nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

5. Applications of Eddy Resolving Methods

verfasst von : P. G. Tucker

Erschienen in: Unsteady Computational Fluid Dynamics in Aeronautics

Verlag: Springer Netherlands

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The application of eddy resolving methods to a wide range of propulsive and airframe systems is reviewed. For propulsive systems the following areas are addressed: turbines, compressors, fans, internal air systems, turbine blade cooling and combustors. For airframes the following zones are looked at: airfoil and trailing edges flows, multi-component airfoils, swept and delta wings, full aircraft configurations, base flows, landing gear, cavity and other miscellaneous flows. The frequency of use for the different turbulence modelling techniques described in Chap. 3 is outlined. As might be expected, hybrid RANS-LES methods find much greater use for airframes. The grid densities used are contrasted with expected theoretically based estimates discussed in Chaps. 1 and 3. For propulsion system studies, simulations are found to be generally under resolved. Notably, for all of the above, levels of validation are defined. It is found that there is a lack of detailed validation data to explore in depth the performance of LES and thus refine it. This is especially so for turbomachinery. The need for LES best practices is again discussed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Computational Aerodynamics Methods

Nächstes Kapitel Computational Aeroacoustics

S. Acharya, S. Dutta, T.A. Myrum, R.S. Baker, Periodically developed flow and heat transfer in a ribbed duct. Int. J. Heat Mass Transf. 36(8), 2069–2082 (1993) CrossRef

D. Ahlman, G. Brethouwer, A.V. Johansson, Direct numerical simulation of a plane turbulent wall-jet including scalar mixing. Phys. Fluids 19(6), 065102 (2007) CrossRef

R. Allen, F. Mendonca, D. Kirkham, RANS and DES turbulence model predictions of noise on the M219 cavity at M=0.85. Int. J. Aeroacoust. 4(1), 135–152 (2005) CrossRef

H.I. Andersson, M. Lygren, LES of open rotor-stator flow. Int. J. Heat Fluid Flow 27(4), 551–557 (2006) CrossRef

A. Arnott, G. Schneider, K.P. Neitzke, J. Agocs, A. Schröder, B. Sammler, J. Kompenhans, Detailed characterisation, using piv, of flow around an airfoil in high-lift configuration, in Particle Image Velocimetry: Recent Improvements Proceedings of the EUROPIV, vol. 2 (2003)

L.U. Axelsson, W.K. George, Spectral analysis of the flow in an intermediate turbine duct, in Proc. of ASME Turbo Expo 2008, Berlin, Germany, 9–13 June 2008. ASME Paper Number GT2008–51340

Y.S. Baik, J.M. Rausch, L.P. Bernal, M.V. Ol, Experimental investigation of pitching and plunging airfoils at Reynolds. number between 1×10⁴ and 6×10⁴. AIAA Paper Number AIAA–2009–4030 (2009)

G.R. Baker, S.J. Barker, K.K. Bofah, P.G. Saffman, Laser anemometer measurements of trailing vortices in water. J. Fluid Mech. 65(2), 325–336 (1974) CrossRef

W. Balzer, H.F. Fasel, Direct numerical simulations of laminar separation bubbles on a curved plate: Part 1—simulation setup and uncontrolled flow, in Proc. of ASME Turbo Expo, San Antonio, Texas, USA, 3–7 June 2013a. ASME Paper Number GT2013–95277

W. Balzer, H.F. Fasel, Direct numerical simulations of laminar separation bubbles on a curved plate: Part 2—flow control using pulsed vortex generator jets, in Proc. of ASME Turbo Expo, San Antonio, Texas, USA, 3–7 June 2013b. ASME Paper Number GT2013–95278

R.S. Barlow, J.H. Frank, Effects of turbulence on species mass fractions in methane/air jet flames, in Symposium (International) on Combustion, vol. 27 (1998), pp. 1087–1095

J.W. Baughn, X.J. Yan, M. Mesbah, The effect of Reynolds number on the heat transfer distribution from a flat plate to a turbulent impinging jet, in Proc. of ASME Winter Annual Meeting 1992, ASME HTD-vol. 226 (1992), pp. 1–7

R.A. Baurle, C.J. Tam, J.R. Edwards, H.A. Hassan, Hybrid simulation approach for cavity flows: blending, algorithm, and boundary treatment issues. AIAA J. 41(8), 1463–1480 (2003) CrossRef

N.J. Bisek, D.P. Rizzetta, J. Poggie, Plasma control of a turbulent shock boundary-layer, interaction. AIAA J. (2013). doi:10.2514/1.J052248

W.K. Blake, A statistical description of pressure and velocity fields at the trailing edges of a flat strut. Technical Report, David Taylor Naval Ship Research and Development Center, Rept. 4241, Bethesda, MD (1975)

W.K. Blake, J.L. Gershfeld, The aeroacoustics of trailing edges. Front. Exp. Fluid. Mech. 1, 457–532 (1989) CrossRef

D.J. Bodony, S.K. Lele, Review of the current status of jet noise predictions using large-eddy simulation (invited), in 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA (2006). AIAA Paper Number AIAA–2006–0468

D.J. Bodony, S.K. Leley, Jet noise prediction of cold and hot subsonic jets using large-eddy simulation, in 10th AIAA/CEAS Aeroacoustics Conference (2004). AIAA Paper Number AIAA–2004–3022

D.E. Bohn, A. Decker, H. Ma, M. Wolff, Influence of sealing air mass flow on the velocity distribution in and inside the rim seal of the upstream cavity of a 1.5-stage turbine, in Proc. of ASME Turbo Expo 2003, Atlanta, Georgia, USA, 16–19 June 2003. ASME Paper Number GT2003–38459

D.E. Bohn, A. Decker, N. Ohlendorf, R. Jakoby, Influence of an axial and radial rim seal geometry on hot gas ingestion into the upstream cavity of a 1.5-stage turbine, in Proc. of ASME Turbo Expo 2006, Barcelona, Spain, 8–11 May 2006. ASME Paper Number GT2006–90454

G. Boudier, L.Y.M. Gicquel, T. Poinsot, D. Bissieres, C. Bérat, Comparison of LES, RANS and experiments in an aeronautical gas turbine combustion chamber. Proc. Combust. Inst. 31(2), 3075–3082 (2007) CrossRef

C.J. Bourdon, J.C. Dutton, Planar visualizations of large-scale turbulent structures in axisymmetric supersonic separated flows. Phys. Fluids 11, 201–213 (1999) MATHCrossRef

C.J. Bourdon, J.C. Dutton, Shear layer flapping and interface convolution in a separated supersonic flow. AIAA J. 38(10), 1907–1915 (2000) CrossRef

C.J. Bourdon, J.C. Dutton, Effects of boattailing on the turbulence structure of a compressible base flow. J. Spacecr. Rockets 38, 534–541 (2001) CrossRef

P. Bradshaw, M.T. Gee, Turbulent wall jets with and without an external stream. Aeronaut. Res. Counc. R & M 3252 (1960)

C. Breitsamter, Turbulente Strömungsstrukturen an Flugzeugkonfigurationen mit Vorderkantenwirbeln. PhD thesis, Technical University, Munich, January 1997

J. Bridges, C.A. Brown, Parametric testing of chevrons on single flow hot jets, in 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, May 2004. AIAA Paper Number AIAA–2004–2824

J. Bridges, C.A. Brown, Validation of the small hot jet acoustic rig for aeroacoustic research, in 11th AIAA Aeroacoustics Conference, Monterey, California, 23–25 May 2005. AIAA Paper Number AIAA–2005–0363

J. Bridges, M.P. Wernet, Measurements of the aeroacoustic sound source in hot jets. Technical Report NASA–TM–221508, NASA Glenn Research Centre (2004)

J. Bridges, M.P. Wernet, Effect of temperature on jet velocity spectra, in 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference), Rome, Italy, 21–23 May 2007. AIAA Paper Number AIAA–2007–3628

K.M. Britchford, A.P. Manners, J.J. McGuirk, S.J. Stevens, Measurement and prediction of low in annular s-shaped ducts. Exp. Therm. Fluid Sci. 9(2), 197–205 (1994) CrossRef

V. Brunet, S. Deck, Zonal-detached eddy simulation of transonic buffet on a civil aircraft type configuration. AIAA Paper Number AIAA–2008–4152 (2008)

R.K. Byskov, Large eddy simulation of flow structures in a centrifugal pump impeller. PhD thesis, Aalborg University, Denmark (2000)

P.M. Cannon, G.S. Elliott, J.C. Dutton, Time-series axisymmetric base-pressure measurements with simultaneous near-wake visualizations. AIAA Paper Number AIAA–2005–5285 (2005)

N. Ceresola, TU Munich, delta wing, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

N. Chauvet, S. Deck, L. Jacquin, Zonal detached eddy simulation of a controlled propulsive jet. AIAA J. 45(10), 2458–2473 (2007) CrossRef

J.S. Chow, G.G. Zilliac, P. Bradshaw, Mean and turbulence measurements in the near field of a wingtip vortex. AIAA J. 35(10), 1561–1567 (1997a) CrossRef

J. Chow, G. Zilliac, P. Bradshaw, Turbulence measurements in the near field of a wingtip vortex. Technical Report NASA–TM–110418, NASA (1997b)

D. Coles, A.J. Wadcock, Flying-hot-wire study of flow past an naca 4412 airfoil at maximum lift. AIAA J. 17(4), 321–329 (1979) CrossRef

Y. Colin, B. Aupoix, J. Boussuge, P. Chanez, Numerical simulation of the distortion generated by crosswind inlet flows, in Proceedings of the 18th ISABE Conference, Beijing, China (2007). Paper Number ISABE–2007–1210

S. Connell, M. Braaten, L. Zori, R. Steed, B. Hutchinson, G. Cox, A comparison of advanced numerical techniques to model transient flow in turbomachinery blade rows, in Proc. of ASME Turbo Expo 2011, Vancouver, BC, Canada, 6–11 June 2011. ASME Paper Number GT2011–45820

S. Connell, B. Hutchinson, P. Galpin, R. Campregher, P. Godin, The efficient computation of transient flow in turbine blade rows using transformation methods, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012. ASME Paper Number GT2012–69019

D. Cooper, D.C. Jackson, B.E. Launder, G.X. Liao, Impinging jet studies for turbulence model assessment—I. Flow-field experiments. Int. J. Heat Mass Transf. 36(10), 2675–2684 (1993) CrossRef

J.D. Coull, Wake induced transition in low pressure turbines. PhD thesis, Engineering Department, Cambridge University (2009)

R.M. Cummings, S.A. Morton, J.R. Forsythe, Detached-Eddy simulation of slat and flap aerodynamics for a high-lift wing, in 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, 5–8 January 2004. AIAA Paper Number AIAA–2004–1233

J. Dacles-Mariani, G.G. Zilliac, J.S. Chow, P. Bradshaw, Numerical/experimental study of a wingtip vortex in the near field. AIAA J. 33(9) (1995)

S. Dahlström, L. Davidson, Large eddy simulation of the flow around an airfoil. AIAA Paper Number AIAA–2001–0425 (2001)

J.W. Daily, R.E. Nece, Chamber dimension effects on induced flow and frictional resistance of enclosed rotating disks. J. Basic Eng. 82, 217–232 (1960) CrossRef

B.B. Dally, A.R. Masri, R.S. Barlow, G.J. Fiechtner, Instantaneous and mean compositional structure of bluff-body stabilized nonpremixed flames. Combust. Flame 114(1–2), 119–148 (1998) CrossRef

M.J.C. de Henshaw, M2129 cavity case: verification and validation data for computational unsteady aerodynamics. Technical Report RTO–TR–26, AC/323(AVT)TP/19, QinetiQ, UK, pp. 453–472 (2002)

C.C. De Wiart, K. Hillewaert, P. Geuzaine, DNS of a low pressure turbine blade computed with the discontinuous Galerkin method, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012

J.R. DeBonis, Progress toward large-eddy simulations for prediction of realistic nozzle systems, in 44th AIAA Aerospace Sciences Meeting and Exhibit (2006). AIAA Paper Number AIAA–2006–487

J.R. Debonis, J.N. Scot, Large-eddy simulation of a turbulent compressible round jet. AIAA J. 40(7), 1346–1354 (2002) CrossRef

S. Deck, Numerical simulation of transonic buffet over a supercritical airfoil. AIAA J. 43(7), 1556–1566 (2005a) CrossRef

S. Deck, Zonal-Detached-Eddy simulation of the flow around a high-lift configuration. AIAA J. 43(11), 2372–2384 (2005b) CrossRef

S. Deck, Delayed detached eddy simulation of the end-effect regime and side-loads in an overexpanded nozzle flow. Shock Waves 19(3), 239–249 (2009a) MATHCrossRef

S. Deck, TU Munich, three element airfoil, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009b)

S. Deck, P. Thorigny, Unsteadiness of an axisymmetric separating-reattaching flow: numerical investigation. Phys. Fluids 19, 65–103 (2007) CrossRef

J. Denecke, K. Dullenkopf, S. Wittig, H.J. Bauer, Experimental investigation of the total temperature increase and swirl development in rotating labyrinth seals, in Proc. of ASME Turbo Expo 2005 (2005). ASME Paper Number GT2005–47268

W. Devenport, R. Simpson, Time-dependent and time-averaged turbulence structure near the nose of a wing-body junction. J. Fluid Mech. 210(1), 23–55 (1990) CrossRef

W.J. Devenport, M.C. Rife, S.I. Liapis, G.J. Follin, The structure and development of a wing-tip vortex. J. Fluid Mech. 312, 67–106 (1996) MathSciNetCrossRef

G. Dufour, N. Gourdain, F. Duchaine, O. Vermorel, L.Y.M. Gicquel, J.F. Boussuge, T. Poinsot, Large Eddy Simulation Applications. VKI Lecture Series Numerical Investigations in Turbomachinery: the State of the Art (2009)

K. Duraisamy, S.K. Lele, Evolution of isolated turbulent trailing vortices. Phys. Fluids 20, 035102 (2008) CrossRef

P.A. Durbin, Separated flow computations with the k–ϵ–v-squared model. AIAA J. 33(4) (1995)

S.J. Eastwood, P.G. Tucker, H. Xia, P. Carpenter, P. Dunkley, Hybrid LES computations and measurements of a small scale high speed coflowing jet. AIAA J. 48(5), 963–974 (2010) CrossRef

Y. Elazar, R.P. Shreeve, Viscous flow in a controlled diffusion compressor cascade with increasing incidence. J. Turbomach. 112(2), 256–266 (1990) CrossRef

J.G. Eriksson, R.I. Karlsson, J. Persson, An experimental study of a two-dimensional plane turbulent wall jet. Exp. Fluids 25(1), 50–60 (1998) CrossRef

P.R. Farthing, C.A. Long, J.M. Owen, J.R. Pincombe, Rotating cavity with axial throughflow of cooling air: flow structure. J. Turbomach. 114(1), 237–246 (1992a) CrossRef

P.R. Farthing, C.A. Long, J.M. Owen, J.R. Pincombe, Rotating cavity with axial throughflow of cooling air-heat transfer. J. Turbomach. 114(1), 229 (1992b) CrossRef

M. Fenot, Etude du refroidissement par impact de jets. Application aux aubes de turbines. PhD thesis, Universite de Poitiers, Portiers, France (2004)

N. Forestier, L. Jacquin, P. Geffroy, The mixing layer over a deep cavity at high-subsonic speed. J. Fluid Mech. 475(1), 101–145 (2003) MATH

J.R. Forsythe, K.A. Hoffmann, R.M. Cummings, K.D. Squires, Detached-eddy simulation with compressibility corrections applied to a supersonic axisymmetric base flow. J. Fluids Eng. 124(4), 911–923 (2002) CrossRef

J.R. Forsythe, K.D. Squires, K.E. Wurtzler, P.R. Spalart, Detached-eddy simulation of the f–15E at high alpha. J. Aircr. 41(2), 193–200 (2004) CrossRef

S. Fu, Z. Xiao, H. Chen, Y. Zhang, J. Huang, Simulation of wing-body junction flows with hybrid RANS/LES methods. Int. J. Heat Fluid Flow 28(6), 1379–1390 (2007) CrossRef

S. Fujimoto, Large eddy simulation of film cooling flows using octree hexahedral meshes, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012. ASME Paper Number GT2012–70090

C. Fureby, Large eddy simulation modelling of combustion for propulsion applications. Philos. Trans. R. Soc. A, Math. Phys. Eng. Sci. 367(1899), 2957–2969 (2009) MATHCrossRef

C. Fureby, Y. Nilsson, K. Andersson, Large eddy simulation of supersonic base flow. AIAA Paper Number AIAA–99–0426 (1999)

C. Fureby, N. Alin, N. Wikström, S. Menon, N. Svanstedt, L. Persson, D. Knight, R. Friedrich, W. Rodi, M. Lesieur et al., Large eddy simulation of high Reynolds number wall bounded flows. AIAA J. 42(3), 457–468 (2004) CrossRef

A.J.M. Gamal, J.M. Vance, Labyrinth seal leakage tests: tooth profile, tooth thickness, and eccentricity effects. J. Eng. Gas Turbines Power 130(1), 012510 (2008) CrossRef

F. Gand, Zonal detached eddy simulation of a civil aircraft with a deflected spoiler. AIAA J. 1–11 (2012)

U. Ganz, S.A.L. Dlegg, P. Joppa, Measurement and prediction of broadband fan noise. AIAA Paper Number AIAA–98–2316 (1998a)

U.W. Ganz, P.D. Joppa, T.J. Patten, D.F. Scharpf, Boeing 18–inch fan rig broadband noise test. Technical Report NASA–CR–1998–208704, NASA (1998b)

A. Garbaruk, M. Shur, M. Strelets, A. Travin, NACA0021 at 60 degrees incidence, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009a)

A. Garbaruk, M. Shur, M. Strelets, A. Travin, Supersonic base flow, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009b)

A. Garcia-Sagrado, Boundary layer and trailing edge noise sources. PhD thesis, Engineering Department, Cambridge University (2007)

A. Garcia-Sagrado, T. Hynes, Wall-pressure sources near an airfoil trailing edge under separated laminar boundary layers. AIAA J. 49(9), 1841–1856 (2011) CrossRef

B. Gardarin, L. Jacquin, P. Geffroy, Experimental studies on a rudimentary four wheel landing gear. AIAA Paper Number AIAA–2008–3773 (2008)

E. Garnier, S. Deck, Large-eddy simulation of transonic buffet over a supercritical airfoil. ERCOFTAC Ser. (2008). doi:10.1007/978-90-481-3652-0_81

S. Gdadebo, Three dimensional separation in compressors. PhD thesis, Engineering Department, Cambridge University (2003)

L.F.G. Geers, M.J. Tummers, K. Hanjalić, Experimental investigation of impinging jet arrays. Exp. Fluids 36(6), 946–958 (2004) CrossRef

O. Gentilhomme, Turbine rim seal ingestion. PhD thesis, School of Engineering, University of Sussex (2004)

O. Gentilhomme, N.J. Hills, A.B. Turner, J.W. Chew, Measurement and analysis of ingestion through a turbine rim seal. J. Turbomach. 125, 505–512 (2010) CrossRef

B. Geurts, D. Holm, Leray and LANS—a modeling of turbulent mixing. J. Turbul. 7(10), 1–33 (2006) MathSciNet

M. Goodhand, Compressor leading edges. PhD thesis, Engineering Department, Cambridge University (2010)

M.N. Goodhand, R.J. Miller, Compressor leading edge spikes: a new performance criterion. J. Turbomach. 133(2), 021006 (2010) CrossRef

E. Göttlich, A. Marn, R. Pecnik, F.J. Malzacher, O. Schennach, H.P. Pirker, The influence of blade tip gap variation on the flow through an aggressive S-shaped intermediate turbine duct downstream a transonic turbine stage: Part II—time-resolved results and surface flow, in Proc. of GT2007 ASME Turbo Expo 2007, Montreal, Canada, 14–17 May 2007. ASME Paper Number GT2007–28069

N. Gourdain, L.Y.M. Gicquel, E. Collado, Comparison of RANS and LES for prediction of wall heat transfer in a highly loaded turbine guide vane. AIAA J. Propuls. Power 28(2) (2012)

S.M. Grace, W.G. Dewar, D.E. Wroblewski, Experimental investigation of the flow characteristics within a shallow wall cavity for both laminar and turbulent upstream boundary layers. Exp. Fluids 36(5), 791–804 (2004) CrossRef

S.I. Green, A.J. Acosta, Unsteady flow in trailing vortices. J. Fluid Mech. 227(1), 107–134 (1991) CrossRef

A. Hadjadj, Large-eddy simulation of shock/boundary-layer interaction. AIAA J. (2012, in press)

C. Hah, Large eddy simulation of transonic flow field in NASA rotor 37, in 47th AIAA Aerospace Sciences Meeting (2009). AIAA Paper Number AIAA–2009–1061

C. Hah, M. Voges, M. Mueller, H.P. Schiffer, Investigation of unsteady flow behaviour in transonic compressor rotors with LES and PIV measurements. ISABE. 2009 Paper No. Technical Report, ISABE–2009–02 (2009)

M. Hahn, D. Drikakis, Implicit large-eddy simulation of swept-wing flow using high-resolution methods. AIAA J. 47(3), 618–630 (2009) CrossRef

E.E. Halila, D.T. Lenahan, T.T. Thomas, Energy efficient engine high pressure turbine test hardware detailed design report. Technical Report NASA–CR–167955, NASA (1982)

C.A. Hall, T.P. Hynes, Measurements of intake separation hysteresis in a model fan and nacelle rig. J. Propuls. Power 22(4), 872–879 (2006) CrossRef

D.E. Halstead, D.C. Wisler, T.H. Okiishi, G.J. Walker, H.P. Hodson, H.W. Shin, Boundary layer development in axial compressors and turbines: Part 1 of 4—composite picture. J. Turbomach. 119(1), 114–127 (1997) CrossRef

A. Hamed, D. Basu, K. Das, Detached eddy simulations of supersonic flow over cavity. AIAA Paper Number AIAA–2003–0549 (2003)

J.C. Han, P.R. Chandra, S.C. Lau, Local heat/mass transfer distributions around sharp 180 deg turns in two-pass smooth and rib-roughened channels. ASME Trans. J. Heat Transf. 110, 91–98 (1988) CrossRef

M. Harper-Bourne, Some observations on the noise of heated jets, in 13th AIAA/CEAS Aeroacoustics Conf., Rome, Italy, 21–23 May 2007. AIAA Paper Number AIAA–2007–3632

L. He, Efficient computational model for nonaxisymmetric flow and heat transfer in rotating cavity. ASME J. Turbomach. 133, 021018 (2011) CrossRef

L.S. Hedges, A.K. Travin, P.R. Spalart, Detached-eddy simulations over a simplified landing gear. J. Fluids Eng. 124(2), 413–423 (2002) CrossRef

I. Helms, Effect of non-uniform inlet turbulence distributions on high-pressure turbine heat transfer. Master’s thesis, Oxford University (2011)

J.L. Herrin, J.C. Dutton, Supersonic base flow experiments in the near wake of a cylindrical afterbody. AIAA J. 32(1) (1994a)

J.L. Herrin, J.C. Dutton, Supersonic near-wake afterbody boattailing effects on axisymmetric bodies. J. Spacecr. Rockets 31(6), 1021–1028 (1994b) CrossRef

J.L. Herrin, J.C. Dutton, Effect of a rapid expansion on the development of compressible free shear layers. Phys. Fluids 7, 159–171 (1995) CrossRef

J.L. Herrin, J.C. Dutton, The turbulence structure of a reattaching axisymmetric compressible free shear layer. Phys. Fluids 9, 3502–3512 (1997) CrossRef

C.G. Himmel, Ultra-high lift blades for low pressure turbines. PhD thesis, Engineering Department, Cambridge University (2010)

G.V. Hobson, D.J. Hansen, D.G. Schnorenberg, D.V. Grove, Effect of Reynolds number on separation bubbles on compressor blades in cascade. J. Propuls. Power 17(1), 154–162 (2001) CrossRef

B.M. Holley, S. Becz, L.S. Langston, Measurement and calculation of turbine cascade endwall pressure and shear stress. J. Turbomach. 128(2), 232–239 (2006) CrossRef

D.S. Holloway, J.H. Leylek, F.A. Buck, Pressure-side bleed film cooling: Part I—steady framework for experimental and computational results, in Proc. of ASME Turbo Expo 2002 (2002a). ASME Paper Number GT2002–30471

D.S. Holloway, J.H. Leylek, F.A. Buck, Pressure-side bleed film cooling: Part II—unsteady framework for experimental and computational results, in Proc. of ASME Turbo Expo 2002 (2002b). ASME Paper Number GT2002–30472

R.J. Howell, Wake-separation bubble interactions in low Reynolds number turbomachinery. PhD thesis, Engineering Department, Cambridge University (1999)

M. Inagaki, T. Kondoh, Y. Nagano, A mixed-time-scale sgs model with fixed model-parameters for practical LES. Eng. Turbul. Model. Exp. 257–266 (2002)

I.V. Iourokina, S.K. Lele, Towards large eddy simulation of film-cooling flows on a model turbine blade leading edge, in 43rd Aerospace Sciences Exhibit (2005). AIAA Paper Number AIAA–2005–0670

M. Itoh, Experiments on the turbulent flow in the narrow clearance between a rotating and a stationary disk. Turbul. Flows 1995, 27–32 (1995)

M. Itoh, Y. Yamada, S. Imao, M. Gonda, Experiments on turbulent flow due to an enclosed rotating disk. Exp. Therm. Fluid Sci. 5(3), 359–368 (1992) CrossRef

M.C. Jacob, J. Boudet, D. Casalino, M. Michard, A rod-airfoil experiment as a benchmark for broadband noise modeling. Theor. Comput. Fluid Dyn. 19(3), 171–196 (2005) MATHCrossRef

L. Jacquin, P. Molton, S. Deck, B. Maury, D. Soulevant, An experimental study of shock oscillation over a transonic supercritical profile. AIAA Paper Number AIAA–2005–4902 (2005)

J.R. Janssen, J.C. Dutton, Time-series analysis of supersonic base-pressure fluctuations. AIAA J. 42(3), 605–613 (2004) CrossRef

R.J. Jefferson-Loveday, P.G. Tucker, LES of impingement heat transfer on a concave surface. Numer. Heat Transf., Part A, Appl. 58(4), 247–271 (2010) CrossRef

R.J. Jefferson-Loveday, P.G. Tucker, Wall-resolved LES and zonal LES of round jet impingement heat transfer on a flat plate. Numer. Heat Transf., Part B, Fundam. 59(3), 190–208 (2011) CrossRef

R.J. Jefferson-Loveday, P.G. Tucker, N.R. Vadlamani, J.D. Northall, Differential equation specification of integral turbulence length scales, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012. ASME Paper Number GT2012–68091

T. Jimbo, D. Biswas, Y. Yokono, Y. Niizeki, A high-order LES turbulent model to study unsteady flow characteristics in a high pressure turbine cascade, in Proc. of ASME Turbo Expo 2008 (2008). ASME Paper Number GT2008–51458

P.B.V. Johansson, L.U. Axelsson, Numerical and experimental analysis of the flow in an aggressive intermediate turbine duct, in Proc. of ASME Turbo Expo 2009, Orlando, Florida, USA, 8–12 June 2009. ASME Paper Number GT2009–59299

J. Joo, P. Durbin, Simulation of turbine blade trailing edge cooling. J. Fluids Eng. 131, 021102 (2009) CrossRef

J.C. Jouhaud, L.Y.M. Gicquel, B. Enaux, M.J. Esteve, Large-eddy-simulation modeling for aerothermal predictions behind a jet in crossflow. AIAA J. 45(10), 2438–2447 (2007) CrossRef

S.C. Kacker, J.H. Whitelaw, The effect of slot height and slot-turbulence intensity on the effectiveness of the uniform density, two-dimensional wall jet (impervious wall effectiveness of two dimensional wall jet, discussing effectiveness dependence on slot height and turbulence intensity). ASME Trans., Ser. C, J. Heat Transf. 90, 469–475 (1968a) CrossRef

S.C. Kacker, J.H. Whitelaw, Some properties of the two-dimensional, turbulent wall jet in a moving stream (open circuit wind tunnel experiment to measure properties of two dimensional plane turbulent wall jet in moving stream). ASME Trans., Ser. E, J. Appl. Mech. 35, 641–651 (1968b) CrossRef

S.C. Kacker, J.H. Whitelaw, An experimental investigation of the influence of slot-lip-thickness on the impervious-wall effectiveness of the uniform-density, two-dimensional wall jet. Int. J. Heat Mass Transf. 12(9), 1196–1201 (1969) CrossRef

S.C. Kacker, J.H. Whitelaw, The turbulence characteristics of two-dimensional wall-jet and wall-wake flows. J. Appl. Mech. 38, 239 (1971) CrossRef

C.K. Kang, Y. Baik, L. Bernal, M.V. Ol, W. Shyy, Fluid dynamics of pitching and plunging airfoils of Reynolds number between 1×104 and 6×104. AIAA–2009–0536 (2009)

M.K. Karakasis, E.M.J. Naylor, R.J. Miller, H.P. Hodson, The effect of an upstream compressor on a non-axisymmetric s-duct. Glasgow, UK, June 2010. ASME Paper Number GT–2010–2340414–18

N. Karthikeyan, L. Venkatakrishnan, Application of photogrammetry to surface flow visualization. Exp. Fluids 50(3), 689–700 (2011) CrossRef

C. Kato, M. Kaiho, A. Manabe, An overset finite-element large-eddy simulation method with applications to turbomachinery and aeroacoustics: flow simulation and modeling. J. Appl. Mech. 70(1), 32–43 (2003a) MATHCrossRef

C. Kato, H. Mukai, A. Manabe, Large-eddy simulation of unsteady flow in a mixed-flow pump. Int. J. Rotating Mach. 9(5), 345–351 (2003b)

S. Kawai, K. Fujii, Computational study of supersonic base flow using hybrid turbulence methodology. AIAA J. 43(6), 1265–1275 (2005) CrossRef

M.R. Khorrami, M.E. Berkman, F. Li, B.A. Singer, Computational simulations of a three-dimensional high-lift wing. AIAA Paper Number AIAA–2002–2804 (2002)

N.S. Kim, Analyse expérimentale d’un jet turbulent impactant sur une plaque plane et sur un obstacle de section carrée. PhD thesis, Universite Paul Sabatier Toulouse III, Toulouse, France (2005)

W.W. Kim, S. Menon, An unsteady incompressible Navier-Stokes solver for large eddy simulation of turbulent flows. Int. J. Numer. Methods Fluids 31(6), 983–1017 (1999) MATHCrossRef

P. Kjellgren, N. Anderberg, I. Wygnanski, Download alleviation by periodic excitation on a typical tilt-rotor configuration-computation and experiment. AIAA Paper Number AIAA–2000–2697 (2000)

C. Klostermeier, Investigation into the capability of large eddy simulation for turbomachinery design. PhD thesis, Engineering Department, University of Cambridge (2008)

T. Knopp, K. Weinman, D. Schwamborn, Oscillating airfoil NACA0012 at 15 degrees—a basic case for aero-elasticity, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

U. Köller, R. Mönig, B. Kösters, H.A. Schreiber, Development of advanced compressor airfoils for heavy-duty gas turbines—Part I: design and optimization. J. Turbomach. 122(3), 397–405 (2000) CrossRef

M. Konopka, M. Meinke, W. Schröder, Large-eddy simulation of shock/cooling-film interaction. AIAA J. 50(10), 2102–2114 (2012) CrossRef

J.E. Kopriva, G.M. Laskowski, M. Reza, H. Shiekhi, Assessment of scale resolution on high pressure turbine blade wakes via URANS and LES at engine scale conditions, in Proc. of ASME Turbo. Expo., San Antonio, Texas, USA (2013), pp. 3–7. ASME Paper Number GT2013–94285

B. Kosovic, Subgrid-scale modelling for the large-eddy simulation of high-Reynolds-number boundary layers. J. Fluid Mech. 336(1), 151–182 (1997) MATHCrossRef

B. Küsters, H.A. Schreiber, U. Köller, R. Mönig, N.A. Cumpsty, Development of advanced compressor airfoils for heavy-duty gas turbines: Part II: experimental and theoretical analysis. Discussion. J. Turbomach. 122(3), 406–415 (2000) CrossRef

G. Lalizel, Q. Sultan, M. Fenot, E. Dorignac, Aerothermal study of periodic pulsed jet issuing into a crossflow: application to temperature mixture near wall, in 7th Int. Symposium on Turbulence, Heat and Mass Transfer, Palmero, Sicily, Italy, 24–27 September 2012

L.S. Langston, Crossflows in a turbine cascade passage. ASME J. Eng. Power 102(4), 866–874 (1980) CrossRef

L.S. Langston, M.L. Nice, R.M. Hooper, Three-dimensional flow within a turbine cascade passage. J. Eng. Power 99, 21–28 (1977) CrossRef

R. Langtry, P. Spalart, Detached eddy simulation of a nose landing-gear cavity, in IUTAM Symposium on Unsteady Separated Flows and Their Control, ed. by M. Braza, K. Hourigan (2009), pp. 357–366 CrossRef

R. Laraufie, S. Deck, Zonal detached eddy simulation (zdes) study of a 3d curved duct, in 7th Int. Symposium on Turbulence, Heat and Mass Transfer, Palmero, Sicily, Italy, 24–27 September 2012

L. Larchevêque, P. Sagaut, I. Mary, O. Labbé, P. Comte, Large-eddy simulation of a compressible flow past a deep cavity. Phys. Fluids 15, 193 (2003) CrossRef

S. Lardeau, M. Leschziner, T. Zaki, Large eddy simulation of transitional separated flow over a flat plate and a compressor blade. Flow Turbul. Combust. 88(1–2), 19–44 (2012) MATHCrossRef

S.J. Lawson, G.N. Barakos, P. Nayyar, Appendix for M219 cavity flow: computations with and without bay doors, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

B. Lazos, Surface topology on the wheels of a generic four-wheel landing gear. AIAA J. 40(12), 2402–2411 (2002a) CrossRef

B.S. Lazos, Mean flow features around the inline wheels of four-wheel landing gear. AIAA J. 40(2), 193–198 (2002b) CrossRef

B.S. Lazos, Reynolds stresses around the wheels of a simplified four-wheel landing gear. AIAA J. 42(1), 196–198 (2004) CrossRef

F. Le Chuiton, A.D. Alascio, G. Barakos, R. Steijl, D. Schwamborn, H. Lu-deke, EC145 helicopter fuselage—an industrial case, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

B.H.K. Lee, Transonic buffet of a supercritical airfoil. Aeronaut. J. 94(935), 143–152 (1990)

D.H. Lee, Y.S. Chung, S.Y. Won, The effect of concave surface curvature on heat transfer from a fully developed round impinging jet. Int. J. Heat Mass Transf. 42(13), 2489–2497 (1999) CrossRef

K. Lehmann, Heat Transfer and aerodynamics of over-shroud leakage flows in a high pressure turbine. PhD thesis, Engineering Department, University of Cambridge (2009)

S. Leicher, FA–5 configuration, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

J. Leray, Sur les movements d’un fluide visqueux remplaisant l’espace. Acta Math. 64, 193 (1934) MathSciNetCrossRef

M.A. Leschziner, F. Tessicini, Separated flow behind an aerofoil trailing edge without camber, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

M. Leschziner, N. Li, F. Tessicini, M. Leschziner, N. Li, F. Tessicini, Simulating flow separation from continuous surfaces: routes to overcoming the Reynolds number barrier. Philos. Trans. R. Soc. A, Math. Phys. Eng. Sci. 367(1899), 2885–2903 (2009) MATHCrossRef

J. Li, Hybrid RANS/LES modelling of OGV/prediffuser flow. PhD thesis, Department of Aeronautical and Automotive Engineering, Loughborough University (2012)

N. Li, M.A. Leschziner, Large-eddy simulation of separated flow over a swept wing with approximate near-wall modelling. Aeronaut. J. 111(1125), 689–697 (2007)

Y. Liu, P.G. Tucker, G. Lo Iacono, Comparison of zonal RANS and LES for a non-isothermal ribbed channel flow. Int. J. Heat Fluid Flow 27(3), 391–401 (2006) CrossRef

D.P. Lockard, M.R. Khorrami, F. Li, High resolution calculation of a simplified landing gear. AIAA Paper Number AIAA–2004–2887 (2004)

C.A. Long, P.G. Tucker, Shroud heat transfer measurements from a rotating cavity with an axial throughflow of air. J. Turbomach. 116(3) (1994)

M. Lygren, H.I. Andersson, Turbulent flow between a rotating and a stationary disk. J. Fluid Mech. 426(1), 297–326 (2001) MATHCrossRef

M. Lygren, H.I. Andersson, Turbulence statistics in an open rotor-stator configuration. Phys. Fluids 14, 1137–1145 (2002) CrossRef

D. Lytle, B.W. Webb, Air jet impingement heat transfer at low nozzle-plate spacings. Int. J. Heat Mass Transf. 37(12), 1687–1697 (1994) CrossRef

W. Ma, X. Ottavy, L. Lu, F. Leboeuf, F. Gao, Experimental study of corner stall in a linear compressor cascade. Chin. J. Aeronaut. 24(3), 235–242 (2011) CrossRef

P. Martini, A. Schulz, Experimental and numerical investigation of trailing edge film cooling by circular coolant wall jets ejected from a slot with internal rib arrays. J. Turbomach. 126(2), 229–236 (2004) CrossRef

P. Martini, A. Schulz, C.F. Whitney, E. Lutum, Experimental and numerical investigation of trailing edge film cooling downstream of a slot with internal rib arrays. Proc. Inst. Mech. Eng. A, J. Power Energy 217(4), 393–401 (2003) CrossRef

P. Martini, A. Schulz, H.J. Bauer, C.F. Whitney, Detached eddy simulation of film cooling performance on the trailing edge cutback of gas turbine airfoils. J. Turbomach. 128(2), 292–299 (2006a) CrossRef

P. Martini, A. Schulz, H.J. Bauer, C.F. Whitney, Film cooling effectiveness and heat transfer on the trailing edge cutback of gas turbine airfoils with various internal cooling designs. J. Turbomach. 128(1), 196–205 (2006b) CrossRef

I. Mary, P. Sagaut, Large eddy simulation of flow around an airfoil near stall. AIAA J. 40(6), 1139–1145 (2002) CrossRef

K. Matsuura, C. Kato, Large-eddy simulation of compressible transitional cascade flows with and without incoming free-stream turbulence. JSME Int. J., Ser. B 49(3), 660–669 (2006) CrossRef

N.E. May, C.A. McHugh, A.J. Peace, An investigation of two intake/S-bend diffuser geometries using the Sauna CFD system—phase 1. Aircraft Research Association, MEMO 386, 1993

J.J. McGuirk, Development, validation and application of large eddy simulation for gas-turbine combustion system fluid mechanics, in Proc. 2nd ISJPPE, 2nd Int. Symposium on Jet Propulsion and Power Engineering Gulin, China, 22–26 September 2008. Paper Number 2008–ISJPPE–0006

J.J. McGuirk, A. Taylor, Numerical simulation of gas turbine combustion processes-present status and future trends. J. Gas Turbine Soc. Jpn. 30(5), 347–361 (2002)

W.A. McMullan, G.J. Page, Large eddy simulation of a compressor cascade and the influence of spanwise domain. J. Power Energy 225(6), 817–831 (2011) CrossRef

G. Medic, O. Sharma, Large-eddy simulation of flow in a low-pressure turbine cascade, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012. ASME Paper Number GT2012–68878

Y. Mei, A. Guha, Implicit numerical simulation of transonic flow through turbine cascades on unstructured grids. Proc. Inst. Mech. Eng. A, J. Power Energy 219(1), 35–47 (2005) CrossRef

C.P. Mellen, J. Fröhlich, W. Rodi, Lessons from LESFOIL project on large-eddy simulation of flow around an airfoil. AIAA J. 41(4), 573–581 (2003) CrossRef

F. Mendonca, O. Baris, G. Capon, Simulation of radial compressor aeroacoustics using CFD, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012. ASME Paper Number GT2012–70028

K. Menzies, Large eddy simulation applications in gas turbines. Philos. Trans. R. Soc. A, Math. Phys. Eng. Sci. 367(1899), 2827–2838 (2009) CrossRef

N.L. Messersmith, J.C. Dutton, Characteristic features of large structures in compressible mixing layers. AIAA J. 34(9), 1814–1821 (1996) CrossRef

V. Michelassi, J.G. Wissink, J. Fröhlich, W. Rodi, Large-eddy simulation of flow around low-pressure turbine blade with incoming wakes. AIAA J. 41(11), 2143–2156 (2003a) CrossRef

V. Michelassi, J.G. Wissink, W. Rodi, Direct numerical simulation, large eddy simulation and unsteady Reynolds-averaged Navier-Stokes simulations of periodic unsteady flow in a low-pressure turbine cascade: a comparison. J. Power Energy 217(4), 403–411 (2003b) CrossRef

