nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Mathematical Model of Cut Layer at Intensive Profile Milling of Workpieces

verfasst von : V. G. Gusev, A. A. Fomin, V. A. Saldaev

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The tendency of development of mechanical processing of materials is considered, and the continuous increase of cutting and feeding speeds is noted during the removal of stock. The increase in cutting modes by one or two orders leads to the inadequacy of the existing mathematical models of the parameters of the cut layer, and to a significant discrepancy between the calculation results and the experimental data. To improve the design of intensive technological processes, new mathematical models for calculating the parameters of the cut layer, suitable for cylindrical, profile milling of wood, are developed in the article providing the adequate results of calculations regardless of the level of the assigned cutting modes. The graphs of the dependence of the parameters of the cut layer on independent factors characterizing the intensive milling modes are presented, they are necessary for the development of intensive technological processes of cylindrical and profile milling.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Analysis of Application of Pre-screwed Auger Wheels for Operative Increasing of Throughput Capacity of Oil Pipelines

Nächstes Kapitel Assurance of Accuracy of Longitudinal Section of Profile Surfaces Milled at High Feeds

Azemović E, Horman I, Busuladžić I (2014) Impact of planing treatment regime on solid fir wood surface. Procedia Eng 69:1490–1498CrossRef

Novák V, Rousek M, Kopecký Z (2011) Assessment of wood surface quality obtained during high speed milling by use of non-contact method. Drvna Industrija 62(2):105–113CrossRef

Drapalyuk MV et al (2016) Modeling the digging process of tree root system by the mechanism with hydropulse drive. IOP Conf Ser Mater Sci Eng 142:012090. https://doi.org/10.1088/1757-899X/142/1/012090CrossRef

Young RD, Vorburger TV, Teague EC (1980) In-process and on-line measurement of surface finish. CIRP Ann Manuf Technol 29(1):435–440. https://doi.org/10.1016/S0007-8506(07)61366-3CrossRef

Ovcharenko VE, Mokhovikov AA, Ignat’ev AS (2013) Influence of surface nanostructure on the life of cermet in metal cutting. Steel Transl 43:348. https://doi.org/10.3103/s0967091213060144CrossRef

Fomin AA (2017) Microgeometry of surfaces after profile milling with the use of automatic cutting control system. In: Proceedings of 2017, ICIEAM 2017, art. no. 8076117. https://doi.org/10.1109/icieam.2017.8076117

Ohuchi T, Murase YJ (2005) Milling of wood and wood-based materials with a computerized numerically controlled router IV: development of automatic measurement system for cutting edge profile of throw-away type straight bit. Wood Sci 51:278. https://doi.org/10.1007/s10086-004-0663-xCrossRef

Stepanov VV et al (2017) Composite material for railroad tie. Solid State Phenom 265:587–591. https://doi.org/10.4028/www.scientific.net/SSP.265.587CrossRef

Safin RG et al (2017) Technology of wood waste processing to obtain construction material. Solid State Phenom 265:245–249. https://doi.org/10.4028/www.scientific.net/SSP.265.245CrossRef

10.

Ovcharenko VE, Ivanov KV, Ivanov YF et al (2017) Modification of the structural-phase state of the surface layer of a cermet composite under electron beam irradiation in inert gas plasmas. Russ Phys J 59:2114. https://doi.org/10.1007/s11182-017-1022-xCrossRef

11.

Gusev VG, Fomin AA, Sadrtdinov AR (2017) Dynamics of stock removal in profile milling process by shaped tool. Procedia Eng 206:279–285CrossRef

12.

Su X et al (2016) Predictive model of milling force for complex profile milling. Int J Adv Manuf Technol 87(5):1653–1662. https://doi.org/10.1007/s00170-016-8589-1CrossRef

13.

Timerbaev NF et al (2017) Application of software solutions for modeling and analysis of parameters of belt drive in engineering. IOP Conf Ser Earth Environ Sci 87(8):082047. https://doi.org/10.1088/1755-1315/87/8/082047CrossRef

14.

Banerjee A, Feng HY, Bordatchev EV (2012) Geometry of chip formation in circular end milling. Int J Adv Manuf Technol 59:21. https://doi.org/10.1007/s00170-011-3478-0CrossRef

15.

Timerbaev NF, Sadrtdinov AR, Safin RG (2017) Software systems application for shafts strength analysis in mechanical engineering. Procedia Eng 206:1376–1381. https://doi.org/10.1016/j.proeng.2017.10.648CrossRef

16.

Prosvirnikov DB et al (2017) Mechanization of continuous production of powdered cellulose technology. IOP Conf Ser Mater Sci Eng 221(1):012010. https://doi.org/10.1088/1755-1315/221/1/012010CrossRef

17.

Popov IA et al (2015) Cooling systems for electronic devices based on the ribbed heat pipe. Russ Aeronaut (Iz VUZ) 58(3):309–314CrossRef

18.

Song G, Li J, Sun J (2013) Approach for modeling accurate undeformed chip thickness in milling operation. Int J Adv Manuf Technol 68:1429. https://doi.org/10.1007/s00170-013-4932-yCrossRef

19.

Fomin AA (2017) Determining undeformed chip thickness models in milling and its verification during wood processing. Solid State Phenom 265:598–605CrossRef

20.

Banerjee A, Feng HY, Bordatchev EV (2012) Geometry of chip formation in circular end milling. Int J Adv Manufact Technol 59(1–4):21–35. https://doi.org/10.1007/s00170-011-3478-0CrossRef

21.

Prosvirnikov DB et al (2017) Modeling of delignification process of activated wood and equipment for its implementation. IOP Conf Ser Mater Sci Eng 221(1):012009. https://doi.org/10.1088/1755-1315/221/1/012009CrossRef

22.

Timerbaev NF et al (2017) Gas purification system modeling in fatty acids removing from soapstock. In: Proceedings of 2017, ICIEAM 2017, art. no. 8076418. https://doi.org/10.1109/icieam.2017.8076418

23.

Gusev VG, Fomin AA (2017) Multidimensional model of surface waviness treated by shaping cutter. Procedia Eng 206:286–292CrossRef

24.

Fomin AA, Gusev VG (2013) Safe machining of blanks with nonuniform properties. Russ Eng Res 33(10):602–606. https://doi.org/10.3103/S1068798X13100043CrossRef

25.

Prosvirnikov DB et al (2017) Modelling heat and mass transfer processes in capillary-porous materials at their grinding by pressure release. In: Proceedings of 2017, ICIEAM 2017, art. no. 8076443. https://doi.org/10.1109/icieam.2017.8076443

26.

Popov IA, Shchelchkov AV, Gortyshov YF et al (2017) Heat transfer enhancement and critical heat fluxes in boiling of microfinned surfaces. High Temp 55(4):537–548. https://doi.org/10.1134/S0018151X17030208CrossRef

Titel: Mathematical Model of Cut Layer at Intensive Profile Milling of Workpieces
verfasst von: V. G. Gusev
A. A. Fomin
V. A. Saldaev
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_54

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht