nach oben

Steel in Translation

Erschienen in:

01.10.2023

Assessment of the Manufacturability of Materials Resistant to Long-Term Exposure to Aggressive Environments Used in the Production and Repair of Machines

verfasst von: N. Yu. Bulabaeva-Klimova, T. A. Guzeva, G. V. Malysheva

Erschienen in: Steel in Translation | Ausgabe 10/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The assessment of manufacturability of fiberglass parts in small-scale and repair production is presented. The objects of study are materials based on epoxy binders, the curing of which occurs at elevated temperatures. To compare the manufacturability of various molding processes, composites based on dispersed fillers and thermoplastic matrices are also considered. The results of expert assessments of manufacturability are presented, which show that molding processes, consisting of technological operations that are similar in content, differ significantly from each other in cost and material intensity.

Vorheriger Artikel On the Issue of Recrystallization Annealing of Dynamo Steel

Nächster Artikel The Importance of Studying Markov Processes in the Course of Studying Mathematical Models of a Technical System at the Stages of Diagnostics and Repair

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nelyub, V.A., Frantsev, M.E., and Borodulin, A.S., Tekhnologiya proizvodstva malotonnazhnykh sudov iz kompozitsionnykh materialov (Technology of Manufacturing Low-Tonnage Vessels Made of Composite Materials), Moscow: Izd-vo Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2021.

Kosenko, E.A., Baurova, N.I., and Zorin, V.A., Prirodopodobnye materialy i konstruktsii v mashinostroenii. Monografiya (Biomimetic Materials and Structures in Mechanical Engineering), Moscow: Mosk. Avtodorozhnyi Inst., 2020.

Bazhenov, S.L., Bazhenov, S.L., Berlin, A.A., Kul’kov, A.A., and Oshmyan, V.G., Polimernye kompozitsionnye materialy (Polymer Composite Materials), Dolgoprudnyi, Moscow oblast: Intellekt, 2010.

Tekhnologiya proizvodstva izdelii i integral’nykh konstruktsii iz kompozitsionnykh materialov v mashinostroenii (Technology of Producing Products and Integral Structures Made of Composite Materials in Mechanical Engineering), Bratukhin, A.G., Bogolyubov, V.S., and Sirotkin, O.S., Eds., Moscow: Gotika, 2003.

Maung, P.P., Htet, T.L., and Malysheva, G.V., Simulation and optimization of vacuum assisted resin infusion process for large-sized structures made of carbon fiber-reinforced plastics, IOP Conf. Ser.: Mater. Sci. Eng., 2020, vol. 709, no. 2, p. 022041. https://doi.org/10.1088/1757-899x/709/2/022041

Kobets, L.P., Borodulin, A.S., and Malysheva, G.V., Study of Microcapillary Impregnation of Carbon Fibres by Epoxy Binders, Fibre Chem., 2016, vol. 48, no. 4, pp. 311–315. https://doi.org/10.1007/s10692-017-9788-8CrossRef

Baurova, N.I., Surface structure of fractured carbon-fiber composites before and after climatic aging, Fibre Chem., 2014, vol. 46, no. 4, pp. 241–244. https://doi.org/10.1007/s10692-014-9597-2CrossRef

Baurova, N.I. and Sergeev, A.Yu., Structural studies of fracture patterns in adhesive joints after pullout testing, Polym. Sci. Ser. D, 2014, vol. 7, no. 4, pp. 298–302. https://doi.org/10.1134/s1995421214040030CrossRef

Konoplin, A.Yu. and Baurova, N.I., Hardness of the near-weld zone during contact spot welding of steels using an adhesive–weld technology, Russ. Metall., 2016, vol. 2016, no. 13, pp. 1308–1311. https://doi.org/10.1134/s0036029516130097CrossRefADS

10.

Bodrykh, N.V. and Malysheva, G.V., Repair of starter storage batteries, Polym. Sci., Ser. D, 2010, vol. 3, no. 1, pp. 70–73. https://doi.org/10.1134/s1995421210010144CrossRef

11.

Zorin, V.A., Baurova, N.I., and Pegachkov, A.A., Assessment of products risks of mechanical engineering by results of diagnosing, Periodicals Eng. Nat. Sci., 2019, vol. 7, no. 1, pp. 287–293. https://doi.org/10.21533/pen.v7i1.391CrossRef

12.

Rudskoi, A.I. and Baurova, N.I., Technological heredity during the production and operation of structural materials, Russ. Metall., 2019, vol. 2019, no. 13, pp. 1378–1383. https://doi.org/10.1134/s0036029519130317CrossRefADS

13.

Baurova, N.I., A method of imitational modeling that permits optimizing the properties of polymeric composite materials, Polym. Sci., Ser. D, 2013, vol. 6, no. 3, pp. 265–268. https://doi.org/10.1134/s1995421213030039CrossRef

14.

Yanyan, Ch., Nelyub, V.A., and Malysheva, G.V., An investigation of the kinetics of the heating process for parts made of carbon fiber in the process of curing, Polym. Sci., Ser. D, 2019, vol. 12, no. 3, pp. 296–299. https://doi.org/10.1134/s1995421219030055CrossRef

15.

Shimina, Yu.Yu. and Malysheva, G.V., Determination of failure-free operation probability in adhesive joints at high temperatures, Polym. Sci. Ser. D, 2015, vol. 8, no. 3, pp. 207–210. https://doi.org/10.1134/s1995421215030120CrossRef

16.

Nelyub, V.A. and Borodulin, A.S., Properties of epoxy materials used for production of glass-reinforced plastics by the winding method, Polym. Sci., Ser. D, 2018, vol. 11, no. 2, pp. 147–153. https://doi.org/10.1134/s1995421218020132CrossRef

17.

Nelyub, V.A., Gorberg, B.L., Grishin, M.V., Sarvadii, S.Yu., Shub, B.R., Berlin, A.A., and Malysheva, G.V., Properties and technology of applying metal coatings to carbon tape, Fibre Chem., 2019, vol. 50, no. 6, pp. 524–527. https://doi.org/10.1007/s10692-019-10022-7CrossRef

18.

Dal’skii, A.M., Tekhnologicheskaya nasledstvennost’ v mashinostroitel’nom proizvodstve (Technological Heredity in Machinery Manufacture), Moscow: Mosk. Aviats. Inst., 2000.

19.

Tekhnologiya mashinostroeniya. V 2 tomakh (Mechanical Engineering in Two Volumes), vol. 1: Osnovy tekhnologii mashinostroeniya. Uchebnik dlya vuzov (Foundations of the Mechanical Engineering: Textbook for Universities), Dal’skii, A.M., Ed., Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 1997.

20.

Sagalaev, G.V., Abramov, V.V., Kuleznev, V.N., et al., Spravochnik po tekhnologii izdelii iz plastmass (Reference Book on Technology of Products Mades of Plastics), Moscow: Khimiya, 2000.

21.

Kartashova, V.V. and Baurova, N.I., A study of the performance characteristics of coatings used for treating inner surfaces of road-machine working tools, Polym. Sci., Ser. D, 2019, vol. 12, no. 4, pp. 435–439. https://doi.org/10.1134/s1995421219040063CrossRef

22.

Kartashova, V.V. and Baurova, N.I., A study of the resistance of polymer coatings for the working equipment of road machinery to the effect of climatic factors, Polym. Sci., Ser. D, 2020, vol. 13, no. 2, pp. 214–218. https://doi.org/10.1134/s1995421220020100CrossRef

23.

Tekhnicheskie svoistva polimernykh materialov. Uchebno- spravochnoe posobie (Engineering Properties of Polymer Materials: Reference and Instructional Book), Kryzhanovskii, V.K. , Eds., St. Petersburg: Professiya, 2005, 2nd ed.

Titel: Assessment of the Manufacturability of Materials Resistant to Long-Term Exposure to Aggressive Environments Used in the Production and Repair of Machines
verfasst von: N. Yu. Bulabaeva-Klimova
T. A. Guzeva
G. V. Malysheva
Publikationsdatum: 01.10.2023
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 10/2023
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091223100066

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2023

Metallurgical Properties of Pellets from Stoilenskii Deposit Concentrates

Increasing the Reliability of Corrosion Protection of Steel Products with Zinc Coatings by Nitriding

Particular Features of the Distribution of Nonmetallic Inclusions in a Continuously Cast Low-Alloy Steel Ingot

Scheme Misalignment of Axes of Work Rolls with Support on Rolls with Barrel Surface in the Form of a One-Sheet Hyperboloid

Properties and Structure Control of Hot-Worked Vessels by Varying the Cooling Media at the Outlet of the Rolling-Press Line

Simulation of the Deformation Zone and Stress-Strain State during Screw Rolling of Billets from Hard-Deformed Alloy

Premium Partner

Marktübersichten