nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

κIV Precipitation in Nickel-Aluminum Bronze During Rapid Cooling in Selective Laser Melting

verfasst von : Farzad Khodabakhshi, Gerhard Wilde, Mohsen Mohammadi

Erschienen in: Proceedings of the 62nd Conference of Metallurgists, COM 2023

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The most popular marine industry alloy of nickel-aluminum bronze (Cu-9Al-4Ni-4Fe-1Mn) was considered for additive manufacturing (AM) via the selective laser melting (SLM) procedure. Non-equilibrium precipitation of the κ-phases upon rapid cooling with the SLM technique was studied using advanced characterization techniques by scanning transmission electron microscopy (STEM) and atom probe tomography (APT). These structural investigations revealed the occurrence of martensitic phase transformation with the super-saturation of elements through the lattice structure upon rapid solidification. Also, the APT analysis interestingly displayed a high fraction of nano-scale Fe-rich clusters inside the martensitic laths in the form of κ_IV precipitates. Based on the evident microstructural features, the results of the present work establishes the occurrence of the κ_IV as a non-equilibrium phase with a high probability of formation during rapid cooling in SLM processing in addition to the martensitic phase transformation.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Effect of Ce Addition in Hypereutectic Al-Si Alloys During Rapid Solidification

Nächstes Kapitel Application of High-Voltage Electric Pulse Fragmentation for Liberating Lithium Spodumene from Pegmatite Hard Rocks

Orzolek SM, Semple JK, Fisher CR (2022) Influence of processing on the microstructure of nickel aluminum bronze (NAB). Addit Manuf 56:102859. https://doi.org/10.1016/j.addma.2022.102859CrossRef

Hasan F, Jahanafrooz A, Lorimer GW, Ridley N (1982) The morphology, crystallography, and chemistry of phases in as-cast nickel-aluminum bronze. Metall Trans A 13(8):1337–1345. https://doi.org/10.1007/BF02642870CrossRef

Culpan EA, Rose G (1978) Microstructural characterization of cast nickel aluminium bronze. J Mater Sci 13(8):1647–1657. https://doi.org/10.1007/BF00548728CrossRef

Shen C et al (2018) The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process. Addit Manuf 23:411–421. https://doi.org/10.1016/j.addma.2018.08.008CrossRef

Dharmendra C, Amirkhiz BS, Lloyd A, Ram GDJ, Mohammadi M (2020) Wire-arc additive manufactured nickel aluminum bronze with enhanced mechanical properties using heat treatments cycles. Addit Manuf 36:101510. https://doi.org/10.1016/j.addma.2020.101510CrossRef

Murray T, Thomas S, Wu Y, Neil W, Hutchinson C (2020) Selective laser melting of nickel aluminium bronze. Addit Manuf 33:101122. https://doi.org/10.1016/j.addma.2020.101122CrossRef

Barr C, Pateras A, Molotnikov A, Clarke D, Brandt M (2022) Effect of composition on the tensile and corrosion performance of nickel aluminium bronze produced via laser powder bed fusion. Addit Manuf 54:102771. https://doi.org/10.1016/j.addma.2022.102771CrossRef

Dharmendra C, Rice KP, Amirkhiz BS, Mohammadi M (2021) Atom probe tomography study of κ-phases in additively manufactured nickel aluminum bronze in as-built and heat-treated conditions. Mater Des 202:109541. https://doi.org/10.1016/j.matdes.2021.109541CrossRef

Dharmendra C, Hadadzadeh A, Amirkhiz BS, Janaki Ram GD, Mohammadi M (2019) Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing. Addit Manuf 30:100872. https://doi.org/10.1016/j.addma.2019.100872CrossRef

Titel: κIV Precipitation in Nickel-Aluminum Bronze During Rapid Cooling in Selective Laser Melting
verfasst von: Farzad Khodabakhshi
Gerhard Wilde
Mohsen Mohammadi
Verlag: Springer Nature Switzerland
Buch: Proceedings of the 62nd Conference of Metallurgists, COM 2023
Print ISBN: 978-3-031-38140-9

Electronic ISBN: 978-3-031-38141-6

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-38141-6_70

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht