nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

19.11.2021 | Critical Review

An overview of hand-eye calibration

verfasst von: Jianfeng Jiang, Xiao Luo, Qingsheng Luo, Lijun Qiao, Minghao Li

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Due to the increase in the difficulty and diversity of tasks performed by robots, robot “hand-eye” collaborative operation has attracted widespread attention. This technology is widely used in aerospace, medical, automotive, and industrial fields. Recently, hand-eye calibration technology is developing towards high precision and high intelligence. However, it has much work to be done in terms of identifying robot and camera parameters. This article introduces in detail the methods and theories involved in hand-eye calibration. According to the structure of the algorithm and the type of the optimization method, this paper summarizes the hand-eye calibration method into four steps: camera pose, mechanical claw pose, mathematical model, and error metrics. The well-known open problems about hand-eye calibration are finally stated, and some new research interests are also pointed out. The results of this review are useful for robot technicians to choose the correct parameter identification method and for researchers to determine further research areas.

Vorheriger Artikel Industry 4.0, transition or addition in SMEs? A systematic literature review on digitalization for deviation management

Nächster Artikel Development of clinching process for various materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Wu L, Ren HL (2017) Finding the kinematic base frame of a robot by hand-eye calibration using 3D position data. IEEE Trans Autom Sci Eng 14(1):314–324

Zhan Q, Wang X (2012) Hand–eye calibration and positioning for a robot drilling system. Int J Adv Manuf Technol 61:691–701. https://doi.org/10.1007/s00170-011-3741-4CrossRef

Li WL, Xie H, Zhang G, Yan S, Yin Z (2016) Hand–eye calibration in visually-guided robot grinding. IEEE Trans Cybern 46(11):2634–2642. https://doi.org/10.1109/TCYB.2015.2483740CrossRef

Pachtrachai K, Allan M, Pawar V, Hailes S, Stoyanov D (2016) Hand-eye calibration for robotic assisted minimally invasive surgery without a calibration object. 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS): 2485–2491. https://doi.org/10.1109/IROS.2016.7759387

Thompson S, Stoyanov D, Schneider C, Gurusamy K, Ourselin S, Davidson B, Hawkes D, Clarkson MJ (2016) Hand–eye calibration for rigid laparoscopes using an invariant point. Int J CARS 11(6):1071–1080. https://doi.org/10.1007/s11548-016-1364-9CrossRef

Corrochano EB, Daniilidis K, Sommer G (2000) Motor algebra for 3D kinematics: the case of the hand-eye calibration. J Math Imaging Vis 13(2):79–100. https://doi.org/10.1023/A:1026567812984MathSciNetCrossRefMATH

Hou Z, Xu Y, Xiao R, Chen S (2020) A teaching-free welding method based on laser visual sensing system in robotic GMAW. Int J Adv Manuf Technol 109:1755–1774. https://doi.org/10.1007/s00170-020-05774-0CrossRef

Zhang ZY (2000) A flexible new technique for camera calibration. IEEE Trans Pattern Anal Mach Intell 22(11):1330–1334

Zhang YZ (2010) Research on hand-eye calibration technology of industrial robot. Dissertation, Harbin Engineering University.

10.

Celozzi C, Paravati G, Sanna A, Lamberti F (2010) A 6-DOF ARTag-based tracking system. IEEE Trans Consum Electron 56(1):203–210. https://doi.org/10.1109/TCE.2010.5439146CrossRef

11.

Tsai R (1987) A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses. IEEE J Robot Autom 3(4):323–344. https://doi.org/10.1109/JRA.1987.1087109CrossRef

12.

Heikkila J, Silvcn O (1997). A four-step camera calibration procedure with implicit image correction. Proceedings of IEEE Computer Society Conference on Computer Vision and Pattern Recognition: 1106-1112. 10.1109/CVPR.1997.609468

13.

Zhang MY, Tai RK, Li FD, Yang YQ (2016) Calibration of monocular camera based on improved genetic algorithm. Artif Intell Robot Res 5(3):53–62

14.

Fiala M (2005) Comparing ARTag and ARToolkit Plus fiducial marker systems. IEEE International Workshop on Haptic Audio Visual Environments and their Applications:148-153

15.

Kato H, Billinghurst M (2002) Marker tracking and HMD calibration for a video-based augmented reality conferencing system. IEEE & Acm International Workshop on Augmented Reality: 85-94.

16.

Abdullah J, Martinez K (2002) Camera self-calibration for the ARToolkit. The First IEEE International Workshop Agumented Reality Toolkit: 5-10.

17.

Tanaka H, Ogata K, Matsumoto Y (2017) Improving the accuracy of visual markers by four dots and image interpolation. 2016 IEEE International Symposium on Robotics and Intelligent Sensors (IRIS): 178-183. 10.1109/IRIS.2016.8066087

18.

Fiala M (2005) ARTag, A fiducial marker system using digital techniques. 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) 2:590-596. 10.1109/CVPR.2005.74

19.

Atcheson B, Heide F, Heidrich W (2010) CALTag: high precision fiducial markers for camera calibration. Proceedings of the Vision, Modeling, and Visualization Workshop 2010:41–48

20.

Kam HC, Yu YK, Wong KH (2018) An improvement on ArUco marker for pose tracking using Kalman filter. 2018 19th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence. Networking and Parallel/Distributed Computing (SNPD) 1:65–69

21.

Olson E (2011) AprilTag: a robust and flexible visual fiducial system. IEEE International Conference on Robotics and Automation 2011:3400–3407. https://doi.org/10.1109/ICRA.2011.5979561CrossRef

22.

Wang J, Olson E (2016) AprilTag 2: efficient and robust fiducial detection. IEEE/RSJ International Conference on Intelligent Robots & Systems: 4193-4198.

23.

Abbas SM, Aslam S, Berns K, Muhammad A (2019) Analysis and improvements in AprilTag based state estimation. Sensors 19(24):5480–5512. https://doi.org/10.3390/s19245480CrossRef

24.

Maybank SJ, Faugeras OD (1992) A theory of self-calibration of a moving camera. Int J Comput Vis 8(2):123–151

25.

Sinha D, Giardina C (1990) Discrete black and white object recognition via morphological functions. IEEE Transactions on Pattern Analysis & Machine Intelligence 26(3):275–293. https://doi.org/10.1109/34.49053CrossRef

26.

Li H, Zhang H, Wu F, Hu Z (2002) A new linear camera self-calibration technique. Chin J Comput 11:1121–1129MathSciNet

27.

Li F, Sekkati H, Deglint J, Scharfenberger C, Lamm M, Clausi D, Zelek J, Wong A (2017) Simultaneous projector-camera self-calibration for three-dimensional reconstruction and projection mapping. IEEE Transactions on Computational Imaging 3(1):74–83. https://doi.org/10.1109/TCI.2017.2652844MathSciNetCrossRef

28.

Denavit J, Hartenberg RS (1965) A kinematic notation for lower-pair mechanisms based on matrices. J Appl Mech 22(2):215–221MathSciNetMATH

29.

Hayati SA (1983) Robot arm geometric link parameter estimation. The 22nd IEEE Conference on Decision and Control:1477-1483. 10.1109/CDC.1983.269783

30.

Hayati S, Tso K, Roston G (1988) Robot geometry calibration. 988 IEEE International Conference on Robotics and Automation 2: 947-951.

31.

Gan Y, Duan J, Dai X (2019) A calibration method of robot kinematic parameters by drawstring displacement sensor. Int J Adv Robot Syst 5:1–9

32.

Chen Q, Zhou Z, Liu C, Sun X (2020) Design of a vision calibration method of ksinematic parameters for 6-DoF manipulator. J Tongji Univ 48(07):1023–1029

33.

Li Z, Li S, Luo X (2021) An overview of calibration technology of industrial robots. J Automat Sin 8(1):23–36. https://doi.org/10.1109/JAS.2020.1003381CrossRef

34.

Okamura K, Park FC (1996) Kinematic calibration using the product of exponentials formula. Robotica 14(4):415–422

35.

Chen IM, Yang G (1997) Kinematic calibration of modular reconfigurable robots using product-of- exponentials formula. J Robot Syst 14(11):807–821MATH

36.

Chen IM, Yang G, Tan CT, Song HY (2001) Local POE model for robot kinematic calibration. Mech Mach Theory 36(11):1215–1239MATH

37.

Li C, Wu Y, Harald L, Li Z (2016) Poe-based robot kinematic calibration using axis configuration space and the adjoint error model. IEEE Trans Robot 32(5):1264–1279. https://doi.org/10.1109/TRO.2016.2593042CrossRef

38.

Toan NV, Khoi PB (2018) A svd-least-square algorithm for manipulator kinematic calibration based on the product of exponentials formula. J Mech Sci Technol 32(11):5401–5409

39.

Zhuang H, Roth ZS (1992) A complete and parametrically continuous kinematic model. IEEE Trans Robot Autom 8(4):451–463

40.

Roberts KS (1988) A new representation for a line. Conference on Computer Vision & Pattern Recognition:635–640

41.

Meng Y, Zhuang H (2007) Autonomous robot calibration using vision technology. Robot Comput Integr Manuf 23(4):436–446

42.

Zorski W (2017) Quaternion-based determination of 3D objects orientation. 2017 22nd International Conference on Methods and Models in Automation and Robotics (MMAR):232-237

43.

Li G, Zhang F, Fu Y, Wang S (2019) Kinematic calibration of serial robot using dual quaternions. Industrial robot: the international journal of robotics research and application 46:247–258

44.

Wang W, Liu F, Yun C (2015) Calibration method of robot base frame using unit quaternion form. Precis Eng 41:47–54

45.

Wang G, Liu X, Han S (2018) A method of robot base frame calibration by using dual quaternion algebra. IEEE Access 6:74865–74873

46.

Ozgur E, Mezouar Y (2016) Kinematic modeling and control of a robot arm using unit dual quaternions. Robot Auton Syst 77:66–73

47.

Tsai RY, Lenz RK (1989) A new technique for fully autonomous and efficient 3D robotics hand/eye calibration. IEEE Trans Rob Autom 5(3):345–358

48.

Shiu YC, Ahmad S (1989) Calibration of wrist-mounted robotic sensors by solving homogeneous transform equations of the form AX=XB 5(1):16-29.

49.

Wang CC (2002) Extrinsic calibration of a vision sensor mounted on a robot. IEEE Trans Rob Autom 8(2):161–175

50.

Park FC, Martin BJ (2002) Robot sensor calibration: solving AX=XB on the Euclidean group. IEEE Trans Rob Autom 10(5):717–721

51.

Ma SD (1996) A self-calibration technique for active vision systems. IEEE Trans Robotics Automat 12(1):114–120

52.

Andreff N, Horaud R, Espiau B (1999) On-line hand-eye calibration. Proceedings of the 2nd international conference on 3-D digital imaging and modeling: 430-436. https://doi.org/10.1109/IM.1999.805374

53.

Wang Y, Duan S, Gao RZ, Zhuang W (2019) Research on robot hand-eye calibration algorithm based on dual quaternion. Mechanical and electrical engineering 36(7):755–765

54.

Daniilidis K (1999) Hand-eye calibration using dual quaternions. Int J Robot Res 18(3):286–298

55.

Wang C, Li L (2019) Robot hand-eye calibration algorithm based on quaternion. Sens Microsyst 38(012):133–135

56.

Luo B, Zhang X, Luo C (2019) Binocular robot hand-eye calibration algorithm integrating rodrigue matrix and whole least squares. J Surv Mapp Sci Technol 3:244–249

57.

Horaud R, Dornaika F (1995) Hand-eye calibration. Int J Robot Res 14(3):195–210

58.

Andreff N, Horaud R, Espiau B (2001) Robot hand-eye calibration using structure-from-motion. Int J Robot Res 20(3):228–248

59.

Zhang Y (2009) Research on hand-eye calibration technology of industrial robot. Dissertation, Harbin Engineering University

60.

Zhao Z (2011) Hand-eye calibration using convex optimization. IEEE International Conference on Robotics & Automation: 2947-2952.

61.

Heller J, Havlena M, Pajdla T (2016) Globally optimal hand-eye calibration using branch-and-bound. IEEE Trans Pattern Anal Mach Intell 38(5):1027–1033

62.

Zhuang H, Roth ZS, Sudhakar R (1994) Simultaneous robot/world and tool/flange calibration by solving homogeneous transformation equations of the form AX=YB. IEEE Trans Robot Autom 10(4):549–554

63.

Dornaika F, Horaud R (1998) Simultaneous robot-world and hand-eye calibration. IEEE Trans Rob Autom 14(4):617. https://doi.org/10.1109/70.704233CrossRef

64.

Hirsh RL, Desouza GN, Kak AC (2001) An iterative approach to the hand-eye and base-world calibration problem. IEEE International Conference on Robotics & Automation 3:2171–2176

65.

Shah M (2013) Solving the robot-world/hand-eye calibration problem using the Kronecker product. J Mech Robot 5(3):031007

66.

Tabb AL, Ahmad Yousef KM (2017) Solving the robot-world hand-eye(s) calibration problem with iterative methods. Mach Vis Appl 28(5-6):1–22

67.

Li A, Lin W, Wu D (2010) Simultaneous robot-world and hand-eye calibration using dual-quaternions and Kronecker product. Int J Phys Sci 5(10):1530–1536

68.

Strobl KH, Hirzinger G (2007) Optimal hand-eye calibration. IEEE/RSJ International Conference on Intelligent Robots & Systems: 4647-4653.

69.

Xu C, Liu Y, Jia M, Xiao Y, Cao J (2019) Hand-eye calibration method of wood-grabbing robot. J Agric Mach 050(012):420–426

70.

Zhao Z (2019) Simultaneous robot-world and hand-eye calibration by the alternative linear programming. Pattern Recogn Lett 127:174–180

71.

Zhi X, Schwertfeger S (2017) Simultaneous hand-eye calibration and reconstruction. IEEE/RSJ International Conference on Intelligent Robots & Systems 2017:1470–1477

72.

Ali I, Suominen O, Gotchev A, Morales ER (2019) Methods for simultaneous robot-world-hand–eye calibration: a comparative study. Sensors 19(12):2837–2853. https://doi.org/10.3390/s19122837CrossRef

73.

Tian P, Yang S, Wu Z, Li Z, Hu P, Qu X (2020) An optimal hand-eye calibration method for robots based on precision compensation. J Xi'an Jiaotong Univ 54(8):99–106

74.

Wang G, Li WL, Jiang C, Zhu DH, Ding H (2021) Simultaneous calibration of multicoordinates for a dual-robot system by solving the AXB = YCZ problem. IEEE Trans Robot:1–14

75.

Yan SJ, Ong SK, Nee A (2016) Registration of a hybrid robot using the Degradation-Kronecker method and a purely nonlinear method. Robotica 1(12):1–12

76.

Wu L, Wang J, Qi L, Ren H, Meng M (2016) Simultaneous hand–eye, tool–flange, and robot–robot calibration for comanipulation by solving the problem. IEEE Trans Robot 32(2):413–428

77.

Ma Q, Goh Z, Chirikjian G S. Probabilistic approaches to the AXB = YCZ calibration problem in multi-robot systems. Robot Sci Syst: 1-9. 10.15607/RSS.2016.XII.014

Titel: An overview of hand-eye calibration
verfasst von: Jianfeng Jiang
Xiao Luo
Qingsheng Luo
Lijun Qiao
Minghao Li
Publikationsdatum: 19.11.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-08233-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Design and analysis of compound structures integrated with bio-based phase change materials and lattices obtained through additive manufacturing

Multi-objective optimization of binder jet additive manufacturing of Co-Cr-Mo using machine learning

Static and dynamic flexural behaviour of printed polylactic acid with thermal annealing: parametric optimisation and empirical modelling

Experimental investigation on granite cutting by means of diamond frame saw

Localized heat treatment to improve the formability of steel pipes for hydraulic applications: process design and mechanical characterization

Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components

Premium Partner

Marktübersichten