nach oben

Journal of Intelligent Manufacturing

Erschienen in:

14.06.2016

A comprehensive approach to parameters optimization of energy-aware CNC milling

verfasst von: Congbo Li, Lingling Li, Ying Tang, Yantao Zhu, Li Li

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 1/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Cutting parameters are important components in the process of computer numerical control (CNC) machining, and reasonable choice of cutting parameters can significantly affect the energy efficiency. This paper presents a multi-objective parameter optimization method for energy efficiency in CNC milling process. Firstly, the energy consumption composition characteristics and temporal characteristics in CNC milling are analyzed, respectively. The energy model of CNC milling is then established, of which the correlation coefficient is obtained through nonlinear regression fitting. Then a multi-objective optimization model is proposed to take the highest energy efficiency and the minimum production time as the optimization objectives, which is solved based on Tabu search algorithm. Finally, a case study is conducted to validate the proposed multi-objective optimization model and the optimal parameter solutions of maximum energy efficiency and minimum production time is obtained. Moreover, the parametric influence on specific energy consumption and production time are explicitly analyzed. The experiment results show that cutting depth and width are the most influential parameters for specific energy consumption, and spindle speed ranks the first for the production time.

Vorheriger Artikel A new tool wear monitoring method based on multi-scale PCA

Nächster Artikel Porosity exploration of SMA by Taguchi, regression analysis and genetic programming

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Balogun, V. A., & Mativenga, P. T. (2013). Modelling of direct energy requirements in mechanical machining processes. Journal of Cleaner Production, 41(2), 179–186.CrossRef

Bhushan, R. K. (2013). Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. Journal of Cleaner Production, 39(1), 242–254.CrossRef

Calvanese, M. L., Albertelli, P., & Matta A., et al. (2013). Analysis of energy consumption in CNC machining centers and determination of optimal cutting conditions. In Proceedings of the 20th CIRP international conference on life cycle engineering (pp. 17-19). Singapore.

Campatelli, G., Lorenzini, L., & Scippa, A. (2014). Optimization of process parameters using a response surface method for minimizing power consumption in the milling of carbon steel. Journal of Cleaner Production, 66(2), 309–316.CrossRef

Camposeco-Negrete, C. (2013). Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA. Journal of Cleaner Production, 53(16), 195–203.CrossRef

Carcangiu, S., Fanni, A., & Montisci, A. (2008). Multiobjective Tabu search algorithms for optimal design of electromagnetic devices. IEEE Transactions on Magnetics, 44(6), 970–973.CrossRef

Chelouah, R., & Siarry, P. (2000). Tabu search applied to global optimization. European Journal of Operational Research, 123(2), 256–270.CrossRef

Energy Consumption Survey (MECS) (2013) Total consumption of electricity by manufacturing industry and region. Technical report, US Energy Information Administration.

Gutowski, T., Dahmus, J., & Thiriez, A. (2006). Electrical energy requirements for manufacturing processes. In Proceedings of 13th CIRP international conference on life cycle engineering. Belgium: Leuven, May 31– June 2.

Hanafi, I., Khamlichi, A., Cabrera, F. M., et al. (2012). Optimization of cutting conditions for sustainable machining of PEEK-CF30 using tin tools. Journal of Cleaner Production, 33(8), 1–9.CrossRef

Hedberg, E. C., & Ayers, S. (2015). The power of a paired t test with a covariate. Social Science Research, 50, 277–291.CrossRef

Hu, S. H., Liu, F., He, Y., et al. (2010). Characteristics of additional load losses of spindle system of machine tools. Journal of Advanced Mechanical Design, Systems and Manufacturing, 4(7), 1221–1233.CrossRef

Kant, G., & Sangwan, K. S. (2014). Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining. Journal of Cleaner Production, 83, 151–164.CrossRef

Kara, S., & Li, W. (2011). Unit process energy consumption models for material removal processes. CIRP Annals Manufacturing Technology, 60(1), 37–40.CrossRef

Kong, D., Choi, S., Yasui, Y., et al. (2011). Software-based tool path evaluation for environmental sustainability. Journal of Manufacturing Systems, 30(4), 241–247.CrossRef

