Skip to main content

2023 | OriginalPaper | Buchkapitel

A Dynamic Coupled Mass and Thermal Model for the Top Chamber of the Aluminium Smelting Cells

verfasst von : Luning Ma, Choon-Jie Wong, Jie Bao, Maria Skyllas-Kazacos, Barry J. Welch, Nadia Ahli, Mohamed Mahmoud, Konstantin Nikandrov, Amal Aljasmi

Erschienen in: Light Metals 2023

Verlag: Springer Nature Switzerland

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The cell top chamber is an important region for exchanging material and energy with the bath and the surrounding environment. A considerable heat loss of the aluminium smelting cells is lost through this space. The heat transfer behaviour in the cell top is complex—ambient air and gases generated in the bath enter the cell top, undergo chemical reactions, and are finally collected by the exhaust duct. This paper presents a dynamic coupled mass and thermal model for the top chamber of the aluminium smelting cell. Based on the model, the dynamics of cell top temperature under different operations are studied. This model can be used to investigate the influence of cell operations on the cell top heat balance, especially during power modulation.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Tandon, S. C., & Prasad, R. N. (2005). Energy Saving in Hindalco’s Aluminium Smelter. Light Metals, 303–309. Tandon, S. C., & Prasad, R. N. (2005). Energy Saving in Hindalco’s Aluminium Smelter. Light Metals, 303–309.
2.
Zurück zum Zitat Abbas, H. (2010). Mechanism of Top Heat Loss from Aluminium Smelting Cells. Doctoral dissertation, The University of Auckland. Abbas, H. (2010). Mechanism of Top Heat Loss from Aluminium Smelting Cells. Doctoral dissertation, The University of Auckland.
3.
Zurück zum Zitat Robinson, T. P. (2005). Evaluating and Funding New Technologies to Support the U.S. Aluminium Industry, Light Metals. Robinson, T. P. (2005). Evaluating and Funding New Technologies to Support the U.S. Aluminium Industry, Light Metals.
4.
Zurück zum Zitat Tsukahara, H., Ono, N., & Fujita, K. (1982). Establishment of Effective Operation of Prebaked Anode Pots. Light Metals, 82, 471. Tsukahara, H., Ono, N., & Fujita, K. (1982). Establishment of Effective Operation of Prebaked Anode Pots. Light Metals, 82, 471.
5.
Zurück zum Zitat Arai, K., & Yamazaki, K. (1975). Heat Balance and Thermal Losses in Advanced Prebaked Anode Cells. Light Metals, 1, 193. Arai, K., & Yamazaki, K. (1975). Heat Balance and Thermal Losses in Advanced Prebaked Anode Cells. Light Metals, 1, 193.
6.
Zurück zum Zitat Peacey, J. G., & Medlin, G. W. (1979). Cell Sidewall Studies at Noranda Aluminium. Metallurgical Soc. of AIME. Peacey, J. G., & Medlin, G. W. (1979). Cell Sidewall Studies at Noranda Aluminium. Metallurgical Soc. of AIME.
7.
Zurück zum Zitat Gadd, M. D., Welch, B. J., & Ackland, A. D. (2000). The Effect of Process Operations on Smelter Cell Top Heat Losses. Light Metals, 231. Gadd, M. D., Welch, B. J., & Ackland, A. D. (2000). The Effect of Process Operations on Smelter Cell Top Heat Losses. Light Metals, 231.
8.
Zurück zum Zitat Dupuis, M., & Haupin, W. (2003). Performing Fast Trend Analysis on Cell Key Design Parameters. In Light Metals Warrendale Proceedings. (pp. 255–262). TMS. Dupuis, M., & Haupin, W. (2003). Performing Fast Trend Analysis on Cell Key Design Parameters. In Light Metals Warrendale Proceedings. (pp. 255–262). TMS.
9.
Zurück zum Zitat Taylor, M. P., Johnson, G. L., Andrews, E. W., & Welch, B. J. (2004). The Impact of Anode Cover Control and Anode Assembly Design on Reduction Cell Performance. In Light Metals Warrendale Proceedings. (pp. 199–206). TMS. Taylor, M. P., Johnson, G. L., Andrews, E. W., & Welch, B. J. (2004). The Impact of Anode Cover Control and Anode Assembly Design on Reduction Cell Performance. In Light Metals Warrendale Proceedings. (pp. 199–206). TMS.
10.
Zurück zum Zitat Gadd, M. D. (2003). Aluminium Smelter Cell Energy Flow Monitoring. Doctoral dissertation, The University of Auckland, Chemical and Materials Engineering. Gadd, M. D. (2003). Aluminium Smelter Cell Energy Flow Monitoring. Doctoral dissertation, The University of Auckland, Chemical and Materials Engineering.
11.
Zurück zum Zitat Wong CJ; Yao Y; Bao J; Skyllas-Kazacos M; Welch BJ; Jassim A; Mahmoud M; Arkhipov A. (2021). Modelling of Coupled Mass and Thermal Balances in Hall-Heroult Cells during Anode Change, Journal of the Electrochemical Society, vol. 168. Wong CJ; Yao Y; Bao J; Skyllas-Kazacos M; Welch BJ; Jassim A; Mahmoud M; Arkhipov A. (2021). Modelling of Coupled Mass and Thermal Balances in Hall-Heroult Cells during Anode Change, Journal of the Electrochemical Society, vol. 168.
12.
Zurück zum Zitat Wong CJ; Yao Y; Bao J; Skyllas-Kazacos M; Welch BJ; Jassim A; Mahmoud M, (2021). Discretized thermal model of Hall-Héroult cells for monitoring and control, IFAC-PapersOnLine, vol. 54, pp. 67–72.CrossRef Wong CJ; Yao Y; Bao J; Skyllas-Kazacos M; Welch BJ; Jassim A; Mahmoud M, (2021). Discretized thermal model of Hall-Héroult cells for monitoring and control, IFAC-PapersOnLine, vol. 54, pp. 67–72.CrossRef
13.
Zurück zum Zitat Eisma, D., & Patel, P. (2016). Challenges in Power Modulation. In Essential Readings in Light Metals (pp. 683–688). Springer, Cham. Eisma, D., & Patel, P. (2016). Challenges in Power Modulation. In Essential Readings in Light Metals (pp. 683–688). Springer, Cham.
14.
Zurück zum Zitat Depree, N., Düssel, R., Patel, P., & Reek, T. (2016). The ‘Virtual Battery’—Operating an Aluminium Smelter with Flexible Energy Input. In Light Metals 2016 (pp. 571–576). Springer, Cham. Depree, N., Düssel, R., Patel, P., & Reek, T. (2016). The ‘Virtual Battery’—Operating an Aluminium Smelter with Flexible Energy Input. In Light Metals 2016 (pp. 571–576). Springer, Cham.
15.
Zurück zum Zitat Taylor, M. P. (2007, November). Anode Cover Material–science, Practice and Future Needs. In Proceedings of 9th Australasian Aluminium Smelting Technology Conference (pp. 4–9). Taylor, M. P. (2007, November). Anode Cover Material–science, Practice and Future Needs. In Proceedings of 9th Australasian Aluminium Smelting Technology Conference (pp. 4–9).
16.
Zurück zum Zitat Dupuis, M., & Haupin, W. (2003). Calculating Temperatures Under Hood of a Prebake Anode Cell. In Light Metals (Metaux Legers) 2003: International Symposium on Light Metals as held at the 42nd Annual Conference of Metallurgists of CIM(COM 2003) (Vol. 2003). Dupuis, M., & Haupin, W. (2003). Calculating Temperatures Under Hood of a Prebake Anode Cell. In Light Metals (Metaux Legers) 2003: International Symposium on Light Metals as held at the 42nd Annual Conference of Metallurgists of CIM(COM 2003) (Vol. 2003).
17.
Zurück zum Zitat Gusberti, V. (2014). Modelling the Mass and Energy Balance of Aluminium Reduction Cells. Doctoral dissertation, The University of New South Wales. Gusberti, V. (2014). Modelling the Mass and Energy Balance of Aluminium Reduction Cells. Doctoral dissertation, The University of New South Wales.
18.
Zurück zum Zitat Lutgens, F. K., Tarbuck, E. J., & Tusa, D. (1995). The Atmosphere. Englewood Cliffs, NJ, USA: Prentice-Hall. Lutgens, F. K., Tarbuck, E. J., & Tusa, D. (1995). The Atmosphere. Englewood Cliffs, NJ, USA: Prentice-Hall.
20.
Zurück zum Zitat Simon, D. (2006). Optimal state estimation: Kalman, H infinity, and nonlinear approaches. John Wiley & Sons.CrossRef Simon, D. (2006). Optimal state estimation: Kalman, H infinity, and nonlinear approaches. John Wiley & Sons.CrossRef
Metadaten
Titel
A Dynamic Coupled Mass and Thermal Model for the Top Chamber of the Aluminium Smelting Cells
verfasst von
Luning Ma
Choon-Jie Wong
Jie Bao
Maria Skyllas-Kazacos
Barry J. Welch
Nadia Ahli
Mohamed Mahmoud
Konstantin Nikandrov
Amal Aljasmi
Copyright-Jahr
2023
DOI
https://doi.org/10.1007/978-3-031-22532-1_9

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.