nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Application of TOPSIS Method to Determine Best Alternative in Wire-EDM 90CrSi Tool Steel

verfasst von : Trieu Quy Huy, Le Hong Ky, Le Hoang Anh, Bui Thanh Danh, Nguyen Manh Cuong, Nguyen Thanh Tu

Erschienen in: Advances in Engineering Research and Application

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The goal of this research is to find the best process input parameters in wire-electrical discharge machining (wire-EDM) when processing 90CrSi tool steel. The TOPSIS method was used as a tool in this study to solve the MCDM problem. Furthermore, the MEREC method is employed to compute the weights on the output parameters of the experiment result. According to the results of this work, experiment No. 19 is the best experimental setup, with the following input parameters: the cutting voltage VM = 9 (V), the pulse on time T_on = 12 (s), the pulse off time T_off = 18 (s), the servo voltage SV = 35 (V), the wire feed WF = 8 (mm/min), and the feed speed SPD = 4.5 (mm/min).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Application of MCDM Method in Selection of Schema for Optimal Design of Double Scissor Lift Tables

Nächstes Kapitel Application of WASPAS Method for Determining Best Process Factors in External Grinding

Trung, D.D., Thinh, H.: A multi-criteria decision-making in turning process using the MAIRCA, EAMR, MARCOS and TOPSIS methods: a comparative study. Adv. Prod. Eng. Manag. 16(4), 443–456 (2021)

Do, D.T.: A combination method for multi-criteria decision making problem in turning process. Manuf. Rev. 8 (2021)

Do, D.T.: Multi-criteria decision making under the MARCOS method and the weighting methods: applied to milling, grinding and turning processes. Manuf. Rev. 9 (2022)

Singh, A., et al.: TOPSIS based selection of optimal end milling process parameters. In: AIP Conference Proceedings. AIP Publishing LLC (2020)

Nguyen, H.-Q., et al.: A comparative study on multi-criteria decision-making in dressing process for internal grinding. Machines 10(5), 303 (2022)CrossRef

Huu Phan, N., Muthuramalingam, T.: Multi criteria decision making of vibration assisted EDM process parameters on machining silicon steel using Taguchi-DEAR methodology. Silicon 13(6), 1879–1885 (2021)

Majumder, H., Maity, K.: Prediction and optimization of surface roughness and micro-hardness using GRNN and MOORA-fuzzy-a MCDM approach for nitinol in WEDM. Measurement 118, 1–13 (2018)CrossRef

Sreeraj, P., et al.: Application of MCDM based hybrid optimization of WEDM process parameters. Mater. Today: Proc. 50, 1186–1192 (2022)

Jaiswal, A., et al.: Multi response optimization of wire EDM process parameters. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing (2018)

10.

Patel, J.D., Maniya, K.D.: Optimization of WEDM process parameters for aluminium metal matrix material Al+ SiC Using MCDM Methods. In: Advances in Manufacturing Processes, pp. 59–70. Springer (2021)CrossRef

11.

Bavche, A.L., Valekar, M., Padaseti, B.K.: Application of MOORA to optimize WEDM process parameters: a multi-criteria decision making approach. In: ICRRM 2019–System Reliability, Quality Control, Safety, Maintenance and Management: Applications to Civil, Mechanical and Chemical Engineering, p. 73 (2019)

12.

Huo, J., et al.: Influence of process factors on surface measures on electrical discharge machined stainless steel using TOPSIS. Mater. Res. Exp. 6(8), 086507 (2019)CrossRef

13.

Huu Phan, N., Muthuramalingam, T.: Multi-criteria decision-making of vibration-aided machining for high silicon-carbon tool steel with Taguchi–topsis approach. Silicon 13(8), 2771–2783 (2021)

14.

Nguyen, H.-Q., et al.: Multi-criteria decision making in the PMEDM process by using MARCOS, TOPSIS, and MAIRCA methods. Appl. Sci. 12(8), 3720 (2022)CrossRef

15.

Hwang, C.-L., Lai, Y.-J., Liu, T.-Y.: A new approach for multiple objective decision making. Comput. Oper. Res. 20(8), 889–899 (1993)CrossRefMATH

16.

Keshavarz-Ghorabaee, M.: Assessment of distribution center locations using a multi-expert subjective–objective decision-making approach. Sci. Rep. 11(1), 1–19 (2021)CrossRef

Titel: Application of TOPSIS Method to Determine Best Alternative in Wire-EDM 90CrSi Tool Steel
verfasst von: Trieu Quy Huy
Le Hong Ky
Le Hoang Anh
Bui Thanh Danh
Nguyen Manh Cuong
Nguyen Thanh Tu
Verlag: Springer International Publishing
Buch: Advances in Engineering Research and Application
Print ISBN: 978-3-031-22199-6

Electronic ISBN: 978-3-031-22200-9

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-22200-9_27

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht