nach oben

Steel in Translation

Erschienen in:

01.08.2023

Applying Polarized Light to the Estimation of Bainitic Fraction in Kh2G2S2MF Steel Grades. Part 2

verfasst von: A. N. Yurchenko, M. V. Golubeva, E. V. Svyatisheva, Yu. N. Simonov

Erschienen in: Steel in Translation | Ausgabe 8/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

It has been established that in order to obtain a high-quality image of a surface structure in polarized light with crossed nicols and to accurately quantify the bainitic fraction in Kh2G2S2MF grade structural steel, alongside with the LePera reagent, Nital reagent can be used. It has been established that the brightness level of martensite in polarized light does not depend on the etching time of 22Kh2G2S2MF and 44Kh2G2S2MF grade steel being at the background level.

Vorheriger Artikel Influence of Final Heat Treatment Modes on Structure and Properties of High Strength Sheet Steel

Nächster Artikel Laser Processing of Wear-Resistant Iron Based Electrochemical Composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Yurchenko, A.N. and Simonov, Yu.N., Structural features, mechanical properties, and heat treatment of bainitic steels, Vestn. Permsk. Nats. Issled. Politekh. Univ. Mashinostr. Materialoved., 2016, vol. 18, no. 3, pp. 160–181.

Bhadeshia, H.K.D.H., Bainite in Steels: Theory and Practice, London: CRC Press, 2001. https://doi.org/10.1201/9781315096674CrossRef

Yurchenko, A.N., Simonov, Yu.N., Panov, D.O., and Zhitenev, A.I., Transformations, structure and properties of steel 22Kh2G2S2MF under continuous cooling, Met. Sci. Heat Treat., 2019, vol. 61, nos. 9–10, pp. 617–621. https://doi.org/10.1007/s11041-020-00469-5CrossRef

Yurchenko, A.N., Simonov, Yu.N., and Efimova, O.V., Determination of the complex structure of structural steel by the method of color etching, Met. Sci. Heat Treat., 2019, vol. 61, nos. 9–10, pp. 622–627. https://doi.org/10.1007/s11041-020-00470-yCrossRef

Yurchenko, A.N. and Simonov, Yu.N., A method for revealing bainite in steel, RF Patent 2734878, Byull. Izobret., 2020, no. 30.

A method for qualitative evaluation of needle-like bainite in structural steels of type Kh2G2S2MF, RF Patent 2769111, Byull. Izobret., 2022, no. 10.

Yurchenko, A.N. and Simonov, Yu.N., Application of polarized light to estimate the bainite fraction in 44Kh2G2S2MF steel after isothermal hardening. Part 1, Steel Transl., 2023, vol. 53, no. 1, pp. 86–91. https://doi.org/10.3103/S0967091223010151CrossRef

Kazakov, A.A., Kazakova, E.I., Kiselev, D.V., and Kurochkina, O.V., Method for studying the structure of pipe steels, RF Patent 2449055, Byull. Izobret., 2012, no. 12.

Kazakov, A., Kiselev, D., Sych, O., and Khlusova, E., Quantitative assessment of microstructural inhomogeneity by thickness of hot-rolled plates made of cold-resistant low-alloy steel for Arctic applications, CIS Iron Steel Rev., 2012, no. 1, pp. 41–49. https://doi.org/10.17580/cisisr.2020.02.10

10.

Van der Voort, G., Identifying isothermally-transformed steel microstructural constituents, Tech. Notes, 2015, vol. 5, no. 4, pp. 1–5.

11.

Simonov, Yu.N., Simonov, M.Yu., Panov, D.O., Vylezhnev, V.P., and Kaletin, A.Yu., Formation of structure of lower carbide-free bainite due to isothermal treatment of steels of types Kh3G3MFS and KhN3MFS, Met. Sci. Heat Treat., 2016, vol. 1, no. 58, pp. 61–70. https://doi.org/10.1007/s11041-016-9965-zCrossRef

12.

Kaletin, A.Yu., Kaletina, J.V., and Ryzhkov, M.A., Carbide-free-bainite in low carbon construction steels, Lett. Mater., 2020, vol. 10, no. 3, pp. 249–253. https://doi.org/10.22226/2410-3535-2020-3-249-253CrossRef

13.

Pashangeh, S., Ghasemi Banadkouki, S.S., Besharati, F., Mehrabi, F., Somani, M., and Kömi, J., Color light metallography versus electron microscopy for detecting and estimating various phases in a high-strength multiphase steel, Metals, 2021, vol. 11, no. 6, p. 855. https://doi.org/10.3390/met11060855CrossRef

14.

Pashangeh, S., Banadkouki, S.S.G., and Somani, M.C., Abnormal mechanical response in a silicon bearing medium carbon low alloy steel following quenching and bainitic holding versus quenching and partitioning treatment, J. Mater. Res. Technol., 2020, vol. 9, no. 3, pp. 5007–5023. https://doi.org/10.1016/j.jmrt.2020.03.019CrossRef

15.

Van der Voort, G., Color Metallography, ASM Handbook: Metallogr., Microstruct., 2004, vol. 9, pp. 493–512.

16.

Kannan, R., Wang, Yi., and Li, L., A dilatometric analysis of inverse bainite transformation, J. Mater. Sci., 2018, vol. 53, no. 5, pp. 3692–3708. https://doi.org/10.1007/s10853-017-1752-8CrossRef

17.

Ben Fredj, E., Ghazemi Nanesa, H., Jahazi, M., and Morin, J.B., Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings, Iron Steel Res. Int., 2018, vol. 25, pp. 554–562. https://doi.org/10.1007/s42243-018-0070-yCrossRef

18.

Lin, S., Borggren, U., Stark, A., Borgenstam, A., Mu, W., and Hedström, P., In-situ high-energy X-ray diffraction study of austenite decomposition during rapid cooling and isothermal holding in two HSLA steels, Metall. Mater. Trans. A, 2021, vol. 52, no. 5, pp. 1812–1825. https://doi.org/10.1007/s11661-021-06192-xCrossRef

19.

Skoblo, T.S., Klochko, O.Yu., Belkin, E.L., et al., Development of the methods for evaluating the structure of rails quenched with HF currents, Stal’, 2014, no. 3, pp. 74–82.

20.

Skoblo, T.S., Klochko, O.Yu., Belkin, E.L., and Sidashenko, A.I., Studying the structure of high-chromium cast irons, Zavod. Lab. Diagn. Mater., 2017, vol. 83, no. 5, pp. 27–38.

21.

Shchegolev, A.V., Kletsova, O.A., Firsova, N.V., Gryzunov, V.I., and Svechnikova, V.V., Kinetics of phase transformations in roll steel 8Kh3SMF, Met. Sci. Heat Treat., 2020, vol. 61, nos. 9–10, pp. 527–533. https://doi.org/10.1007/s11041-020-00457-9CrossRef

22.

Šebestová, H., Horník, P., Mrňa, L., Doležal, P., and Mikmeková, E., The effect of arc current on microstructure and mechanical properties of hybrid lastig welds of high-strength low-alloy steels, Metall. Mater. Trans. B, 2018, vol. 49, no. 6, pp. 3559–3569. https://doi.org/10.1007/s11663-018-1385-6CrossRef

23.

Kormyshev, V.E., Polevoi, E.V., Yur’ev, A.A., Gromov, V.E., and Ivanov, Yu.F., The structural formation in differentially-hardened 100-meter-long rails during long-term operation, Steel Transl., 2020, vol. 50, no. 2, pp. 77–83. https://doi.org/10.3103/s0967091220020047CrossRef

24.

Kolbasnikov, N.G., Zotov, O.G., Shamshurin, A.I., and Luk’yanov, A.A., Study of lath morphology bainite in high-strength pipe steel, Met. Sci. Heat Treat., 2013, vol. 55, nos. 5–6, pp. 287–293. https://doi.org/10.1007/s11041-013-9621-9CrossRef

25.

Akhnazarova, S. and Kafarov, V., Metody optimizatsii eksperimenta v khimicheskoi tekhnologii. Ucheb. posob. dlya khim.-tekhnol. spets. vuzov (Methods for Optimizing Experiments in Chemical Technology: Textbook for Chemical Technological Specialties of Universities), Moscow: Vysshaya Shkola, 1985.

26.

Skoblo, T.S., Klochko, O.Yu., and Belkin, E., Application of computer analysis of metallographical images in studying the structure of high-chromium cast iron, Zavod. Lab. Diagn. Mater., 2012, vol. 78, no. 6, pp. 35–42.

Titel: Applying Polarized Light to the Estimation of Bainitic Fraction in Kh2G2S2MF Steel Grades. Part 2
verfasst von: A. N. Yurchenko
M. V. Golubeva
E. V. Svyatisheva
Yu. N. Simonov
Publikationsdatum: 01.08.2023
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 8/2023
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S096709122308017X

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2023

Prospects for the Use of Anti-Icing Materials in the Operation of Wind Generators

Influence of Final Heat Treatment Modes on Structure and Properties of High Strength Sheet Steel

Development of Hot-Rolled High-Strength Coil Steel with a Thickness of 4 mm for Load-Lifting Equipment

Wear and Service Life of Agricultural Moldboards Restored Using Various Technologies

About the Influence of Silicate Binding on Strength of Iron Ore Pellets from Highly Enriched Concentrates

Effect of Coatings of Different Types on Stress Corrosion Cracking of Low-Alloyed Steel X70

Premium Partner

Marktübersichten