nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Automated 3D Scanning Device for the Production of Forearm Prostheses and Orthoses

verfasst von : M. C. de Oliveira, M. C. de Araújo, M. G. N. M. da Silva

Erschienen in: XXVII Brazilian Congress on Biomedical Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Commercial prostheses and orthoses are expensive and have a slow fabrication process that causes patient discomfort. This paper describes the development of an automated 3D scanning system that can reduce the time and production cost of 3D printed forearm prostheses and orthoses. The system is composed of a rotational axis and 3D scanner support, enabling the precise scanning of body parts with a shorter acquisition time and less image processing compared to existing methods. Measurements were performed to analyze the accuracy of the device. The results showed that the system obtains accurate molds of the forearm, with Technical Error of Measurement between 0.12 and 0.25%, threefold smaller measurement error than the maximum accepted value. The proposed method offers a higher number of personalization possibilities at a lower production cost, due to the use of 3D printing techniques, thereby promoting greater social inclusion.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Differences in Respiratory Mechanics in Emphysema and Chronic Bronchitis Evaluated by Forced Oscillations

Nächstes Kapitel Low Amplitude Hand Rest Tremor Assessment in Parkinson’s Disease Based on Linear and Nonlinear Methods

Dvorznak M, Fitzpatrick K, Karmarkar A, Kelleher A, McCann T (2007) Orthotic devices. In: Cooper RA, Ohnabe H, Hobson DA (eds) An introduction to rehabilitation engineering. Taylor & Francis, pp 261–285

Monteiro Peixoto A, Zimpel SA, lves de Oliveira AC, Souza Monteiro RL, Gomes Carneiro TK (2017) Prevalence of upper and lower limb amputations of SUS patients in the state of Alagoas between 2008 and 2015. Fisioter e Pesqui. https://doi.org/10.1590/1809-2950/17029524042017

Collins DM, Dicianno B, Karmarkar A, Pasquina PF, Relich R, Kelleher A (2007) Major limb prosthetic devices. In: Cooper RA, Ohnabe H, Hobson DA (eds) An introduction to rehabilitation engineering. Taylor & Francis, pp 239–260

Wukich DK (2015) Diabetes and its negative impact on outcomes in orthopaedic surgery. World J Orthop 6:331. https://doi.org/10.5312/wjo.v6.i3.331CrossRef

Biddiss E, Chau T (2007) Upper limb prosthesis use and abandonment: a survey of the last 25 years. Prosthet Orthot Int. https://doi.org/10.1080/03093640600994581CrossRef

Colombo G, Bertetti M, Bonacini D, Magrassi G (2006) Reverse engineering and rapid prototyping techniques to innovate prosthesis socket design. In: Three-dimensional image capture applications VII. https://doi.org/10.1117/12.644175

Pezzin LE, Dillingham TR, MacKenzie EJ, Ephraim P, Rossbach P (2004) Use and satisfaction with prosthetic limb devices and related services. Arch Phys Med Rehabil 85(5):723–729CrossRef

Resnik L, Meucci MR, Lieberman-Klinger S et al (2012) Advanced upper limb prosthetic devices: implications for upper limb prosthetic rehabilitation. Arch Phys Med Rehabil 93(4):710–717CrossRef

Koutny D, Palousek D, Koutecky T, Zatocilova A, Rosicky J, Janda M (2012) 3D digitalization of the human body for use in orthotics and prosthetics. World Acad Sci Eng Technol 72:1487–1494

10.

De Souza MA, Schmitz C, Pinhel MM, Setti JAP, Nohama P (2017) Proposal of custom made wrist orthoses based on 3D modelling and 3D printing. In: Proceedings of the annual international conference of the IEEE engineering in medicine and biology society (EMBS), pp 3789–3792. https://doi.org/10.1109/EMBC.2017.8037682

11.