Kuram, E., Ozcelik, B., Bayramoglu, M., et al. (2013). Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments. Journal of Cleaner Production, 42(3), 159–166.CrossRef

Li, L., Liu, F., Chen, B., & Li, C. B. (2015). Multi-objective optimization of cutting parameters in sculptured parts machining based on neural network. Journal of Intelligent Manufacturing, 26(5), 891–898.CrossRef

Li, C. B., Tang, Y., Cui, L. G., et al. (2013). A quantitative approach to analyze carbon emissions of CNC-based machining systems. Journal of Intelligent Manufacturing, 26(5), 1–12.

Liu, F., Xu, Z. J., & Dan, B. (1995). Energy performance of mechanical processing system and application. Beijing: China Machine Press.

Li, W., Zein, A., Kara, S., & Herrmann, C. (2011). An investigation into fixed energy consumption of machine tools. In J. Hesselbach & C. Herrmann (Eds.), Glocalized solutions for sustainability in manufacturing (pp. 268–273). Berlin: Springer.CrossRef

Mori, M., Fujishima, M., Inamasu, Y., et al. (2011). A study on energy efficiency improvement for machine tools. CIRP Annals Manufacturing Technology, 60(1), 145–148.CrossRef

NBSC. (2010). China statistical yearbook. Beijing, China Statistics Press.

Rajemi, M. F., Mativenga, P. T., & Aramcharoen, A. (2010). Sustainable machining: Selection of optimum turning conditions based on minimum energy considerations. Journal of Cleaner Production, 18, 1059–1065.CrossRef

Salonitis, K., & Ball, P. (2013). Energy efficient manufacturing from machine tools to manufacturing systems. Procedia Cirp, 7(12), 634–639.CrossRef

Simoneau, A., & Meehan, J. (2013). The impact of machining parameters on peak power and energy consumption in CNC end milling. Energy and Power, 3(5), 85–90.

Valera, H. Y., & Bhavsar, S. N. (2014). Experimental investigation of surface roughness and power consumption in turning operation of EN 31 alloy steel. Procedia Technology, 14, 528–534.CrossRef

Velchev, S., Kolev, I., Ivanov, K., et al. (2014). Empirical models for specific energy consumption and optimization of cutting parameters for minimizing energy consumption during turning. Journal of Cleaner Production, 80, 139–149.CrossRef

Wang, Q., Liu, F., & Wang, X. (2013). Multi-objective optimization of machining parameters considering energy consumption. International Journal of Advanced Manufacturing Technology, 71(5–8), 1133–1142.

Yi, Q., Tang, Y., Li, C. B., & Li, P. Y. (2013). Optimization of CNC machine processing parameters for low carbon manufacturing. Proceedings of IEEE 9th conference on automation science and engineering (pp. 498–503). Wisconsin, USA: Madison.

Yoon, H. S., Lee, J. Y., Kim, M. S., et al. (2014). Empirical power-consumption model for material removal in three-axis milling. Journal of Cleaner Production, 78, 54–62.CrossRef

Yoon, H. S., Moon, J. S., Pham, M. Q., Lee, G. B., & Ahn, S. H. (2013). Control of machining parameters for energy and cost savings in micro-scale drilling of PCBs. Journal of Cleaner Production, 54, 41–48.CrossRef

Titel: A comprehensive approach to parameters optimization of energy-aware CNC milling
verfasst von: Congbo Li
Lingling Li
Ying Tang
Yantao Zhu
Li Li
Publikationsdatum: 14.06.2016
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 1/2019
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-016-1233-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2019

The Contribution concept for the control of a manufacturing multi-criteria performance improvement

A feasible incentive contract between a manufacturer and his fairness-sensitive retailer engaged in strategic marketing efforts

Porosity exploration of SMA by Taguchi, regression analysis and genetic programming

Parallel chaotic local search enhanced harmony search algorithm for engineering design optimization

Online inspection system based on machine learning techniques: real case study of fabric textures classification for the automotive industry

Inventory management for a remanufacture-to-order production with multi-components (parts)

Premium Partner

Marktübersichten