1 Introduction
The use of adobe construction in the Aveiro district reflected the properties of the existing raw materials available to be applied, namely sand, clay sediments and soils and lime (Silveira et al. 2012), and there is an evident heterogeneity of the adobes linked to the geographic distribution of the available resources. In Aveiro there was a semi-industrial production of adobe, some small companies employing ‘adobeiros’, for the manufacture of blocks of adobe, along with a domestic self-production (Costa et al. 2016). Most conventional consolidation treatments used in the past have not succeeded in providing a long-term solution because they did not tackle the main cause of degradation, the expansion and contraction of constituent clay minerals in response to humidity changes. Clay swelling could be reduced significantly by transforming clay minerals into non-expandable binding materials with cementing capacity using alkaline activation.
2 Methods and Approaches
The chemical composition of diatomite samples was assessed by X-ray fluorescence (XRF), qualitative mineralogical analyses were carried out by X- ray diffraction (XRD). Compressive strength tests use a universal mechanical compression testing machine (Shimadzu Autograph AG 25 TA).
Anzeige
3 Results and Conclusions
Mineralogically, samples are composed by quartz, feldspars and phyllosilicates, however, there is an evidence of the presence of amorphous alumino-silicate phases. Samples with higher mechanical strength are associated with higher specific surface areas, namely, those with NaOH. The alkaline activation promotes the increase of mechanical resistance. With the exception of one sample, all the samples present promising mechanical resistances for their application in rehabilitation works on adobe buildings, since these do not require high resistance, even for the sake of compatibility.
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.