nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Application of EDAS Method for Best Dressing Mode for Internal Cylindrical Grinding

verfasst von : Trieu Quy Huy, Nguyen Hong Linh, Tra n Huu Danh, Bui Thanh Danh, Do Thi Tam, Luu Anh Tung, Le Xuan Hung

Erschienen in: Advances in Engineering Research and Application

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The results of a study on determining the best input process parameters for dressing process in internal grinding SKD11 tool steel to achieve minimal surface roughness (RS) and maximum wheel life (T) all at the same time are presented in this paper. To accomplish this, the EDAS (Evaluation based on Distance from Average Solution) method was applied to solve the multi-criteria decision-making (MCDM) problem. Besides, the Entropy method was used to calculate the weights of the criteria. In addition, six input parameters were tested: coarse dressing depth, coarse dressing passes, fine dressing depth, fine dressing passes, non-feeding dressing, and dressing feed rate. The Taguchi method and an L16 orthogonal array were used to design this experiment. The best dressing mode for internal cylindrical grinding has been proposed based on the findings of the study.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Anti-torque Controller Using Sliding Mode Linear Quadratic Regulator Applied for Coaxial BLDC Motor

Nächstes Kapitel Application of MARCOS Method for Selecting the Best Schema of Scissors Mechanism

Zavadskas, E.K., Turskis, Z.: Multiple criteria decision making (MCDM) methods in economics: an overview. Technol. Econ. Dev. Econ. 17(2), 397–427 (2011)CrossRef

Balezentis, T., et al.: Optimizing crop mix with respect to economic and environmental constraints: An integrated MCDM approach. Sci. Total Environ. 705, 135896 (2020)CrossRef

Ejegwa, P.A.: Generalized triparametric correlation coefficient for Pythagorean fuzzy sets with application to MCDM problems. Granul. Comput. 6(3), 557–566 (2020). https://doi.org/10.1007/s41066-020-00215-5CrossRef

Wen, Z., et al.: Cold chain logistics management of medicine with an integrated multi-criteria decision-making method. Int. J. Environ. Res. Public Health 16(23), 4843 (2019)CrossRef

YILMAZ, B.Ö., H. TOZAN, and M.A. KARADAYI, Multi-Criteria decision making (MCDM) applications in military healthcare field. J. Health Syst. Policies, 2020. 2(2): p. 149–181

Sánchez-Lozano, J., Rodríguez, O.N.: Application of Fuzzy Reference Ideal Method (FRIM) to the military advanced training aircraft selection. Appl. Soft Comput. 88, 106061 (2020)CrossRef

Kumar, A., et al.: A review of multi criteria decision making (MCDM) towards sustainable renewable energy development. Renew. Sustain. Energy Rev. 69, 596–609 (2017)CrossRef

Hung, K.-C., et al.: A decision support system for engineering design based on an enhanced fuzzy MCDM approach. Expert Syst. Appl. 37(1), 202–213 (2010)CrossRef

Do, D.T.: Multi-criteria decision making under the MARCOS method and the weighting methods: applied to milling, grinding and turning processes. Manuf. Rev., 9 (2022)

10.

Trung, D.D., Thinh, H.: A multi-criteria decision-making in turning process using the MAIRCA, EAMR, MARCOS and TOPSIS methods: A comparative study. Adv. Prod. Eng. & Manag. 16(4), 443–456 (2021)

11.

Do, D.T., A combination method for multi-criteria decision making problem in turning process. Manuf. Rev., 8 (2021)

12.

Trung, D.D.: Application of TOPSIS and PIV methods for multi-criteria decision making in hard turning process. J. Mach. Eng., 21 2021

13.

Divya, C., Raju, L.S., Singaravel, B.: Application of MCDM methods for process parameter optimization in turning process—a review. Recent trends in mechanical engineering, p. 199–207 (2021)

14.

Vats, P., et al.: Optimization of machining parameters in turning of AISI 1040 steel using hybrid MCDM technique. Materials Today: Proceedings 50, 1758–1765 (2022)

15.

Çalışkan, H., et al.: Material selection for the tool holder working under hard milling conditions using different multi criteria decision making methods. Mater. Des. 45, 473–479 (2013)CrossRef

16.

Nguyen, V., Nguyen, T., Tien, D.: Cutting parameter optimization in finishing milling of Ti-6Al-4V titanium alloy under MQL condition using TOPSIS and ANOVA analysis. Eng., Technol. & Appl. Sci. Res. 11(1), 6775–6780 (2021)CrossRef

17.

Nguyen, H.-Q., et al.: A Comparative study on multi-criteria decision-making in dressing process for internal grinding. Machines 10(5), 303 (2022)CrossRef

18.

Nguyen, H.-Q., et al.: Multi-Criteria decision making in the PMEDM process by using MARCOS, TOPSIS, and MAIRCA methods. Appl. Sci. 12(8), 3720 (2022)CrossRef

19.

Alinezhad, A., New methods and applications in multiple attribute decision making (MADM). Springer (2019)

20.

Hieu, T.T., Thao, N.X., Thuy, L.: Application of MOORA and COPRAS models to select materials for mushroom cultivation. Vietnam. J. Agric. Sci. 17(4), 32–2331 (2019)

Titel: Application of EDAS Method for Best Dressing Mode for Internal Cylindrical Grinding
verfasst von: Trieu Quy Huy
Nguyen Hong Linh
Tra n Huu Danh
Bui Thanh Danh
Do Thi Tam
Luu Anh Tung
Le Xuan Hung
Verlag: Springer International Publishing
Buch: Advances in Engineering Research and Application
Print ISBN: 978-3-031-22199-6

Electronic ISBN: 978-3-031-22200-9

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-22200-9_24

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht