nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles

verfasst von : Jose J. Restrepo, Henry A. Colorado

Erschienen in: TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this research, polymer composites of epoxy resin matrix with magnetite particles were fabricated by additive manufacturing using the direct ink writing (DIW) technique. Four different formulations of epoxy resin-magnetite powders were fabricated, from which only one showed promising results regarding the dimensional stability and finishing of the printed samples. Four formulations were found to be feasible for the printing process, in which epoxy resin was varied from 32.6 to 41 wt%, while the magnetite powder changed from 67.4 to 69 wt% correspondingly. Compression tests were performed over all printed parts, compressive strength mean values and ductility results are presented. In addition, microstructural characterization was performed by scanning electron microscopy (SEM).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel

Nächstes Kapitel Admixture Optimization in Concrete Using Superplasticizers

Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies, vol 238. Springer, New YorkCrossRef

Zocca A, Colombo P, Gomes CM, Günster J (2015) Additive manufacturing of ceramics: issues, potentialities, and opportunities. J Am Ceram Soc 98(7):1983–2001. https://doi.org/10.1111/jace.13700CrossRef

Travitzky N, Bonet A, Dermeik B, Fey T, Filbert-Demut I, Schlier L, Schlordt T, Greil P (2014) Additive manufacturing of ceramic-based materials. Adv Eng Mater 16(6):729–754CrossRef

Gosselin C, Duballet R, Roux P, Gaudillière N, Dirrenberger J, Morel P (2016) Large-scale 3D printing of ultra-high performance concrete—a new processing route for architects and builders. Mater Des 100:102–109CrossRef

Revelo CF, Colorado HA (2018) 3D printing of kaolinite clay ceramics using the direct ink writing (DIW) technique. Ceram Int (in press)

Kumar A, Mandal S, Barui S, Vasireddi R, Gbureck U, Gelinsky M, Basu B (2016) Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: processing related challenges and property assessment. Mater Sci Eng: R: Rep 103:1–39CrossRef

Quan Z, Wu A, Keefe M, Qin X, Yu J, Suhr J, Chou TW (2015) Additive manufacturing of multi-directional preforms for composites: opportunities and challenges. Mater Today 18(9):503–512CrossRef

Kaisaki DA, Mitra SB, Schultz WJ, DeVoe RJ (1999) U.S. Patent No. 5,856,373. U.S. Patent and Trademark Office, Washington, DC

Clemons C (2002) Wood-plastic composites in the United States: the interfacing of two industries. Forest Prod J 52(6):10

10.

Lewis JA, Smay JE, Stuecker J, Cesarano J (2006) Direct ink writing of three‐dimensional ceramic structures. J Am Ceram Soc 89(12):3599–3609CrossRef

11.

Lewis JA (2006) Direct ink writing of 3D functional materials. Adv Funct Mater 16(17):2193–2204CrossRef

Titel: Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles
verfasst von: Jose J. Restrepo
Henry A. Colorado
Verlag: Springer International Publishing
Buch: TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings
Print ISBN: 978-3-319-72525-3

Electronic ISBN: 978-3-319-72526-0

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-319-72526-0_58

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht