Quick reference book of the chemist. Chemistry, Leningrad

Mukutadze MA (2016) Radial bearings with Porous Elements. Proc Eng 150:559–570CrossRef

Mukutadze MA, Flek BM, Zadorozhnaya NS (2013) Design model of hydrodynamic lubrication of non-uniform porous bearing of finite length operating in stable non-stationary friction mode in the presence of forced lubricant feeding. Don Engineering Bulletin, Is. 3. http://ivdon.ru/magazine/archive/n3y2013/1765

10.

Akhverdiev КS, Zadorozhnaya NS, Flek BM, Mukutadze AM (2014) The system of design models of compound cylindrical friction bearings operating in a stable non-stationary friction mode, with two versions of the lubricant supply. Bull RSTU 4:119–126

11.

Akhverdiev КS, Mukutadze AM, Zadorozhnaya NS, Flek BM (2015) Analytical prediction of coefficient of transmission of damper of elastic rolling support in a damper with a squeezed film and inhomogeneous composite porous casing, taking into account the feeding of lubricant. Bull RSTU 1:131–140

12.

Mukutadze AM, Flek BM (2016) Transfer coefficient of damper with porous sintered ring with combined lubricant supply. Bull RSTU 2(62):148–157

13.

Akhverdiev KS, Mukutadze AM (2016) Damper with porous anisotropic ring. Mech Eng Res 6(2):1–10CrossRef

14.

Akhverdiev KS, Mukutadze AM (2017) Research of drive factor of damper with double-layer porous ring with compound feed of lubricant material. Int J Appl Eng Res 1:76–85

15.

Akhverdiev KS, Mukutadze AM, Zadorozhnaya NS, Flek BM (2016) Damper with porous element for bearing supports. Friction Wear 37(4):502–509

16.

Kolesnikov VI, Savenkova MA, Solodovnikova DN et al (2013) Lubricating compositions “Puma” and “Buxol” modified with additives of polyphosphates. Friction Wear Mach Mech 2:3–7

17.

Kolesnikov VI, Savenkova MA, Avilov VV et al (2015) Properties of “Puma” and “Buxol” lubricants modified with inorganic additives of double polyphosphates. Friction Wear 36(3):273–281

18.

Dolgopolov KN, Lyubimov DN, Kolesnikov IV (2016) Investigation of the microstructure of mineral films obtained by frictional interaction. Glass Phys Chem 42(3):302–306CrossRef

19.

Kolesnikov IV (2015) Physicochemical processes of skew film formation on the interface of metal and polymer tribosystems. In: Films and coatings—2015: 12th international conference, Editorship of Polytechnic University, SPb, pp 20–22, 19–22 May 2015

20.

Kolesnikov IV (2017) System analysis and synthesis of processes occurring in metal and polymeric friction knots of frictional and antifriction purposes. VINITI RAN, Moscow, p 384

21.

Kolesnikov VI, Kravchenko VN, Kolesnikov IV (2014) Kinetics of frictional transfer in a metal and polymer tribosystem. Friction Wear 35(6):735–738

Titel: Ways of Increasing Wear Resistance and Damping Properties of Radial Bearings with Forced Lubricant Supply
verfasst von: I. V. Kolesnikov
A. M. Mukutadze
V. V. Avilov
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_110

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht