nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

29.10.2021 | ORIGINAL ARTICLE

A hobbing method for spur face gears with bidirectional modification

verfasst von: Yanzhong Wang, Guoying Su, Douwei Liu, Yizhan Huang, Mingke Xie, Wei Zhang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The spur face gear is a novel drive that is widely applied in national defense. To improve the production efficiency and meshing properties of spur face gears, a hobbing method for spur face gears with a bidirectional modification is proposed. To obtain the tooth surface of the gear by hobbing, the basic worm of the spherical hob and the tooth surface equation by hobbing were established. To obtain a convex surface, modification along the contact trace and contact line was proposed. Then, a hobbing method for face gears with bidirectional modification was studied based on current machine tools. Therefore, a prototype was produced, which illustrates the feasibility of manufacturing the design. Detection methods revealed that the maximum error of an unmodified tooth surface is −11.2 μm, and the maximum deviation errors along the contact trace and contact line are −2.7 μm and −2.1 μm, respectively. The results show that hobbing is an effective method for bidirectional modification of gear teeth.

Vorheriger Artikel Effect of the interpass temperature on simulated heat-affected zone of gas metal arc welded API 5L X70 pipe joint

Nächster Artikel Effect of Co and Fe contents on the microstructure and corrosion behaviour of heat-treated Ni-Fe-Co superalloys in 3.5 wt% NaCl aqueous solution

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Litvin FL, Zhang Y, Wang JC, Bossler RB, Chen YJD (1992) Design and geometry of face-gear drives. J Mech Des 114(4):642–647. https://doi.org/10.1115/1.2917055CrossRef

Wang YZ, Su GY, Chu XM, Huang YZ, Shiyuan E, Zhang W, Liu Y (2020) A finishing method for the continuous generation of spur face gears with shaving cutters. Int J Mech Sci 190:106020. https://doi.org/10.1016/j.ijmecsci.2020.106020CrossRef

Litvin FL, Wang JC, Bossler RB, Chen YJD, Lewicki DG (1992) Application of face gear drives in helicopter transmission. ASME 1992 Design Technical Conferences, pp 267-274. https://doi.org/10.1115/DETC1992-0033

Litvin FL, Wang JC, Bossler RB, Chen YJD, Heath GF, Lewicki DG (1994) Application of face-gear drives in helicopter transmissions. J Mech Des 116(3):672–676. https://doi.org/10.1115/1.2919434CrossRef

Chen YJD, Bossler RB (1995) Design analysis and testing methods for a split-torque face-gear transmission. Joint Propulsion Conference & Exhibit:1-7. https://doi.org/10.2514/6.1995-3051

Lewicki DG, Heath GF, Filler RR, Slaughter SC, Fetty J (2007)RDS–21Face-gear surface durability tests. NASA Technical Reports Server:1018-1027. https://ntrs.nasa.gov/citations/20070034728. Accessed 21 Mar 2021

Heath GF, Filler RR, Tan J (2002) Development of face gear technology for industrial and aerospace power transmission. NASA/CR:2002-211320. https://ntrs.nasa.gov/citations/20020062003. Accessed 18 Mar 2021

Miller EW (1942) Hob for generating crown gears. USA Patent:2,304,586. https://www.freepatentsonline.com/2304586.html. Accessed 28 Mar 2021

Wang YZ, Wu CH, Ge XY, Zhang L (2009) Design method of basic worm of face gear hob. J Beihang Univ 35(2):166–169

10.

Li ZMQ, Zhu RP (2009) Research on base worm of face gear hobbing cutter. J Mech Sci Technol 28(1):98–101

11.

Gao JZ, Zhu RP, Li ZMQ (2011) Research on singular points of tooth profile of base worm of face gear hobbing cutter. J Aerosp Power 26(10):2394–2400

12.

Wang YZ, Hou LW, Lv QJ, Zhao XF, Wu CH (2015) Complex surface machining technology of face gear based on bus control. J Jilin Univ 45(6):1836–1843

13.

Xiang PZR, Xu HG (1997) Hobbing internal gear with spherical hob. Manuf Tech Mach Tools 2:13–16

14.

Cui YQ, Hu ZQ, Wang ZC, Zhou P, Ren DS (1994) Manufacturing and theoretical error of spherical hob. J Mech Trans 2:55–58

15.

Cui YQ, Hu ZQ (1995) Tooth profile of spherical hob. J Anshan Univ 2:100–103

16.

Wang YJ (1990) Research on helical surface of spherical hob. Tool Tech 1:20–26

17.

Zhao N, Guo H, Fang ZD, Shen YP (2009) Theoretical error of hobbing face gear with spherical hob. J Aerosp Power 03:207–212

18.

Peng XL, Hu XW, Fang ZD (2014) Active design of face gear drive for modifying ease off topology flank. J Aerosp Power 05:1216–1222

19.

Ren HL (2014) Meshing performance analysis of face-gear drive based on pinion double crowned modification. Hunan Univ Tech, Zhuzhou

20.

Tang JY, Yin F, Zhang Y (2012) Research on the machining principle and error analysis of Gleason CONIFACE grinding method for face gear. J Mech Trans 36(12):8–11 +15

21.

Yu HB (1989) Circular arc projection and application. J Jilin Inst Chem Technol 6(4):73–77

22.

Hou LW, Wu CH, Wang YZ, Wang D (2013) A numerical control gear hobbing device for face gear. CN Patent: CN102248228A. http://www.google.com/patents/CN101961801A?cl=zh. Accessed 01 Apr 2021

23.

Wang YZ, Hou LW, Lan Z, Zhu CL (2017) Precision milling method for face-gear by disk cutter. Int J Adv Manuf Technol 89(5-8):1545–1558. https://doi.org/10.1007/s00170-016-9189-9CrossRef

24.

Wang YZ, Hou LW, Lan Z, Zhang GL (2016) Precision grinding technology for complex surface of aero face-gear. Int J Adv Manuf Technol 86(5-8):1263–1272. https://doi.org/10.1007/s00170-015-8241-5CrossRef

Titel: A hobbing method for spur face gears with bidirectional modification
verfasst von: Yanzhong Wang
Guoying Su
Douwei Liu
Yizhan Huang
Mingke Xie
Wei Zhang
Publikationsdatum: 29.10.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07809-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Oxidation and wear behavior of high-speed steel and semi-high-speed steel used in hot strip mill

Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components

A methodology for industrial robot calibration based on measurement sub-regions

Comparison of continuous and pulsed wave lasers in keyhole welding of stainless-steel to aluminium

Experimental and numerical study of cold helical rolling of small-diameter steel balls

Prediction and compensation strategy of contour error in multi-axis motion system

Premium Partner

Marktübersichten