nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Assurance of Accuracy of Longitudinal Section of Profile Surfaces Milled at High Feeds

verfasst von : A. A. Fomin, V. G. Gusev, A. R. Sadrtdinov

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article considers the process of profile milling of extended surfaces with shaping cutters and independent factors determining the dominant influence on the optimization parameter as well as the deviation of the longitudinal section profile of the product. One-factor experiments were conducted on the basis of which the operating conditions of the technological system were further determined under which the processing process proceeds steadily with a minimum level of vibration. Under these operating conditions of the technological system, multifactorial experiments were performed. The multifactorial experimental model of the optimization parameter as a function of the elements of the cutting mode was obtained on the basis of which the deviation of the profile of the longitudinal section was simulated in a wide range of values of the independent factors of the profile milling process. The statistical processing of the data of the planned and realized multifactor experiment was carried out, the multifactor model was tested for adequacy and its graphical interpretation was presented which allowed obtaining the scientific data necessary for the well-founded construction of intensive operations of workpiece profile milling.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Mathematical Model of Cut Layer at Intensive Profile Milling of Workpieces

Nächstes Kapitel Dynamics of Rotary Milling According to Group Scheme of Obtaining Discontinuous Chips

Jawahir IS, Van Luttervelt CA (1993) Recent developments in chip control research and applications. CIRP Ann Manuf Technol 42(2):659–693. https://doi.org/10.1016/S0007-8506(07)62531-1CrossRef

Vorburger TV, Teague EC (1981) Optical techniques for on-line measurement of surface topography. Precis Eng 3(2):61–83. https://doi.org/10.1016/0141-6359(81)90038-6CrossRef

Fomin AA (2013) Kinematics of surface formation in milling. Russ Eng Res 33(11):660–662CrossRef

Drapalyuk MV et al (2016) Modeling the digging process of tree root system by the mechanism with hydropulse drive. IOP Conf Ser Mater Sci Eng 142:012090. https://doi.org/10.1088/1757-899X/142/1/012090CrossRef

Young RD, Vorburger TV, Teague EC (1980) In-process and on-line measurement of surface finish. CIRP Ann Manuf Technol 29(1):435–440. https://doi.org/10.1016/S0007-8506(07)61366-3CrossRef

Xiang Su et al (2016) Predictive model of milling force for complex profile milling. Int J Adv Manuf Technol 87(5–8):1653–1662

Fomin AA (2017) Microgeometry of surfaces after profile milling with the use of automatic cutting control system. In: Proceedings of 2017, ICIEAM 2017, art. no. 8076117. https://doi.org/10.1109/icieam.2017.8076117

Ohuchi T, Murase YJ (2005) Milling of wood and wood-based materials with a computerized numerically controlled router IV: development of automatic measurement system for cutting edge profile of throw-away type straight bit. Wood Sci 51:278. https://doi.org/10.1007/s10086-004-0663-xCrossRef

Stepanov VV et al (2017) Composite material for railroad tie. Solid State Phenom 265:587–591. https://doi.org/10.4028/www.scientific.net/SSP.265.587CrossRef

10.

Rehbinder PA, Shchukin ED (1972) Surface phenomena in solids during deformation and fracture processes. Prog Surf Sci 3:97–188. https://doi.org/10.1016/0079-6816(72)90011-1CrossRef

11.

Zhou Y, Chen ZC, Tang J, Liu S (2016) An innovative approach to NC programming for accurate five-axis flank milling of spiral bevel or hypoid gears. Comput Aided Des 84:15–24. https://doi.org/10.1016/j.cad.2016.11.003MathSciNetCrossRef

12.

Gusev VG, Fomin AA, Sadrtdinov AR (2017) Dynamics of stock removal in profile milling process by shaped tool. Procedia Eng 206:279–285CrossRef

13.

Su X et al (2016) Predictive model of milling force for complex profile milling. Int J Adv Manuf Technol 87(5):1653–1662. https://doi.org/10.1007/s00170-016-8589-1CrossRef

14.

Safin R et al (2016) A mathematical model of thermal decomposition of wood in conditions of fluidized bed. Acta Facultatis Xylologiae Zvolen res Publica Slovaca 58(2):141–148. https://doi.org/10.17423/afx.2016.58.2.15MathSciNetCrossRef

15.

Banerjee A, Feng HY, Bordatchev EV (2012) Int J Adv Manuf Technol 59:21. https://doi.org/10.1007/s00170-011-3478-0CrossRef

16.

Timerbaev NF, Sadrtdinov AR, Safin RG (2017) Software systems application for shafts strength analysis in mechanical engineering. Procedia Eng 206:1376–1381. https://doi.org/10.1016/j.proeng.2017.10.648CrossRef

17.

Popov IA et al (2015) Cooling systems for electronic devices based on the ribbed heat pipe. Russ Aeronaut (Iz VUZ) 58(3):309–314CrossRef

18.

Song G, Li J, Sun J (2013) Int J Adv Manuf Technol 68:1429. https://doi.org/10.1007/s00170-013-4932-yCrossRef

19.

Fomin AA (2017) Determining undeformed chip thickness models in milling and its verification during wood processing. Solid State Phenom 265:598–605CrossRef

20.

Nakagawa T, Yuzawa T, Sampei M, Hirata A (2017) Improvement in machining speed with working gap control in EDM milling. Precis Eng 47:303–310. https://doi.org/10.1016/j.precisioneng.2016.09.004CrossRef

21.

Prosvirnikov DB et al (2017) IOP Conf Ser Mater Sci Eng 221.1:012009. https://doi.org/10.1088/1755-1315/221/1/012009CrossRef

22.

Timerbaev NF et al (2017) Gas purification system modeling in fatty acids removing from soapstock. In: Proceedings of 2017, ICIEAM 2017, art. no. 8076418. https://doi.org/10.1109/icieam.2017.8076418

23.

Gusev VG, Fomin AA (2017) Multidimensional model of surface waviness treated by shaping cutter. Procedia Eng 206:286–292CrossRef

24.

Kolenchenko OV (2010) Influence of the milling conditions on the deformation and quality of the machined surface. Russ Eng Res 30(8):839–844CrossRef

25.

Novák V, Rousek M, Kopecký Z (2011) Assessment of wood surface quality obtained during high speed milling by use of non-contact method. Drvna industrija 62(2):105–113CrossRef

26.

Lashkov VA et al (2016) IOP Conf Ser Mater Sci Eng 124:012111. https://doi.org/10.1088/1757-899X/124/1/012111CrossRef

27.

Volkov DI, Koryazhkin AA (2012) Russ Eng Res 32:698. https://doi.org/10.3103/S1068798X12070258CrossRef

28.

Prosvirnikov DB et al (2017) Modelling heat and mass transfer processes in capillary-porous materials at their grinding by pressure release. In: Proceedings of 2017, ICIEAM 2017, art. no. 8076443. https://doi.org/10.1109/icieam.2017.8076443

29.

Tuntsev DV et al (2016) The mathematical model of fast pyrolysis of wood waste. In: Proceedings of 2015, MEACS 2015. art. no. 7414929. https://doi.org/10.1109/meacs.2015

30.

Fomin AA (2017) Limiting product surface and its use in profile milling design operations. Solid State Phenom 265:672–678. https://doi.org/10.4028/www.scientific.net/SSP.265.672CrossRef

31.

Popov IA, Shchelchkov AV, Gortyshov YF et al (2017) High Temp 55(4):524. https://doi.org/10.1134/S0018151X17030208CrossRef

32.

Timerbaev NF et al (2017) Application of software solutions for modeling and analysis of parameters of belt drive in engineering. IOP Conf Ser Earth Environ Sci 87(8):082047. https://doi.org/10.1088/1755-1315/87/8/082047CrossRef

33.

Fomin AA, Gusev VG (2013) Safe machining of blanks with nonuniform properties. Russ Eng Res 33(10):602–606. https://doi.org/10.3103/S1068798X13100043CrossRef

34.

Safin RG et al (2017) Technology of wood waste processing to obtain construction material. Solid State Phenom 265:245–249. https://doi.org/10.4028/www.scientific.net/SSP.265.245CrossRef

35.

Anisimova IV, Gortyshov YF, Ignat’ev VN (2016) Russ Aeronaut 59:414

36.

Volkov DI, Koryazhkin AA (2014) Adaptive belt grinding of gas-turbine blades. Russ Eng Res 34(1):37–40CrossRef

37.

Ovcharenko VE, Ivanov KV, Ivanov YF et al (2017) Russ Phys J 59:2114. https://doi.org/10.1007/s11182-017-1022-xCrossRef

Titel: Assurance of Accuracy of Longitudinal Section of Profile Surfaces Milled at High Feeds
verfasst von: A. A. Fomin
V. G. Gusev
A. R. Sadrtdinov
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_55

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht