nach oben

Russian Journal of Nondestructive Testing

Erschienen in:

01.03.2021 | ACOUSTIC METHODS

Analyzing Ultrasonic Signal Parameters during High-Speed Rail Inspection

verfasst von: A. A. Markov, E. A. Maximova

Erschienen in: Russian Journal of Nondestructive Testing | Ausgabe 3/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract—

The results of investigating the parameters of ultrasonic signals when increasing rail testing speed presented. Signals from rail bolt holes were selected as test reflectors. It is shown that the holes closest to rail joints are not sounded fully, and signals due to them cannot be used as test reflectors. For a full assessment of the deterioration of the quality of nondestructive testing of rails with an increase in the scanning speed, it is proposed to use the integral indicator of the reflector being analyzed. A noticeable decrease in this indicator at high speeds requires a compromise decision when choosing between performance and quality of rail inspection. The proposed technique can be used to assess the efficiency of operating and newly created flaw detection systems. The necessity of improving the methods of sounding the first bolt holes of the joints and adjusting the normative documents in relation to high-speed control of rails is substantiated.

Nächster Artikel Indirect Evaluation of the Compressive Strength of Recycled Aggregate Concrete at Long Ages and after Exposure to Freezing or Elevated Temperatures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

In the track industry the bolt holes are conventionally always counted from the end of the rail.

Thomas, H-M., Heckel, T., and Hanspach, G., Advantage of a combined ultrasonic and eddy current examination for railway inspection trains, Insight, 2007, no. 49(6), pp. 341–344.

Markov, A.A., Peculiarities of estimation of conditional sizes of defects at significant scanning speeds, Defektoskopiya, 1989, No. 3, pp. 8–11.

Orjelik, V., Aharoni, R., and Krug, G., Comparative data analysis for optimal high-speed railways testing, 8th Eur. Conf. NDT (ECNDT 2002), Barcelona, 2002.

Tarabrin, V.F., Implementation of high-speed complex diagnostics of railway infrastructure, Evraziya Vesti, 2018, no. 9, pp. 5–6.

Luzhin, S.V., Luzhin, V.S., and Bondarenko, A.A., Increasing the efficiency of track management, Put’ Putevoe Khoz., 2017, no. 4, pp. 34–37.

Markov, A.A. and Kuznetsova, E.A., Defektoskopiya rel’sov. Formirovanie i analiz signalov. Kn. 2. Rasshifrovka defektogramm (Defectoscopy of Rails. Formation and Analysis of Signals. Book 2: Interpretation of Defectograms), St. Petersburg: Ul’tra Print, 2014.

Volkov, I. Yu. and A.A., Zverev, Operating experience of the AVIKON-03M flaw detector car, Put’ Putevoe Khoz., 2019, no. 8, pp. 7–10.

Papaelias, M., Roberts, C., and Davis, C., A review on non-destructive evaluation of rails: State-of-the-art and future development, Proc. Inst. Mech. Eng., Part F, 2008, vol. 222, no. 4, pp. 367–384.

Markov, A.A., Maksimova, E.A., and Antipov, A.G., analyzing the development of rail defects based on results of multichannel periodic testing, Russ. J. Nondestr. Test., 2019, vol. 55, no. 12, pp. 875–886.CrossRef

10.

Mosyagin, V.V., Vasil’ev, S.A., and Makhovikov, S.P., RF patent no. 2715885, 2020.

11.

Tarabrin, V.F., Yurchenko E.V., Anisimov V.V., and etc., RF patent no. 2440568, 2012.

12.

Tarabrin, V.F., Chistyakova, O.E., Kislyakovsky, O.N., and Kononov, D.A., Automatic adjustment of the sensitivity of the flaw detector channels using an adaptive threshold, V Mire Nerazrush. Kontrolya, 2016, vol. 19, no. 3, pp. 77–80.

13.

Tarabrin, V.F., Odynets, S.A., Chistyakova, O.E., and etc., RF patent no. 2662464, 2018.

14.

Antipov, A.G. and Markov, A.A., 3D simulation and experiment on high speed rail MFL inspection, NDT & E Int., 2018, vol. 98, no. 9, pp. 177–185.CrossRef

15.

Antipov, A.G. and Markov, A.A., Detectability of rail defects by magnetic flux leakage method, Russ. J. Nondestr. Test., 2019, vol. 55, no. 4, pp. 277–285.CrossRef

16.

Markov, A.A. and Maksimova, E.A., Analysis of the effectiveness of ultrasonic and magnetic channels of flaw detection systems for rail monitoring, Vestn. Kalashnikov Izhevsk State Tech. Univ., 2019, vol. 22, no. 2, pp. 22–32.

17.

Markov, A.A., Zakharova, O.F., and Mosyagin, V.V., The use of a sweep of the “B” type for detecting cracks in the area of holes of bolted joints of railway rails, Defektoskopiya, 1999, no. 6, pp. 78–92.

18.

Markov, A.A. and Garaeva, V.S., On acoustic contact in the zone of bolted joints, Put’ Putevoe Khoz., 2008, no. 12, pp. 15–17.

19.

Markov, A.A. and Oleinik, V.E., Ultrasonic testing of critical objects using wheel transducers with elastic protectors, MEGATECH, 2012, no. 4, pp. 18–23.

20.

Markov, A.A., Foreign rail testing systems: foreign technology, Put’ Putevoe Khoz., 2010, no. 9, pp. 32–40.

21.

Tarabrin, V.F., Comparison of characteristics of search systems of mobile means of rail defectoscopy, Kontrol’ Diagn., 2020, vol. 23, no. 10, pp. 40–48.

22.

Molotkov, S.L., Mosyagin, V.V., Markov, A.A., and Ivanov, G.A., Application of longitudinal waves with angled input of ultrasonic vibrations to improve the efficiency of rail defectoscopy, Tezisy XXII Vseross. konf. po NK i TD (Abstr. XXII All-Russian Conf. NDT TD) (Moscow, March 3–5, 2020).

Titel: Analyzing Ultrasonic Signal Parameters during High-Speed Rail Inspection
verfasst von: A. A. Markov
E. A. Maximova
Publikationsdatum: 01.03.2021
Verlag: Pleiades Publishing
Erschienen in: Russian Journal of Nondestructive Testing / Ausgabe 3/2021
Print ISSN: 1061-8309
Elektronische ISSN: 1608-3385
DOI: https://doi.org/10.1134/S1061830921030037

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract—

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2021

Indirect Evaluation of the Compressive Strength of Recycled Aggregate Concrete at Long Ages and after Exposure to Freezing or Elevated Temperatures

Calculation Model of X-Ray Computed Tomography with Density Assessment Function

Automated System for Complex Non-Destructive Testing of the Structure and Mechanical Properties of Mechanical Engineering Materials

Algorithms for Modeling the Formation and Processing of Information in X-Ray Tomography of Foam Materials

Effect of Grinding Environments on Magnetic Response of AISI D2 Tool Steel

Premium Partner

Marktübersichten