nach oben

Journal of Failure Analysis and Prevention

Erschienen in:

01.02.2017 | Technical Article---Peer-Reviewed

Assessment of Pipe Defects Using a Constraint-Modified Failure Assessment Diagram

verfasst von: O. Bouledroua, M. Hadj Meliani, G. Pluvinage

Erschienen in: Journal of Failure Analysis and Prevention | Ausgabe 1/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, the failure assessment diagram (FAD) is constraint modified using the assumption that the constraint T stress is proportional to the non-dimensional loading. The constraint-modified FAD has been used to compute safety factors associated with spherical and elliptic defects and a long notch. The results were compared to the classical approach, indicating the possibility of a reduction of conservatism. In addition, the use of domain constraint-modified FAD indicates that in some cases, increases in fracture toughness due to the loss of constraint lead to the use of limit analysis rather than an elasto-plastic fracture mechanics approach.

Vorheriger Artikel Characterization of Failure Behavior in Distorted WC-Co Tip of Coal Mining Picks

Nächster Artikel Study on Microstructure and Properties of 20MnMoNb Steel by Gas Oxynitriding

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A.R. Dowling, C.H.A. Townley, The effects of defects on structural failure: a two-criteria approach. Int J Pressure Vessels Piping 3, 77–107 (1975)CrossRef

S. Jallouf, G. Pluvinage G, K. Casavola, C. Pappalettere, A probabilistic fatigue assessment diagram to get a guaranteed lifetime with a low probability of failure. Procedia Structural Integrity 2, 2447–2455 (2016)

S. Jallouf, C. Schmitt, G.A. Pluvinage, Probabilistic safety factor for defect assessment of water pipes subjected to water hammer. J. Strain Anal. Eng. Des. 46(1), 14–26 (2011)CrossRef

Y.J. Chao, X. Zhang, Constraint effect in brittle fracture, ed by R.S. Piascik, J.C. Newman, Jr, D.E. Dowling. 27th National Symposium on Fatigue and Fracture, ASTM STP 1296 (American Society for Testing and Materials, Philadelphia, 1997), pp. 41–60

M.R. Ayatollahi, M.J. Pavier, D.J. Smith, Mode I cracks subjected to large T-stresses. Int. J. Fract. 117(2), 159–174 (2002)CrossRef

Y.J. Chao, X. Zhang, Constraint effect in brittle fracture, ed by R.S. Piascik, J.C. Newman, Jr., D.E. Dowling. 27th National Symposium on Fatigue and Fracture, ASTM STP 1296 (American Society for Testing and Materials, Philadelphia, 1997) pp. 41–60

S.G. Larsson, A.J. Carlsson, Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials. J. Mech. Phys. Solids 21, 263–278 (1973)CrossRef

A. Elazzizi, M. Hadj Meliani, A. Khelil, G. Pluvinage, Y.G. Matvienko, The master failure curve of pipe steels and crack paths in connection with hydrogen embrittlement. Int. J. Hydrogen Energy 40(5), 2295–2302 (2015)CrossRef

R.A. Ainsworth, A constraint-based failure assessment diagram for fracture assessment. Int. J. Press. Vessels Pip. 64, 271–285 (1995)CrossRef

10.

S. Cravero, C. Ruggieri, Structural integrity analysis of axially cracked pipelines using conventional and constraint-modified failure assessment diagrams. Int. J. Press. Vessels Pip. 83, 607–617 (2006)CrossRef

11.

M. Mouwakeh, G. Pluvinage, S. Masri, Failure of water pipes containing surface cracks using limit analysis notions. Res. J. Aleppo Univ. Eng. Sci. Ser. 63, 79 (2011)

12.

B.S. Henry, A.R. Luxmore, The stress triaxiality constraint and the Q-value as a ductile fracture parameter. Eng. Fract. Mech. 57, 375–390 (1997)CrossRef

13.

Z. Chlup, I. Dlouhy, Micromechanical aspects of constraint effect at brittle fracture initiation, ed by I. Dlouhy. Transferability of fracture mechanical characteristics, vol 78, 65–78 (2002)

14.

M.H. Meliani, Y.G. Matvienko, G. Pluvinage, Two-parameter fracture criterion (Kρ, χ-Tef, c) based on notch fracture mechanics. Int. J. Fract. 167, 173–182 (2011)CrossRef

15.

G.P. Nikishkov, An algorithm and computer program for the three-term asymptotic expansion of elastic–plastic crack tip stress and displacement field. Eng. Frac. Mech. 50, 65–83 (1995)CrossRef

16.

S.G. Larsson, A.J. Carlsson, Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic–plastic materials. J. Mech. Phys. Solids. 1(21), 263–277 (1973)CrossRef

17.

G. Pluvinage, Notch effects in fatigue and Fracture (Editeur Kluwer, Paris, 2001)CrossRef

18.

B. Yang, K. Ravichandar, Evaluation of T stress by stress difference method. Eng. Fract Mech. 64, 589–605 (2001)CrossRef

19.

American National Standard Institute (ANSI)/American Society of Mechanical Engineers (ASME). Manual for determining strength of corroded pipelines, ASME B31G (1984)

20.

M.J. Maleski, M.S. Kirugulige, H.V. Tippur, A method for measuring mode I crack tip constraint under static and dynamic loading conditions. Soc. Exp. Mech. 44(5) 522–532 (2004)CrossRef

21.

SINTAP: Structural Integrity Assessment Procedure, Final Report EU project BE95-1462 Brite Euram Programme Brussels (1999)

22.

H. Adib-Ramezani, J. Jeong, G. Pluvinage, Structural integrity evaluation of X52 gas pipes subjected to external corrosion defects using the SINTAP procedure. Int. J. Press. Vessels Pip. 1–13 (2006)

23.

R. Dodds, C. Ruggieri, K. Koppenhefer, 3D Constraint effects on models for transferability of cleavage fracture toughness. ASTM 1321, 179–197 (1997)

24.

N.P. O’Dowd, C.F. Shih, Family of crack-tip fields characterized by a triaxiality parameter: Part I. Structure of Fields. J. Mech. Phys. Solids 39, 989–1015 (1991)CrossRef

Titel: Assessment of Pipe Defects Using a Constraint-Modified Failure Assessment Diagram
verfasst von: O. Bouledroua
M. Hadj Meliani
G. Pluvinage
Publikationsdatum: 01.02.2017
Verlag: Springer US
Erschienen in: Journal of Failure Analysis and Prevention / Ausgabe 1/2017
Print ISSN: 1547-7029
Elektronische ISSN: 1864-1245
DOI: https://doi.org/10.1007/s11668-016-0221-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1/2017

Visualizing Residual Stresses in Plastic and Glass

Characterization of Failure Behavior in Distorted WC-Co Tip of Coal Mining Picks

Grade P110 Tubing Shredded by Downhole Detonation

Operating Environment-Based Availability Importance Measures for Mining Equipment (Case Study: Sungun Copper Mine)

Professional Resources

Events

Premium Partner

Marktübersichten