nach oben

Microsystem Technologies

Erschienen in:

23.06.2022 | Review Paper

A review on piezoelectric energy harvesting

verfasst von: E. L. Pradeesh, S. Udhayakumar, M. G. Vasundhara, G. K. Kalavathi

Erschienen in: Microsystem Technologies | Ausgabe 8/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The field of wireless sensors and portable electronics devices gained more attraction and growth over the years. Almost all the devices are powered using chemical batteries. Several energy sources are available in the environment in different parameters, which could be able to convert into an electrical parameter to power the portable devices and wireless sensors. This article reviews the harvesting of vibrational energy and converting it into electrical energy using piezoelectric materials. The sources of energy and conversion mechanism used to convert one type of energy into electrical energy were discussed. The different types of piezoelectric materials, various geometries of the substrate, resonant tuning methods of the harvester, placement of piezoelectric materials, and proof mass on the substrate were also reviewed.

Vorheriger Artikel Design of a piezoelectric–electromagnetic hybrid vibration energy harvester operating under ultra-low frequency excitation

Nächster Artikel Design analysis and simulation of a digital RF MEMS varactor with high capacitive ratio

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Aboulfotoh N, Twiefel J, Aboulfotoh N, Twiefel J (2018) A study on important issues for estimating the effectiveness of the proposed piezoelectric energy harvesters under volume constraints. Appl Sci 8:1075. https://doi.org/10.3390/app8071075CrossRef

Alameh AH, Gratuze M, Elsayed MY, Nabki F (2018) Effects of proof mass geometry on piezoelectric vibration energy harvesters. Sensors (basel, Switzerland). https://doi.org/10.3390/s18051584CrossRef

Amirtharajah and Chandrakasan (1997) Self-powered low power signal processing. In: Symposium on VLSI circuits. IEEE, p 25–26

Anton SR, Sodano HA (2007) A review of power harvesting using piezoelectric materials (2003–2006). Smart Mater Struct 16:R1–R21. https://doi.org/10.1088/0964-1726/16/3/R01CrossRef

Aridogan U, Basdogan I, Erturk A (2014) Multiple patch–based broadband piezoelectric energy harvesting on plate-based structures. J Intell Mater Syst Struct 25:1664–1680. https://doi.org/10.1177/1045389X14544152CrossRef

Athavale AA (2015) An analytical model for piezoelectric unimorph cantilever subjected to an impulse load. Master thesis, Rutgers University

Baker J, Roundy S, Wright P (2005) Alternative geometries for increasing power density in vibration energy scavenging for wireless sensor networks. In: 3rd international energy conversion engineering conference. American Institute of Aeronautics and Astronautics, Reston, Virigina, p 1–12

Bardaweel H, Al Hattamleh O, Richards R et al (2006) A comparison of piezoelectric materials for MEMS power generation. In: Proceedings of the 6th international workshop on micro and nanotechnology for power generation and energy conversion applications. Berkeley, CA, USA

Botta F, Dini D, Schwingshackl C et al (2013) Optimal placement of piezoelectric plates to control multimode vibrations of a beam. Adv Acoust Vib 2013:1–8. https://doi.org/10.1155/2013/905160CrossRef

Caruso G, Galeani S, Menini L (2003) Active vibration control of an elastic plate using multiple piezoelectric sensors and actuators. Simul Model Pract Theory 11:403–419. https://doi.org/10.1016/S1569-190X(03)00056-XCrossRef

Chalasani S, Conrad JM (2008) A survey of energy harvesting sources for embedded systems. In: IEEE SoutheastCon 2008. IEEE, p 442–447

Challa VR, Prasad MG, Shi Y, Fisher FT (2008) A vibration energy harvesting device with bidirectional resonance frequency tunability. Smart Mater Struct 17:015035. https://doi.org/10.1088/0964-1726/17/01/015035CrossRef

Chandrakasan A, Amirtharajah R, Goodman J, Rabiner W (1998) Trends in low power digital signal processing. In: ISCAS’98. Proceedings of the 1998 IEEE international symposium on circuits and systems (Cat. No.98CH36187). IEEE, p 604–607

Chilibon I, Marat-Mendes JN (2012) Ferroelectric ceramics by sol–gel methods and applications: a review. J Sol-Gel Sci Technol 64:571–611. https://doi.org/10.1007/s10971-012-2891-7CrossRef

Cho J, Anderson M, Richards R et al (2005a) Optimization of electromechanical coupling for a thin-film PZT membrane: I. Modeling. J Micromech Microeng 15:1797–1803. https://doi.org/10.1088/0960-1317/15/10/002CrossRef

Cho J, Anderson M, Richards R et al (2005b) Optimization of electromechanical coupling for a thin-film PZT membrane: II. Experiment. J Micromech Microeng 15:1804–1809. https://doi.org/10.1088/0960-1317/15/10/003CrossRef

Chopra I (2002) Review of state of art of smart structures and integrated systems. AIAA J 40:2145–2187. https://doi.org/10.2514/2.1561CrossRef

Churchill DL, Hamel MJ, Townsend CP, Arms SW (2003) Strain energy harvesting for wireless sensor networks. In: Varadan VK, Kish LB (eds). International Society for Optics and Photonics, Bellingham, p 319

Cook-Chennault KA, Thambi N, Sastry AM (2008) Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems. Smart Mater Struct 17:043001. https://doi.org/10.1088/0964-1726/17/4/043001CrossRef

Cornwell PJ, Goethal J, Kowko J, Damianakis M (2005) Enhancing power harvesting using a tuned auxiliary structure. J Intell Mater Syst Struct 16:825–834. https://doi.org/10.1177/1045389X05055279CrossRef

Damya A, Abbaspour Sani E, Rezazadeh G (2018a) An innovative piezoelectric energy harvester using clamped–clamped beam with proof mass for WSN applications. Microsyst Technol. https://doi.org/10.1007/s00542-018-3890-6CrossRef

Damya A, Abbaspour Sani E, Rezazadeh G (2018b) Designing and analyzing of a piezoelectric energy harvester with tunable system natural frequency for WSN and biosensing applications. Microsyst Technol. https://doi.org/10.1007/s00542-018-4150-5CrossRef

Dineva P, Gross D, Müller R, Rangelov T (2014) Dynamic fracture of piezoelectric materials. Springer, ChamCrossRef

Elvin NG, Elvin AA, Spector M (2001) A self-powered mechanical strain energy sensor. Smart Mater Struct 10:293–299. https://doi.org/10.1088/0964-1726/10/2/314CrossRef

Fahroo F, Wang Y (1997) Optimal location of piezoceramic actuators for vibration suppression of a flexible structure. In: Proceedings of the 36th IEEE conference on decision and control. IEEE, p 1966–1971

Fraden J (2010) Handbook of modern sensors: physics, designs, and applications. Springer, New YorkCrossRef

Fu YQ, Luo JK, Nguyen NT et al (2017) Advances in piezoelectric thin films for acoustic biosensors, acoustofluidics and lab-on-chip applications. Prog Mater Sci 89:31–91. https://doi.org/10.1016/J.PMATSCI.2017.04.006CrossRef

Global Energy Harvesting Market, Forecast to 2030 (2019) https://store.frost.com/global-energy-harvesting-market-forecast-to-2030.html. Accessed 15 May 2019

Goldschmidtboeing F, Woias P (2008) Characterization of different beam shapes for piezoelectric energy harvesting. J Micromech Microeng 18:104013. https://doi.org/10.1088/0960-1317/18/10/104013CrossRef

González JL, Rubio A, Moll F (2002) Human Powered Piezoelectric Batteries to Supply Power to Wearable Electronic Devices. Int J Soc Mater Eng Resour 10:34–40. https://doi.org/10.5188/ijsmer.10.34CrossRef

Gupta V, Sharma M, Thakur N (2010) Optimization criteria for optimal placement of piezoelectric sensors and actuators on a smart structure: a technical review. J Intell Mater Syst Struct 21:1227–1243. https://doi.org/10.1177/1045389X10381659CrossRef

Hailu B, Hayward G, Gachagan A et al (2000) Comparison of different piezoelectric materials for the design of embedded transducers for structural health monitoring applications. In: 2000 IEEE ultrasonics symposium. proceedings. An international symposium (Cat. No.00CH37121). IEEE, p 1009–1012

Häsler E, Stein L, Harbauer G (1984) Implantable physiological power supply with PVDF film. Ferroelectrics 60:277–282. https://doi.org/10.1080/00150198408017528CrossRef

Hehn T, Manoli Y (2015) CMOS circuits for piezoelectric energy harvesters. Springer, DordrechtCrossRef

Hendrowati W, Guntur HL, Sutantra IN (2012) Design, modeling and analysis of implementing a multilayer piezoelectric vibration energy harvesting mechanism in the vehicle suspension. Engineering 04:728–738. https://doi.org/10.4236/eng.2012.411094CrossRef

Hosseini R, Hamedi M (2015) Improvements in energy harvesting capabilities by using different shapes of piezoelectric bimorphs. J Micromech Microeng 25:125008. https://doi.org/10.1088/0960-1317/25/12/125008CrossRef

Hosseini R, Hamedi M (2016) Resonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester. Shahid Rajaee Teach Train Univ (SRTTU) 6:65–73. https://doi.org/10.22061/JCARME.2016.521CrossRef

Hosseini R, Nouri M (2016) Shape design optimization of unimorph piezoelectric cantilever energy harvester. J Comput Appl Mech 47:247–259. https://doi.org/10.22059/JCAMECH.2017.224975.126CrossRef

Hosseini R, Hamedi M, Ebrahimi Mamaghani A et al (2017a) Parameter identification of partially covered piezoelectric cantilever power scavenger based on the coupled distributed parameter solution. Int J Smart Nano Mater 8:110–124. https://doi.org/10.1080/19475411.2017.1343754CrossRef

Hosseini R, Hamedi M, Im J et al (2017b) Analytical and experimental investigation of partially covered piezoelectric cantilever energy harvester. Int J Precis Eng Manuf 18:415–424. https://doi.org/10.1007/s12541-017-0050-3CrossRef

Hosseini R, Zargar O, Hamedi M (2018) Improving power density of piezoelectric vibration-based energy scavengers. J Solid Mech 10:98–109

Ibrahim SW, Ali WG (2012) A review on frequency tuning methods for piezoelectric energy harvesting systems. J Renew Sustain Energy 4:062703. https://doi.org/10.1063/1.4766892CrossRef

Jaffe B, Cook WR, Jaffe HL (1971) Piezoelectric ceramics. Academic Press, London

Jin L, Gao S, Zhou X, Zhang G (2017) The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output. Microsyst Technol 23:4805–4814. https://doi.org/10.1007/s00542-016-3261-0CrossRef

Kampmann P (2016) Development of a multi-modal tactile force sensing system for deep-sea applications. Ph.D. thesis, University of Bremen

Keshmiri A, Wu N, Keshmiri A, Wu N (2018) A wideband piezoelectric energy harvester design by using multiple non-uniform bimorphs. Vibration 1:93–104. https://doi.org/10.3390/vibration1010008CrossRef

Khalid A, Redhewal AK, Kumar M, Srivastav A (2015) Piezoelectric vibration harvesters based on vibrations of cantilevered bimorphs: a review. Mater Sci Appl 06:818–827. https://doi.org/10.4236/msa.2015.69084CrossRef

Kim S, Clark WW, Wang Q-M (2005a) Piezoelectric energy harvesting with a clamped circular plate: analysis. J Intell Mater Syst Struct 16:847–854. https://doi.org/10.1177/1045389X05054044CrossRef

Kim S, Clark WW, Wang Q-M (2005b) Piezoelectric energy harvesting with a clamped circular plate: experimental study. J Intell Mater Syst Struct 16:855–863. https://doi.org/10.1177/1045389X05054043CrossRef