R. Mittal, S. Venkatasubramanian, F.M. Najjar, Large-eddy simulation of flow through a low-pressure turbine cascade. AIAA Paper Number AIAA–2001–2560 (2001)

M.V. Morales, The effect of compressibility on unsteady boundary layers in high lift low pressure turbines. PhD thesis, Engineering Department, University of Cambridge (2004)

S.A. Morton, R.M. Cummings, D.B. Kholodar, High resolution turbulence treatment of f/a–18 tail buffet. J. Aircr. 44(6) (2007)

S. Murari, S. Sunnam, J.S. Liu, Steady state and transient cfd studies on aerodynamic performance validation of a high pressure turbine, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012. ASME Paper Number GT2012–68853

A. Murata, S. Mochizuki, Large eddy simulation with a dynamic subgrid-scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulators. Int. J. Heat Mass Transf. 43(7), 1243–1259 (2000) MATHCrossRef

C. Muthanna, Flowfield downstream of a compressor cascade with tip leakage. PhD thesis, Virginia Polytechnic Institute and State University (1998)

Y. Nagano, H. Hattori, T. Houra, DNS of velocity and thermal fields in turbulent channel flow with transverse-rib roughness. Int. J. Heat Fluid Flow 25(3), 393–403 (2004) CrossRef

W.B. Nicoll, J.H. Whitelaw, The effectiveness of the uniform density, two-dimensional wall jet. Int. J. Heat Mass Transf. 10(5), 623–639 (1967) CrossRef

M.V. Ol, L. Bernal, C.K. Kang, W. Shyy, Shallow and deep dynamic stall for flapping low Reynolds number airfoils. Exp. Fluids 46(5), 883–901 (2009) CrossRef

T.S.D. O’Mahoney, Large-eddy simulation of turbine rim seals. PhD thesis, School of Engineering, University of Surrey (2011)

T.S.D. O’Mahoney, N.J. Hills, J.W. Chew, T. Scanlon, Large-eddy simulation of rim seal ingestion, in Proc. of ASME Turbo Expo 2010, Glasgow, UK, 14–18 June 2010. ASME Paper Number GT2010–22962

M. Opiela, R. Keinke, W. Schroder, LES of wake-blade interaction, in Proc. of the 4th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Firenze, Italy, 20–23 March 2001. AIAA Paper Number AIAA–2011–2881

M.M. Opoka, The effect of upstream and downstream blade rows on transition in low pressure turbines. PhD thesis, Engineering Department, University of Cambridge (2007)

L.R. Owens, B.G. Allan, S.A. Gorton, Boundary-layer-ingesting inlet flow control. J. Aircr. 45(4), 1431–1440 (2008) CrossRef

J. Panda, Two point space-time correlation of density fluctuations measured in high velocity free jets. Technical Report NASA–CR–2006–214222, NASA (2006)

J. Panda, R.G. Seasholtz, Velocity and temperature measurement in supersonic free jets using spectrally resolved Rayleigh scattering. Technical Report NASA–TM–2004–212391, NASA (2004)

J. Panda, R.G. Seasholtz, K.A. Elam, A.F. Mielke, D.G. Eck, Effect of heating on turbulent density fluctuations and noise generation from high speed jets, in 10th AIAA Aeroacoustics Conference (2004). AIAA Paper Number AIAA–2004–3016

K. Paschal, L. Jenkins, C. Yao, Unsteady slat-wake characteristics of a high-lift configuration. AIAA Paper Number AIAA–2000–0139 (2000)

W.R. Pauley, J.K. Eaton, Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer. AIAA J. 26(7), 816–823 (1988) CrossRef

S.-H. Peng, M219 cavity flow, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

G. Petit, M. Mallet, Contribution of Dassault to DESider, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

A. Pfau, M. Treiber, M. Sell, G. Gyarmathy, Flow interaction from the exit cavity of an axial turbine blade row labyrinth seal. J. Turbomach. 123(2), 342–352 (2001) CrossRef

A. Pfau, A.I. Kalfas, R.S. Abhari, Making use of labyrinth interaction flow. ASME Trans. J. Turbomach. 129(1), 164–174 (2007) CrossRef

J.R. Pietrzyk, D.G. Bogard, M.E. Crawford, Effects of density ratio on the hydrodynamics of film cooling. J. Turbomach. 112, 437–443 (1990) CrossRef

H. Pitsch, Large-eddy simulation of turbulent combustion. Annu. Rev. Fluid Mech. 38, 453–482 (2006) MathSciNetCrossRef

I. Popovic, Aerothermal investigation of hub leakage flows in high-pressure turbines. PhD thesis, Engineering Department, University of Cambridge (2010)

G. Rau, M. Cakan, D. Moeller, T. Arts, The effect of periodic ribs on the local aerodynamic and heat transfer performance of a straight cooling channel. J. Turbomach. 120(2), 368–375 (1988) CrossRef

B. Raverdy, I. Mary, P. Sagaut, N. Liamis, High-resolution large-eddy simulation of flow around low-pressure turbine blade. AIAA J. 41(3), 390–397 (2003) CrossRef

H.J. Rehder, A. Dannhauer, Experimental investigation of turbine leakage flows on the three-dimensional flow field and endwall heat transfer. J. Turbomach. 129(3), 608–618 (2007) CrossRef

A.J. Revell, T.J. Craft, D.R. Laurence, Turbulence modelling of unsteady turbulent flows using the stress strain lag model. Flow Turbul. Combust. 86(1), 129–151 (2011) MATHCrossRef

C.M. Rhie, W.L. Chow, Numerical study of the turbulent flow past an airfoil with trailing edge separation. AIAA J. 21(11), 1525–1532 (1983) MATHCrossRef

D.P. Rizzetta, M.R. Visbal, Large-eddy simulation of supersonic cavity flowfields including flow control. AIAA J. 41(8), 1452–1462 (2003) CrossRef

D.P. Rizzetta, M.R. Visbal, P.E. Morgan, A high-order compact finite-difference scheme for large-eddy simulation of active flow control. Prog. Aerosp. Sci. 44(6), 397–426 (2008) CrossRef

B. Rosic, The control of shroud leakage flows in low aspect ratio multistage turbines. PhD thesis, Engineering Department, University of Cambridge (2006)

S. Roy, S. Kapadia, J.D. Heidmann, Film cooling analysis using des turbulence model, in Proceedings of ASME Turbo Expo, Citeseer (2003), pp. 16–19

A. Rozati, D.K. Tafti, Large eddy simulation of leading edge film cooling: Part I—computational domain and effect of coolant pipe inlet condition, in Proc. of ASME Turbo Expo 2007, Montreal, Canada, 14–17 May 2007. ASME Paper Number GT2007–27689

A. Rozati, D.K. Tafti, Large eddy simulation of leading edge film cooling—Part II: heat transfer and effect of blowing ratio. J. Turbomach. 130, 041015 (2008) CrossRef

P. Sagaut, LES and DNS simulation of turbomachinery flows, in Recent Developments in Numerical Methods for Turbomachinery Flows. VKI Lecture (2001)

P. Sagaut, S. Deck, Large eddy simulation for aerodynamics: status and perspectives. Philos. Trans. R. Soc. A, Math. Phys. Eng. Sci. 367(1899), 2849–2860 (2009) MATHCrossRef

A.K. Saha, S. Acharya, Flow and heat transfer in an internally ribbed duct with rotation: an assessment of large eddy simulations and unsteady Reynolds-averaged Navier-Stokes simulations. J. Turbomach. 127(2), 306–320 (2005) CrossRef

R.D. Sandberg, Numerical investigation of turbulent supersonic axisymmetric wakes. J. Fluid Mech. 1(1), 1–33 (2012)

R.D. Sandberg, H.F. Fasel, Direct numerical simulations of transitional supersonic base flows. AIAA Paper Number AIAA–2005–98 (2005)

R.D. Sandberg, H.F. Fasel, Numerical investigation of transitional supersonic axisymmetric wakes. J. Fluid Mech. 563(1), 1–41 (2006a) MATHCrossRef

R.D. Sandberg, H.F. Fasel, Direct numerical simulations of transitional supersonic base flows. AIAA J. 44(4), 848–858 (2006b) CrossRef

S. Sarkar, Effects of passing wakes on a separating boundary layer along a low-pressure turbine blade through large-eddy simulation. J. Power Energy 221(4), 551–564 (2007) CrossRef

S. Sarkar, Identification of flow structures on a lp turbine blade due to periodic passing wakes. J. Fluids Eng. 130(6), 061103 (2008) CrossRef

S. Sarkar, Influence of wake structure on unsteady flow in a low pressure turbine blade passage. J. Turbomach. 131(4) (2009)

S. Sarkar, P.R. Voke, LES of Passing Wakes Influencing Transition on Turbine Blades. Number ERCOFTAC Series, Direct and Large-Eddy Simulation V (Kluwer Academic, Dordrecht, 2003)

S. Sarkar, P.R. Voke, Large-eddy simulation of unsteady surface pressure over a low-pressure turbine blade due to interactions of passing wakes and inflexional boundary layer. J. Turbomach. 128(2), 221–231 (2006) CrossRef

J.U. Schlüter, Large eddy simulations of flow and mixing in jets and swirl flows: application to a gas turbine. PhD thesis, INPT, Toulouse, France (2000)

H. Schneider, D. von Terzi, H.J. Bauer, Large-eddy simulations of trailing-edge cutback film cooling at low blowing ratio. Int. J. Heat Fluid Flow 31(5), 767–775 (2010) CrossRef

P. Schuler, K. Dullenkopf, H.J. Bauer, Investigation of the influence of different rim seal geometries in a low-pressure turbine, in Proc. of ASME Turbo Expo (2011). ASME Paper Number GT2011–45682

V. Schulte, Unsteady separated boundary layers in axial-flow turbomachinery. PhD thesis, Engineering Department, University of Cambridge (1995)

A.X. Sengissen, J.F. Van Kampen, R.A. Huls, G.G.M. Stoffels, J.B.W. Kok, T.J. Poinsot, LES and experimental studies of cold and reacting flow in a swirled partially premixed burner with and without fuel modulation. Combust. Flame 150(1), 40–53 (2007) CrossRef

E. Séverac, E. Serre, A spectral vanishing viscosity for the LES of turbulent flows within rotating cavities. J. Comput. Phys. 226(2), 1234–1255 (2007) MathSciNetMATHCrossRef

E.A. Sewall, D.K. Tafti, Large eddy simulations of the developing region of a rotating ribbed internal turbine blade cooling channel, in Proc. of ASME Turbo Expo 2004, Vienna, Austria (2004). ASME Paper Number GT2004–53833

L. Shaw, Active control for cavity acoustics. AIAA Paper Number AIAA–98–2347 (1998)

C.M. Shieh, P.J. Morris, Comparison of two- and three-dimensional cavity flows, in 39th AIAA, Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA (2001). AIAA Paper Number AIAA–2001–0511

M. Shur, P.R. Spalart, M. Strelets, A. Travin, Detached-eddy simulation of an airfoil at high angle of attack. Eng. Turbul. Model. Exp. 4, 669–678 (1999)

C.H. Sieverding, D. Ottolia, C. Bagnera, A. Comadoro, J.F. Brouckaert, J.M. Desse, Unsteady turbine blade wake characteristics. J. Turbomach. 126(4), 551–559 (2004) CrossRef

F. Simon, S. Deck, P. Guillen, P. Sagaut, Reynolds averaged Navier-Stokes/Large-Eddy simulations of supersonic base flow. AIAA J. 44(11), 2578–2590 (2006) CrossRef

F. Simon, S. Deck, P. Guillen, R. Cayzac, A. Merlen, Zonal-detached-eddy simulation of projectiles in the subsonic and transonic regimes. AIAA J. 45(7), 1606–1619 (2007a) CrossRef

F. Simon, S. Deck, P. Guillen, P. Sagaut, A. Merlen et al., Numerical simulation of the compressible mixing layer past an axisymmetric trailing edge. J. Fluid Mech. 591, 215–254 (2007b) MATHCrossRef

A.K. Sinha, D.G. Bogard, M.E. Crawford, Film cooling effectiveness downstream of a single row of holes with variable density ratio. J. Turbomach. 113, 442–449 (1991) CrossRef

K.M. Smith, J.C. Dutton, Investigation of large-scale structures in supersonic planar base flows. AIAA J. 34(6), 1146–1152 (1996) CrossRef

K.M. Smith, J.C. Dutton, Evolution and convection of large-scale structures in supersonic reattaching shear flows. Phys. Fluids 11, 2127–2138 (1999) MATHCrossRef

K.M. Smith, J.C. Dutton, The effects of expansion strength on large-scale structures in compressible free shear layers. Phys. Fluids 13, 2076–2086 (2001) CrossRef

B.I. Soemarwoto, J.C. Kwok, H. van der Ven, Contribution of Dassault to DESider, in DESider—A European Effort on Hybrid RANS-LES Modelling, ed. by W. Haase, M. Braza, A. Revell. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 103 (Springer, Berlin, 2009)

P. Spalart, L. Hedges, M. Shur, A. Travin, Simulation of active flow control on a stalled airfoil. Flow Turbul. Combust. 71(1), 361–373 (2003) MATHCrossRef

P.R. Spalart, M.L. Shur, M.K. Strelets, A.K. Travin, Towards noise prediction for rudimentary landing gear, in IUTAM Symposium on Computational Aero-Acoustics for Aircraft Noise Prediction Procedia IUTAM, vol. 1 (2010), pp. 283–292

M. Sreedhar, S. Ragab, Large eddy simulation of a longitudinal vortex, in 32nd AIAA, Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, 10–13 January 1994. AIAA Paper Number AIAA–94–0529

R.D. Stieger, The effects of wakes on separating boundary layers in low pressure turbines. PhD thesis, Engineering Department, University of Cambridge (2002)

R.D. Stieger, H.P. Hodson, The transition mechanism of highly loaded low-pressure turbine blades, in Proc. of ASME Turbo Expo 2003, Atlanta, Georgia, USA, 16–19 June 2003. ASME Paper Number GT2003–38304

M. Strelets, Detached eddy simulation of massively separated flows. AIAA Paper Number AIAA–2001–0879 (2001)

K.L. Suder, Ml. Celestina, Experimental and computational investigation of the tip clearance flow in a transonic axial compressor rotor. Technical Report NASA–TM–106711, NASA (1994)

K.L. Suder, R.V. Chima, A.J. Strazisar, W.B. Roberts, The effect of adding roughness and thickness to a transonic axial compressor rotor. Technical Report NASA–TR–95–30524, NASA STI/Recon Technical Report N (1995)

K.E. Swalwell, J. Sheridan, W.H. Melbourne, Frequency analysis of surface pressure on an airfoil after stall, in 21st AIAA Aerodynamics Conference (2003). AIAA Paper Number AIAA–2003–3416

N. Swaminathan, K. Bray, Turbulent Premixed Flames (Cambridge University Press, Cambridge, 2011) CrossRef

R.C. Swanson, E. Turkel, On central-difference and upwind schemes. J. Comput. Phys. 101(2), 292–306 (1992) MathSciNetMATHCrossRef

M.F. Tachie, R. Balachandar, D.J. Bergstrom, Roughness effects on turbulent plane wall jets in an open channel. Exp. Fluids 37(2), 281–292 (2004) CrossRef

D.K. Tafti, Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades. Int. J. Heat Fluid Flow 26(1), 92–104 (2005) CrossRef

K. Takeda, G.B. Ashcroft, X. Zhang, P.A. Nelson, Unsteady aerodynamics of slat cove flow in a high-lift device configuration. AIAA Paper Number AIAA–2001–0706 (2001)

H.K. Tanna, An experimental study of jet noise. Part I: turbulent mixing noise. J. Sound Vib. 50(3), 405–428 (1977) CrossRef

N. Tauveron, Simulation of a compressor cascade with stalled flow using large eddy simulation with two-layer approximate boundary conditions. Nucl. Eng. Des. 240(2), 321–335 (2010) CrossRef

B. Thomber, D. Dfikakis, Implicit large-eddy simulation of a deep cavity using high-resolution methods. AIAA J. 46(10), 2634–2645 (2008) CrossRef

S. Trapier, P. Duveau, S. Deck, Experimental study of supersonic inlet buzz. AIAA J. 44(10), 2354–2365 (2006) CrossRef

S. Trapier, S. Deck, P. Duveau, P. Sagaut, Time-frequency analysis and detection of supersonic inlet buzz. AIAA J. 45(9), 2273–2284 (2007) CrossRef

S. Trapier, S. Deck, P. Duveau, Delayed detached-eddy simulation and analysis of supersonic inlet buzz. AIAA J. 46(1), 118–131 (2008) CrossRef

P.G. Tucker, Temporal behavior of flow in rotating cavities. Numer. Heat Transf., Part A, Appl. 41(6–7), 611–627 (2002) CrossRef

P.G. Tucker, Turbulence modelling of problem aerospace flows. Int. J. Numer. Methods Fluids 51(3), 261–283 (2006) MATHCrossRef

P.G. Tucker, Computation of unsteady turbomachinery flows: Part 1—progress and challenges. Prog. Aerosp. Sci. 47(7), 522–545 (2011a) CrossRef

P.G. Tucker, Hybrid Hamilton-Jacobi-Poisson wall distance function model. Comput. Fluids 44(1), 130–142 (2011b) CrossRef

P. Tucker, S. Eastwood, C. Klostermeier, R. Jefferson-Loveday, J. Tyacke, Y. Liu, Hybrid les approach for practical turbomachinery flows—Part I: hierarchy and example simulations. J. Turbomach., Trans. ASME 134(2) (2012)

J. Tyacke, R.J. Jefferson-Loveday, P.G. Tucker, Numerical modelling of seal type geometries, in Proc. of ASME Turbo Expo, Copenhagen, Denmark, 11–15 June 2012a. ASME Paper Number GT2012–68840

J.C. Tyacke, P.G. Tucker, R. Jefferson-Loveday, N.R. Vadlamani, R. Watson, I. Naqavi, LES of aero engine turbines, in ECCOMAS 2012, 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, 10–14 September 2012b

M. Tyagi, S. Acharya, Large eddy simulation of turbulent flows in complex and moving rigid geometries using the immersed boundary method. Int. J. Numer. Methods Fluids 48(7), 691–722 (2005) MATHCrossRef

A. Uzun, M.Y. Hussaini, C.L. Streett, Large-eddy simulation of a wing-tip vortex on overset grids. AIAA J. 44(6), 1229–1242 (2006) CrossRef

N.R. Vadlamani, High fidelity large eddy simulation of turbines: current status and future outlook. PhD thesis, Engineering Department, Cambridge University (2013)

L. Venkatakrishnan, N. Karthikeyan, K. Mejia, Experimental studies on a rudimentary four wheel landing gear. AIAA Paper Number AIAA–2011–0354 (2011)

M.R. Visbal, Numerical investigation of deep dynamic stall of a plunging airfoil. AIAA J. 49(10), 2152–2170 (2011) MathSciNetCrossRef

K. Viswanathan, Aeroacoustics of hot jets. J. Fluid Mech. 516, 39–82 (2004) MATHCrossRef

A.K. Viswanathan, D.K. Tafti, Detached eddy simulation of turbulent flow and heat transfer in a two-pass internal cooling duct. Int. J. Heat Fluid Flow 27(1), 1–20 (2006) CrossRef

Y. Wang, W.J. Devenport, Wake of a compressor cascade with tip gap, Part 2: effects of endwall motion. AIAA J. 42(11), 2332–2340 (2004) CrossRef

M. Wang, P. Moin, Computation of trailing-edge flow and noise using large-eddy simulation. AIAA J. 38(12), 2201–2209 (2000) CrossRef

Z.-N. Wang, X. Yuan, Unsteady mechanisms of compressor corner separation over a range of incidences based on hybrid LES/RANS, in Proc. of ASME Turbo Expo, San Antonio, Texas, USA, 3–7 June 2013

K. Watanabe, T. Takahashi, LES simulation and experimental measurement of fully developed ribbed channel flow and heat transfer, in Proc. of ASME Turbo. Expo. 2002, Amsterdam, The Netherlands, 3–6 June 2002. ASME Paper Number GT–2002–30203

S.R. Wellborn, T.H. Okiishi, B.A. Reichert, A study of the compressible flow through a diffusing S-duct. Technical Report NASA–TM–106411, NASA (1993)

A. Wheeler, Effect of unsteady flows on compressor performance. PhD thesis, Engineering Department, Cambridge University (2007)

J. Winkler, S. Moreau, LES of the trailing-edge flow and noise of a naca6512–63 airfoil at zero angle of attack, in Center for Turbulence Research, Proceedings of the Summer Program (2008), pp. 331–342

J.G. Wissink, DNS of separating, low Reynolds number flow in a turbine cascade with incoming wakes. Int. J. Heat Fluid Flow 24(4), 626–635 (2003) CrossRef

J. Wissink, W. Rodi, DNS of a laminar separation bubble affected by free-stream disturbances. ERCOFTAC Ser. 9, 213–220 (2004) CrossRef

J.G. Wissink, W. Rodi, H.P. Hodson, The influence of disturbances carried by periodically incoming wakes on the separating flow around a turbine blade. Int. J. Heat Fluid Flow 27(4), 721–729 (2006) CrossRef

X. Wu, P.A. Durbin, Evidence of longitudinal vortices evolved from distorted wakes in a turbine passage. J. Fluid Mech. 446(1), 199–228 (2001) MATH

X. Wu, J.P. Hickey, Visualization of continuous stream of grid turbulence past the Langston turbine cascade. AIAA J. 50(1), 215–225 (2012) CrossRef

X. Wu, K.D. Squires, Prediction and investigation of the turbulent flow over a rotating disk. J. Fluid Mech. 418(1), 231–264 (2000) MATHCrossRef

X. Wu, R.G. Jacobs, J.C.R. Hunt, P.A. Durbin, Simulation of boundary layer transition induced by periodically passing wakes. J. Fluid Mech. 398, 109–153 (1999) MATHCrossRef

X. Wu, L.T. Li, M.S. Hilaire, Migration of a turbulent patch through a high-pressure turbine cascade. Phys. Fluids 21, 025110 (2009) CrossRef

X. Yan, A preheated-wall transient method using liquid crystals for the measurement of heat transfer on external surfaces and in ducts. PhD thesis, University of California, Davis (1993)

A. Yoshizawa, Bridging between eddy-viscosity-type and second-order models using a two-scale dia, in Ninth Symposium on Turbulent Shear Flows, vol. 18, Kyoto, Japan, 16 August 1993, pp. 1–23

D. You, M. Wang, R. Mittal, P. Moin, Study of rotor tip-clearance flow using large eddy simulation. AIAA J. 838 (2003)

D. You, R. Mittal, M. Wang, P. Moin, Computational methodology for large-eddy simulation of tip-clearance flows. AIAA J. 42(2), 271–279 (2004) CrossRef

D. You, M. Wang, R. Mittal, P. Moin, Large-eddy simulations of longitudinal vortices embedded in a turbulent boundary layer. AIAA J. 44(12), 3032 (2006a) CrossRef

D. You, M. Wang, P. Moin, R. Mittal, Effects of tip-gap size on the tip-leakage flow in a turbomachinery cascade. Phys. Fluids 18, 105102 (2006b) CrossRef

L.L. Yuan, R.L. Street, J.H. Ferziger, Large-eddy simulations of a round jet in crossflow. J. Fluid Mech. 379(1), 71–104 (1999) MATHCrossRef

T. Zaki, J. Wissink, W. Rodi, P. Durbin, Direct numerical simulations of transition in a compressor cascade: the influence of free-stream turbulence. J. Fluid Mech. 1, 1–42 (2006)

T.A. Zaki, J.G. Wissink, P.A. Durbin, W. Rodi, Direct computations of boundary layers distorted by migrating wakes in a linear compressor cascade. Flow Turbul. Combust. 83(3), 307–322 (2009) MATHCrossRef

X.F. Zhang, Separation and transition control on ultra-high-lift low pressure turbine blades in unsteady flow. PhD thesis, Engineering Department, Cambridge University (2005)

M.D. Zhou, I. Wygnanski, Parameters governing the turbulent wall jet in an external stream. AIAA J. 31(5), 848–853 (1993) CrossRef

Titel: Applications of Eddy Resolving Methods
verfasst von: P. G. Tucker
Verlag: Springer Netherlands
Buch: Unsteady Computational Fluid Dynamics in Aeronautics
Print ISBN: 978-94-007-7048-5

Electronic ISBN: 978-94-007-7049-2

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-94-007-7049-2_5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten