nach oben

Tribology Letters

Erschienen in:

01.12.2018 | Original Paper

A Tribological Study of γ-Fe₂O₃ Nanoparticles in Aqueous Suspension

verfasst von: T. N. Pardue, B. Acharya, C. K. Curtis, J. Krim

Erschienen in: Tribology Letters | Ausgabe 4/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the nano- and macroscale tribological properties of maghemite (γ-Fe₂O₃) nanoparticles in aqueous solution are compared and contrasted for alumina contacts as a function of nanoparticle concentration. A quartz crystal microbalance (QCM) technique was used for nanotribology measurements and a ball-on-disk method was used to measure macroscale friction coefficients. Statistical methods were employed to identify significant associations between the QCM and ball-on-disk measurements, employing selected candidate performance factors for each system. In particular, the macroscale response was parameterized by % reduction in the friction coefficient while candidate QCM “bulk” and “surface” performance factors were selected from functions of the frequency f and resistance R_m shifts upon addition of nanoparticles to the water surrounding the QCM. Incremental increases in concentration were performed and reductions in friction and drag forces were observed for concentrations up to 0.6 wt%, after which further reductions were not observed. The factor δR_film/δf_film exhibited a linear correlation with the reduction in macroscale friction coefficient, defined as the ratio of the shift in resistance to the shift in frequency attributable to interfacial effects and changes in the glide plane location. Atomic force microscopy was also utilized to both qualitatively and quantitatively determine surface roughness before and after particle uptake, leading to the observations that particles are easily removed from the surface and do not significantly alter surface morphology.

Vorheriger Artikel Effect of Counterparts and Applied Load on the Tribological Behavior of the Graphene–Nickel Matrix Self-Lubricating Composite

Nächster Artikel Characterization of the Adsorption Mechanism of Manganese Phosphate Conversion Coating Derived Tribofilms

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Wu, H., Zhao, J., Xia, W., Cheng, X., He, A., Hui Wu, A., Yun, J.-H., Wang, L., Huang, H., Jiao, S., Huang, L., Zhang, S., Jiang, Z.: A study of the tribological behaviour of TiO₂ nano- additive water-based lubricants Study on tribological behaviour of TiO 2 nano-additive water-based lubricants. Tribol. Int. 109, 398–408 (2017)CrossRef

Osawa, E.: Nanodiamond-an emerging nano-carbon material. In: Somiya S. (ed.) Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties. pp. 89–102. Academic Press, Amsterdam (2013)

Torres-Sanchez, C., Balodimos, N.: Effective and eco-friendly lubrication protocol using nanodiamonds in a dry regime for conveyor systems in the beverage industry. 30, 209–218 (2017). https://doi.org/10.1002/pts.2294 CrossRef

Betton, C.I.: Lubricants and their environmental impact. In: Chemistry and Technology of Lubricants, pp. 282–298. Springer, Boston (1994)CrossRef

Mortier, R.M., Fox, M.F., Orszulik, S.T.: Chemistry and Technology of Lubricants. Springer Dordrecht (2010)

Dai, W., Liang, H., Kheireddin, B., Gao, H.: Roles of nanoparticles in oil lubrication high-temperature nano-tribology properties of sub-20 nm coatings and thin films view project roles of nanoparticles in oil lubrication. (2017). https://doi.org/10.1016/j.triboint.2016.05.020 CrossRef

Chiñas-Castillo, F., Spikes, H.A.: Mechanism of action of colloidal solid dispersions. J. Tribol. 125, 552 (2003). https://doi.org/10.1115/1.1537752 CrossRef

Jacobson, S., Hogmark, S.: Surface modifications in tribological contacts. Wear. 266, 370–378 (2009). https://doi.org/10.1016/j.wear.2008.04.035 CrossRef

Liu, Z., Leininger, D., Koolivand, A., Smirnov, A.I., Shenderova, O., Brenner, D.W., Krim, J.: Tribological properties of nanodiamonds in aqueous suspensions: effect of the surface charge. RSC Adv. 5, 78933–78940 (2015). https://doi.org/10.1039/C5RA14151F CrossRef

10.

Curtis, C.K., Marek, A., Smirnov, A.I., Krim, J.: A comparative study of the nanoscale and macroscale tribological attributes of alumina and stainless steel surfaces immersed in aqueous suspensions of positively or negatively charged nanodiamonds. Beilstein J. Nanotechnol. 8, 2045–2059 (2017). https://doi.org/10.3762/bjnano.8.205 CrossRef

11.

Acharya, B., Chestnut, M., Marek, A., Smirnov, A.I., Krim, J.: A combined QCM and AFM study exploring the nanoscale lubrication mechanism of silica nanoparticles in aqueous suspension. Tribol. Lett. 65, 115 (2017). https://doi.org/10.1007/s11249-017-0898-5 CrossRef

12.

Lodge, M.S., Tang, C., Blue, B.T., Hubbard, W.A., Martini, A., Dawson, B.D., Ishigami, M.: Lubricity of gold nanocrystals on graphene measured using quartz crystal microbalance. Sci. Rep. 6, 31837 (2016). https://doi.org/10.1038/srep31837 CrossRef

13.

Krim, J.: Friction and energy dissipation mechanisms in adsorbed molecules and molecularly thin films. Adv. Phys. 61, 155–323 (2012). https://doi.org/10.1080/00018732.2012.706401 CrossRef

14.

Song, X., Qiu, Z., Yang, X., Gong, H., Zheng, S., Cao, B., Wang, H., Möhwald, H., Shchukin, D.: Submicron-lubricant based on crystallized Fe₃O₄ spheres for enhanced tribology performance. Chem. Mater. 26, 5113–5119 (2014). https://doi.org/10.1021/cm502426y CrossRef

15.

Barrau, O., Boher, C., Vergne, C., Rezai-Aria, F., Gras, R.: Investigations of friction and wear mechanisms of hot forging tool steels. Karlstad Univ. 1, 81–94 (2002)

16.

Zhou, Y., Wang, S.Q., Chen, W., Jin, Y.X., Wang, L., Chen, K.M., Cui, X.H.: Effect of various nanoparticles on tribo-layers and wear behavior of TC11 alloy. Metall. Mater. Trans. A. 48, 3287–3299 (2017). https://doi.org/10.1007/s11661-017-4131-9 CrossRef

17.

Colombié, C., Berthier, Y., Floquet, A., Vincent, L., Godet, M.: Fretting: load carrying capacity of wear debris. J. Tribol. 106, 194–201 (1984). https://doi.org/10.1115/1.3260881 CrossRef

18.

Cornell, R.M., Schwertmann, U.: The Iron Oxides. Wiley (2003)

19.

Thünemann, A.F., Schütt, D., Kaufner, L., Pison, U., Möhwald, H.: Maghemite nanoparticles protectively coated with poly(ethylene imine) and poly(ethylene oxide)-block-poly(glutamic acid). Langmuir. 22, 2351–2357 (2006). https://doi.org/10.1021/LA052990D CrossRef

20.

Jeong, J.R., Lee, S.J., Kim, J.D., Shin, S.C.: Magnetic properties of gamma-Fe2O3 nanoparticles made by coprecipitation method. Phys. Status Solidi Basic Res. 241, 1593–1596 (2004). https://doi.org/10.1002/pssb.200304549 CrossRef

21.

Halliday, J.S., Hirst, W.: The fretting corrosion of mild steel. Proc. R. Soc. Lond. 236, 411–425 (1956)CrossRef

22.

Kato, H.: Severe-mild wear transition by supply of oxide particles on sliding surface. Wear. 255, 426–429 (2003). https://doi.org/10.1016/S0043-1648(03)00077-2 CrossRef

23.

Kato, H., Komai, K.: Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces. Wear. 262, 36–41 (2007). https://doi.org/10.1016/j.wear.2006.03.046 CrossRef

24.

Jiang, J., Stott, F.H., Stack, M.M.: The role of triboparticles in dry sliding wear. Tribol. Int. 31, 245–256 (1998)CrossRef

25.

Stott, F.H., Wood, G.C.: The influence of oxides on the friction and wear of alloys. Tribol. Int. 11, 211–218 (1978). https://doi.org/10.1016/0301-679X(78)90178-0 CrossRef

26.

Kato, H.: Effects of supply of fine oxide particles onto rubbing steel surfaces on severe-mild wear transition and oxide film formation. Tribol. Int. 41, 735–742 (2008). https://doi.org/10.1016/j.triboint.2008.01.001 CrossRef

27.

Hu, Z.S., Dong, J.X., Chen, G.X.: Study on antiwear and reducing friction additive of nanometer ferric oxide. Tribol. Int. 31, 355–360 (1998). https://doi.org/10.1016/S0301-679X(98)00042-5 CrossRef

28.

Iwabuchi, A., Kubosawa, H., Hori, K.: The dependence of the transition from severe to mild wear on load and surface roughness when the oxide particles are supplied before sliding. Wear. 139, 319–333 (1990). https://doi.org/10.1016/0043-1648(90)90054-E CrossRef

29.

Iwabuchi, A., Hori, K., Kubosawa, H.: The effect of oxide particles supplied at the interface before sliding on the severe-mild wear transition. Wear. 128, 123–137 (1988). https://doi.org/10.1016/0043-1648(88)90179-2 CrossRef

30.

Iwabuchi, A.: The role of oxide particles in the fretting wear of mild-steel. Wear. 151, 301–311 (1991). https://doi.org/10.1016/0043-1648(91)90257-u CrossRef

31.

Antonov, M., Afshari, H., Baronins, J., Adoberg, E., Raadik, T., Hussainova, I.: The effect of temperature and sliding speed on friction and wear of Si₃N₄, Al₂O₃, and ZrO₂ balls tested against AlCrN PVD coating. Tribol. Int. 118, 500–514 (2018). https://doi.org/10.1016/j.triboint.2017.05.035 CrossRef

32.

Parker, D.A.: Ceramics Technology—application to engine components. Proc. Inst. Mech. Eng. Part A. 199, 135–150 (1985). https://doi.org/10.1243/PIME_PROC_1985_199_020_02 CrossRef

33.

Hubbe, M.: Steric Stabilization, https://projects.ncsu.edu/project/hubbepaperchem/Defnitns/StericSt.htm

34.

Napper, D., Netschey, A.: Studies of the steric stabilization of colloidal particles. J. Colloid Interface Sci. 37, 528–535 (1971). https://doi.org/10.1016/0021-9797(71)90330-4 CrossRef

35.

Lazarowich, R.J., Taborek, P., Yoo, B.-Y., Myung, N.V.: Fabrication of porous alumina on quartz crystal microbalances. J. Appl. Phys. 101, 104909 (2007). https://doi.org/10.1063/1.2730563 CrossRef

36.

QCM200 Quartz Crystal Microbalance: Digital Controller-QCM25 5 MHz Crystal Oscillator, Revision 2

37.

Qiao, X., Zhang, X., Tian, Y., Meng, Y.: Progresses on the theory and application of quartz crystal microbalance. Appl. Phys. Rev. 3, 031106 (2016). https://doi.org/10.1063/1.4963312 CrossRef

38.

Pisov, S., Tosatti, E., Tartaglino, U., Vanossi, A.: Gold clusters sliding on graphite: a possible quartz crystal microbalance experiment? J. Phys. Condens. Matter. 19, 305015 (2007). https://doi.org/10.1088/0953-8984/19/30/305015 CrossRef

39.

Highland, M., Krim, J.: Superconductivity dependent friction of water, nitrogen, and superheated He films adsorbed on Pb(111). Phys. Rev. Lett. 96, 226107 (2006). https://doi.org/10.1103/PhysRevLett.96.226107 CrossRef

40.

Vlachová, J., König, R., Johannsmann, D.: Stiffness of sphere–plate contacts at MHz frequencies: dependence on normal load, oscillation amplitude, and ambient medium. Beilstein J. Nanotechnol. 6, 845–856 (2015). https://doi.org/10.3762/bjnano.6.87 CrossRef

41.

Sauerbrey, G.: Use of quartz crystals for weighing thin layers and for weighing. Z. Phys. 155, 206–222 (1959). https://doi.org/10.1007/BF01337937 CrossRef

42.

Kanazawa, K.K., Gordon, J.G.: Frequency of a quartz microbalance in contact with liquid. Anal. Chem. 57, 1770–1771 (1985). https://doi.org/10.1021/ac00285a062 CrossRef

43.

Hanke, W., Petri, J., Johannsmann, D.: Partial slip in mesoscale contacts: dependence on contact size. Phys. Rev. E. 88, 1–14 (2013)

44.

Huang, X., Bai, Q., Hu, J., Hou, D.: A practical model of quartz crystal microbalance. Sensors. 17, 1–9 (2017). https://doi.org/10.3390/s17081785 CrossRef

45.

Mishra, P.C., Mukherjee, S., Nayak, S.K., Panda, A.: A brief review on viscosity of nanofluids. Int. Nano Lett. 4, 109–120 (2014). https://doi.org/10.1007/s40089-014-0126-3 CrossRef

46.

Manikandan, S., Karthikeyan, N., Rajan, K.S.: Viscosity of Fe₂O₃ nanoparticles dispersion in water and ethylene glycol-water mixture (nanofluids). Int. J. Nanoparticles. 6, 10 (2013). https://doi.org/10.1504/IJNP.2013.051912 CrossRef

47.

Krim, J., Heyvaert, I., Van Haesendonck, C., Bruynseraede, Y.: Scanning tunneling microscopy observation of self-affine fractal roughness in ion-bombarded film surfaces. Phys. Rev. Lett. 70, 57–60 (1993). https://doi.org/10.1103/PhysRevLett.70.57 CrossRef

48.

Krim, J., Indekeu, J.O.: Roughness exponents: a paradox resolved. Phys. Rev. E. 48, 1576–1578 (1993). https://doi.org/10.1103/PhysRevE.48.1576 CrossRef

49.

Palasantzas, G., Krim, J.: Scanning tunneling microscopy study of the thick film limit of kinetic roughening. Phys. Rev. Lett. 73, 3564–3567 (1994). https://doi.org/10.1103/PhysRevLett.73.3564 CrossRef

50.

Becker, E.: Trends in tribological materials and engine technology. Tribol. Int. 37, 569–575 (2004)CrossRef

51.

Huang, K., Szlufarska, I.: Friction and slip at solid/liquid interface in vibrational systems Langmuir. 28, 17302–17312 (2012).

52.

Huang, K., Szlufarska, I.: Green-Kubo relation for friction at liquid/solid interface. Physical Rev. E 89, 032119 (2016)

53.

Eklund, E.A., Bruinsma, R., Rudnick, J., Williams, R.S.: Submicron-scale surface roughening induced by ion bombardment. Phys. Rev. Lett. 67, 1759 (1991)CrossRef

54.

Adachi, K., Kato, K.: Formation of smooth wear surfaces on alumina ceramics by embedding and tribo-sintering of fine wear particles. Wear. 245, 84–91 (2000). https://doi.org/10.1016/S0043-1648(00)00468-3 CrossRef

55.

Xue, Q., Liu, W., Zhang, Z.: Friction and wear properties of a surface-modified TiO₂ nanoparticle as an additive in liquid paraffin. Wear. 213, 29–32 (1997). https://doi.org/10.1016/S0043-1648(97)00200-7 CrossRef

56.

Xiang, L., Gao, C., Wang, Y., Pan, Z., Hu, D.: Tribological and tribochemical properties of magnetite nanoflakes as additives in oil lubricants. Particuology. 17, 136–144 (2014). https://doi.org/10.1016/j.partic.2013.09.004 CrossRef

57.

Sunqing, Q., Junxiu, D., Guoxu, C.: Wear and friction behaviour of CaCO₃ nanoparticles used as additives in lubricating oils. Lubr. Sci. 12, 205–212 (2000). https://doi.org/10.1002/ls.3010120207 CrossRef

58.

Coles, J.M., Chang, D.P., Zauscher, S.: Molecular mechanisms of aqueous boundary lubrication by mucinous glycoproteins. Curr. Opin. Colloid Interface Sci. 15, 406–416 (2010). https://doi.org/10.1016/j.cocis.2010.07.002 CrossRef

59.

Krim, J., Widom, A.: Damping of a crystal oscillator by an adsorbed monolayer and its relation to interfacial viscosity. Phys. Rev. B 38, 12184 (1988)CrossRef

60.

Bruschi, L., Mistura, G.: Measurement of the friction of thin films by means of a quartz microbalance in the presence of a finite vapor pressure. Phys. Rev. B 63, 235411 (2001)CrossRef

61.

Popov, V.L.: Coulomb’s law of friction. In: Contact Mechanics of Friction. p. 134 (2010)

62.

Fajardo, O.Y., Bresme, F., Kornyshev, A.A., Urbakh, M.: Electrotunable friction with ionic liquid lubricants: how important is the molecular structure of the ions? https://doi.org/10.1021/acs.jpclett.5b01802 CrossRef

63.

Fajardo, O.Y., Bresme, F., Kornyshev, A.A., Urbakh, M.: Electrotunable lubricity with ionic liquid nanoscale films. https://doi.org/10.1038/srep07698

Titel: A Tribological Study of γ-Fe2O3 Nanoparticles in Aqueous Suspension
verfasst von: T. N. Pardue
B. Acharya
C. K. Curtis
J. Krim
Publikationsdatum: 01.12.2018
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 4/2018
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-018-1083-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2018

Characterization of DLC-Coated and Uncoated Surfaces by New Directional Blanket Curvature Covering (DBCC) Method

Interaction of Hyaluronic Acid with CoCr Alloy Under Immersion and Wear–Corrosion Processes

Tribological Performance of UHMWPE/GNPs Nanocomposite Coatings for Solid Lubrication in Bearing Applications

Influence of Dispersant and ZDDP on Soot Wear

Effect of Contamination on the Friction and Wear of Carboxylic Acids in Aqueous Lubricants

Use of FIB to Study ZDDP Tribofilms

Premium Partner

Marktübersichten