Kim M, Hoegen M, Dugundji J, Wardle BL (2010) Modeling and experimental verification of proof mass effects on vibration energy harvester performance. Smart Mater Struct 19:045023. https://doi.org/10.1088/0964-1726/19/4/045023CrossRef

Kim M, Dugundji J, Wardle BL (2015) Efficiency of piezoelectric mechanical vibration energy harvesting. Smart Mater Struct 24:055006. https://doi.org/10.1088/0964-1726/24/5/055006CrossRef

Lallart M (2012) Small-scale energy harvesting. InTech, LondonCrossRef

Lead Titanate (2020) Investigations on beam geometries effect of placement of piezoelectric material and proof mass on the performance of energy harvester. Faculty of Mechanical Engineering, Anna University, Chennai. http://hdl.handle.net/10603/335502. Accessed 4 Jan 2019

Lee CS, Joo J, Han S, Koh SK (2004) Multifunctional transducer using poly (vinylidene fluoride) active layerand highly conducting poly (3,4-ethylenedioxythiophene) electrode: actuator and generator. Appl Phys Lett 85:1841–1843. https://doi.org/10.1063/1.1784890CrossRef

Lee CS, Joo J, Han S et al (2005) Poly (vinylidene fluoride) transducers with highly conducting poly (3,4-ethylenedioxythiophene) electrodes. Synth Met 152:49–52. https://doi.org/10.1016/J.SYNTHMET.2005.07.116CrossRef

Lesieutre GA, Ottman GK, Hofmann HF (2004) Damping as a result of piezoelectric energy harvesting. J Sound Vib 269:991–1001. https://doi.org/10.1016/S0022-460X(03)00210-4CrossRef

Li B, Laviage AJ, You JH, Kim Y-J (2013) Harvesting low-frequency acoustic energy using quarter-wavelength straight-tube acoustic resonator. Appl Acoust 74:1271–1278. https://doi.org/10.1016/J.APACOUST.2013.04.015CrossRef

Liao Y, Sodano HA (2012) Optimal placement of piezoelectric material on a cantilever beam for maximum piezoelectric damping and power harvesting efficiency. Smart Mater Struct 21:105014. https://doi.org/10.1088/0964-1726/21/10/105014CrossRef

Lin Y, Venna SV (2008) A novel method for piezoelectric transducers placement for passive vibration control of geometrically non-linear structures. Sens Rev 28:233–241. https://doi.org/10.1108/02602280810882599CrossRef

Lu F, Lee HP, Lim SP (2004) Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications. Smart Mater Struct 13:57–63. https://doi.org/10.1088/0964-1726/13/1/007CrossRef

Mateu L, Moll F (2005) Optimum piezoelectric bending beam structures for energy harvesting using shoe inserts. J Intell Mater Syst Struct 16:835–845. https://doi.org/10.1177/1045389X05055280CrossRef

Matova SP, Renaud M, Jambunathan M et al (2013) Effect of length/width ratio of tapered beams on the performance of piezoelectric energy harvesters. Smart Mater Struct 22:075015. https://doi.org/10.1088/0964-1726/22/7/075015CrossRef

Mažeika D, Čeponis A, Yang Y (2018) Multifrequency piezoelectric energy harvester based on polygon-shaped cantilever array. Shock Vib 2018:1–11. https://doi.org/10.1155/2018/5037187CrossRef

McCann J (2009) Smart clothes and wearable technology, first. Woodhead Publishing Ltd, CambridgeCrossRef

Mehrabian AR, Yousefi-Koma A (2007) Optimal positioning of piezoelectric actuators on a smart fin using bio-inspired algorithms. Aerosp Sci Technol 11:174–182. https://doi.org/10.1016/J.AST.2007.01.001CrossRef

Miller LM, Wright PK, Ho CC et al (2009) Integration of a low frequency, tunable MEMS piezoelectric energy harvester and a thick film micro capacitor as a power supply system for wireless sensor nodes. In: 2009 IEEE energy conversion congress and exposition. IEEE, p 2627–2634

Mohammadi F, Khan A, Cass RB (2002) Power generation from piezoelectric lead zirconate titanate fiber composites. MRS Proc 736(D5):5. https://doi.org/10.1557/PROC-736-D5.5CrossRef

Mossi K, Green C, Ounaies Z, Hughes E (2005) Harvesting energy using a thin unimorph prestressed bender: geometrical effects. J Intell Mater Syst Struct 16:249–261. https://doi.org/10.1177/1045389X05050008CrossRef

Mukherjee A, Datta U (2010) Comparative study of piezoelectric materials properties for green energy harvesting from vibration. In: 2010 annual IEEE India conference (INDICON). IEEE, p 1–4

Nain S, Rathore JS, Sharma NN (2018) Comparison of piezo-material based energy transduction systems for artificial nanoswimmer. IOP Conf Ser Mater Sci Eng 346:012079. https://doi.org/10.1088/1757-899X/346/1/012079CrossRef

Narayanan A, Kocherla A, Subramaniam KVL (2018) Understanding the coupled electromechanical response of a PZT patch attached to concrete: influence of substrate size. Measurement 124:505–514. https://doi.org/10.1016/J.MEASUREMENT.2018.04.055CrossRef

Ottman GK, Hofmann HF, Bhatt AC, Lesieutre GA (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Trans Power Electron 17:669–676. https://doi.org/10.1109/TPEL.2002.802194CrossRef

Paquin S, St-Amant Y (2010) Improving the performance of a piezoelectric energy harvester using a variable thickness beam. Smart Mater Struct 19:105020. https://doi.org/10.1088/0964-1726/19/10/105020CrossRef

Park J, Lee S, Kwak BM (2012) Design optimization of piezoelectric energy harvester subject to tip excitation. J Mech Sci Technol 26:137–143. https://doi.org/10.1007/s12206-011-0910-1CrossRef

Piezoelectricity Piezoelectricity (2018) https://en.wikipedia.org/wiki/Piezoelectricity. Accessed 21 Dec 2018

Pradeesh EL, Udhayakumar S (2019a) Investigation on the geometry of beams for piezoelectric energy harvester. Microsyst Technol 25:3463–3475. https://doi.org/10.1007/s00542-018-4220-8CrossRef

Pradeesh EL, Udhayakumar S (2019b) Effect of placement of piezoelectric material and proof mass on the performance of piezoelectric energy harvester. Mech Syst Signal Process 130:664–676. https://doi.org/10.1016/j.ymssp.2019.05.044CrossRef

Pradeesh EL, Udhayakumar S, Sathishkumar C (2019) Investigation on various beam geometries for piezoelectric energy harvester with two serially mounted piezoelectric materials. SN Appl Sci 1:1–11. https://doi.org/10.1007/s42452-019-1709-4CrossRef

Pradeesh EL, Udhayakumar S, Vasundhara MG, Vadivel Vivek V (2020) vibration based piezoelectric energy harvesting—a review. In: IOP conference series: materials science and engineering. IOP Publishing Ltd, p 012007

Pradeesh EL, Udhayakumar S, Vasundhara MG, Nijandhan K (2021) Design and development of frequency tuneable vibration based piezoelectric energy harvester. Ferroelectrics 584:85–99. https://doi.org/10.1080/00150193.2021.1984779CrossRef

Priya S, Inman DJ (2009) Energy harvesting technologies. Springer, BostonCrossRef

Rami Reddy A, Umapathy M, Ezhilarasi D, Gandhi U (2016) Improved energy harvesting from vibration by introducing cavity in a cantilever beam. J Vib Control 22:3057–3066. https://doi.org/10.1177/1077546314558498MathSciNetCrossRef

Reddy AR, Umapathy M, Ezhilarasi D, Uma G (2015) Cantilever beam with trapezoidal cavity for improved energy harvesting. Int J Precis Eng Manuf 16:1875–1881. https://doi.org/10.1007/s12541-015-0244-5CrossRef

Richards CD, Anderson MJ, Bahr DF, Richards RF (2004) Efficiency of energy conversion for devices containing a piezoelectric component. J Micromech Microeng 14:717–721. https://doi.org/10.1088/0960-1317/14/5/009CrossRef

Rosa M, De Marqui Junior C (2014) Modeling and analysis of a piezoelectric energy harvester with varying cross-sectional area. Shock Vib 2014:1–9. https://doi.org/10.1155/2014/930503CrossRef

Roundy S, Wright PK (2004) A piezoelectric vibration based generator for wireless electronics. Smart Mater Struct 13:1131–1142. https://doi.org/10.1088/0964-1726/13/5/018CrossRef

Roundy S, Wright PK, Rabaey J (2003) A study of low level vibrations as a power source for wireless sensor nodes. Comput Commun 26:1131–1144. https://doi.org/10.1016/S0140-3664(02)00248-7CrossRef

Roundy S, Leland ES, Baker J et al (2005) Improving power output for vibration-based energy scavengers. IEEE Pervasive Comput 4:28–36. https://doi.org/10.1109/MPRV.2005.14CrossRef

Salmani H, Rahimi GH, Hosseini Kordkheili SA (2015) An exact analytical solution to exponentially tapered piezoelectric energy harvester. Shock Vib 2015:1–13. https://doi.org/10.1155/2015/426876CrossRef

Saxena S, Sharma R, Pant BD (2017a) Design and development of guided four beam cantilever type MEMS based piezoelectric energy harvester. Microsyst Technol 23:1751–1759. https://doi.org/10.1007/s00542-016-2940-1CrossRef

Saxena S, Sharma R, Pant BD (2017b) Dynamic characterization of fabricated guided two beam and four beam cantilever type MEMS based piezoelectric energy harvester having pyramidal shape seismic mass. Microsyst Technol 23:5947–5958. https://doi.org/10.1007/s00542-017-3455-0CrossRef

Schoeftner J, Brandl A, Irschik H (2021) Stress control of a piezoelectric lumped-element model—theoretical investigation and experimental realization. J Appl Comput Mech 7:1110–1120. https://doi.org/10.22055/JACM.2020.33327.2203CrossRef

Sensortech (2019) https://sensortechcanada.com/technical-notes/piezoelectric-fundamentals/. Accessed 8 Jan 2019

Senthilkumar M, Vasundhara MG, Kalavathi GK (2018) Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester. Int J Mech Mater Des. https://doi.org/10.1007/s10999-018-9413-xCrossRef

Shafer MW, Garcia E (2013) the power and efficiency limits of piezoelectric energy harvesting. J Vib Acoust 136:021007. https://doi.org/10.1115/1.4025996CrossRef

Shen D, Choe S-Y, Kim D-J (2006) Comparison of piezoelectric materials for vibration energy conversion devices. MRS Proc 966:0966-T07-34. https://doi.org/10.1557/PROC-0966-T07-34CrossRef

Sloss JM, Bruch JC, Sadek IS, Adali S (2002) Integral equation approach for beams with multi-patch piezo sensors and actuators. Modal Anal 8:503–526. https://doi.org/10.1177/107754602028161MathSciNetCrossRefMATH

Sodano HA, Inman DJ, Park G (2005) Comparison of piezoelectric energy harvesting devices for recharging batteries. J Intell Mater Syst Struct 16:799–807. https://doi.org/10.1177/1045389X05056681CrossRef

Sodano HA, Lloyd J, Inman DJ (2006) An experimental comparison between several active composite actuators for power generation. Smart Mater Struct 15:1211–1216. https://doi.org/10.1088/0964-1726/15/5/007CrossRef

Somkuwar R, Chandwani J, Deshmukh R (2018) Wideband auto-tunable vibration energy harvester using change in centre of gravity. Microsyst Technol 24:3033–3044. https://doi.org/10.1007/s00542-018-3846-xCrossRef

Sparkler (2019) http://www.sparklerceramics.com/piezoeelectricbasics.html. Accessed 8 Jan 2019

Spier C, Bruch JC, Sloss JM et al (2009) Placement of multiple piezo patch sensors and actuators for a cantilever beam to maximize frequencies and frequency gaps. J Vib Control 15:643–670. https://doi.org/10.1177/1077546308094247MathSciNetCrossRefMATH

Statistical Review of World Energy 2019a (2020) http://hdl.handle.net/10603/335502. Accessed 18 Jun 2019

Sunithamani S, Lakshmi P (2017) Experimental study and analysis of unimorph piezoelectric energy harvester with different substrate thickness and different proof mass shapes. Microsyst Technol 23:2421–2430. https://doi.org/10.1007/s00542-016-2917-0CrossRef

Tang L, Wang J (2017) Size effect of tip mass on performance of cantilevered piezoelectric energy harvester with a dynamic magnifier. Acta Mech 228:3997–4015. https://doi.org/10.1007/s00707-017-1910-8MathSciNetCrossRefMATH

Umeda M, Nakamura K, Ueha S (1996) Analysis of the transformation of mechanical impact energy to electric energy using piezoelectric vibrator. Jpn J Appl Phys 35:3267–3273. https://doi.org/10.1143/JJAP.35.3267CrossRef

Umeda M, Nakamura K, Ueha S (1997) Energy storage characteristics of a piezo-generator using impact induced vibration. Jpn J Appl Phys 36:3146–3151. https://doi.org/10.1143/JJAP.36.3146CrossRef

Vasundhara MG, Senthilkumar M, Kalavathi GK (2018) A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester. Int J Mech Mater Des. https://doi.org/10.1007/s10999-018-9429-2CrossRef

Vives AA (ed) (2008) Piezoelectric transducers and applications. Springer, Berlin

Wang L, Yuan FG (2008) Vibration energy harvesting by magnetostrictive material. Smart Mater Struct 17:045009. https://doi.org/10.1088/0964-1726/17/4/045009CrossRef

Xu C-N, Akiyama M, Nonaka K, Watanabe T (1998) Electrical power generation characteristics of PZT piezoelectric ceramics. IEEE Trans Ultrason Ferroelectr Freq Control 45:1065–1070. https://doi.org/10.1109/58.710589CrossRef

Yang Z, Zu J (2016) Comparison of PZN-PT, PMN-PT single crystals and PZT ceramic for vibration energy harvesting. Energy Convers Manag 122:321–329. https://doi.org/10.1016/J.ENCONMAN.2016.05.085CrossRef

Yang J, Zhou H, Yuantai Hu, Jiang Q (2005) Performance of a piezoelectric harvester in thickness-stretch mode of a plate. IEEE Trans Ultrason Ferroelectr Freq Control 52:1872–1876. https://doi.org/10.1109/TUFFC.2005.1561644CrossRef

Zhou X, Gao S, Jin L et al (2018) Effects of changing PZT length on the performance of doubly-clamped piezoelectric energy harvester with different beam shapes under stochastic excitation. Microsyst Technol 24:3799–3813. https://doi.org/10.1007/s00542-018-3845-yCrossRef

Titel: A review on piezoelectric energy harvesting
verfasst von: E. L. Pradeesh
S. Udhayakumar
M. G. Vasundhara
G. K. Kalavathi
Publikationsdatum: 23.06.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Microsystem Technologies / Ausgabe 8/2022
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-022-05334-4

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Jonas Klose/© Pine Valley Capital GmbH, Carina Kießling von der Strategieberatung Roland Berger/© Monika Walther Fotografie | ATZ, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2022

Design of a piezoelectric–electromagnetic hybrid vibration energy harvester operating under ultra-low frequency excitation

Piezoelectric elements subjected to low frequency excitation. Empirical determination of stress and frequency influence on piezoelectric parameters

Design of a novel spatial micro-gripper for manipulating irregular shape micro objects

Recent advances on MEMS based Infrared Thermopile detectors

Research on a valveless piezoelectric pump with inner concave triangle structure

Analysis of nonlinear vibration and instability of electrostatic functionally graded micro-actuator based on nonlocal strain gradient theory considering thickness effect

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.