Haleem A, Javaid M (2019) 3D scanning applications in medical field: a literature-based review. Clin Epidemiol Glob Heal. https://doi.org/10.1016/j.cegh.2018.05.006CrossRef

12.

Commean PK, Smith KE, Vannier MW (1996) Design of a 3-D surface scanner for lower limb prosthetics: a technical note. J Rehabil Res Dev

13.

Munhoz R, da Moraes CAC, Tanaka H, Kunkel ME (2016) A digital approach for design and fabrication by rapid prototyping of orthosis for developmental dysplasia of the hip. Rev Bras Eng Biomed. https://doi.org/10.1590/2446-4740.00316

14.

Cui Y, Stricker D (2011) 3D shape scanning with a kinect. ACM SIGGRAPH 2011 Posters, SIGGRAPH’11. https://doi.org/10.1145/2037715.2037780

15.

Tong J, Zhou J, Liu L, Pan Z, Yan H (2012) Scanning 3D full human bodies using kinects. IEEE Trans Vis Comput Graph. https://doi.org/10.1109/TVCG.2012.56CrossRef

16.

Bragança S, Arezes P, Carvalho M, Ashdown SP, Castellucci I, Leão C (2018) A comparison of manual anthropometric measurements with Kinect-based scanned measurements in terms of precision and reliability. Work. https://doi.org/10.3233/WOR-182684CrossRef

17.

Remondino F (2011) Heritage recording and 3D modeling with photogrammetry and 3D scanning. Remote Sens. https://doi.org/10.3390/rs3061104CrossRef

18.

Ryniewicz AM, Ryniewicz A, Bojko Ł, Gołębiowska W, Cichoński M, Madej T (2017) The use of laser scanning in the procedures replacing lower limbs with prosthesis. Meas J Int Meas Confed. https://doi.org/10.1016/j.measurement.2017.07.041CrossRef

19.

Santagati C, Inzerillo L, Di Paola F (2013) Image-based modeling techniques for architectural heritage 3d digitalization: limits and potentialities. ISPRS—International archives of the photogrammetry, remote and sensing and spatial information sciences. https://doi.org/10.5194/isprsarchives-xl-5-w2-555-2013

20.

Schwarz-Müller F, Marshall R, Summerskill S (2018) Development of a positioning aid to reduce postural variability and errors in 3D whole body scan measurements. Appl Ergon. https://doi.org/10.1016/j.apergo.2017.11.001CrossRef

21.

Löffler-Wirth H, Willscher E, Ahnert P, Wirkner K, Engel C, Loeffler M et al (2016) Novel anthropometry based on 3D-bodyscans applied to a large population based cohort. PLoS ONE. https://doi.org/10.1371/journal.pone.0159887CrossRef

22.

Jaeschke L, Steinbrecher A, Pischon T (2015) Measurement of waist and hip circumference with a body surface scanner: feasibility, validity, reliability, and correlations with markers of the metabolic syndrome. PLoS ONE. https://doi.org/10.1371/journal.pone.0119430CrossRef

23.

Vitali A, Colombo G, Regazzoni D, Rizzi C (2019) Virtual prototyping and physical experimentation of lower limb prosthesis. In: Proceedings of the 5th workshop on ICTs for improving patients rehabilitation research techniques, pp 111–117

24.

Dessery Y, Pallari J (2018) Measurements agreement between low-cost and high-level handheld 3D scanners to scan the knee for designing a 3D printed knee brace. PLoS ONE 13(1):CrossRef

25.

Regazzoni D, Vitali A, Rizzi C, Colombo G (2019) A virtual platform for lower limb prosthesis design and assessment. In: DHM and posturography. Academic Press, pp 733–746

26.

Norton K, Marfell-Jones M, Whittingham N, Kerr D, Carter JEL, Saddington K, Gore C (2000) Anthropometric assessment protocols, chapter 5. In: Gore CJ (ed) Physiological tests for elite athletes, vol Ill. Human Kinetics, Champaign, pp 66–85. ISBN 0-7360-0326-6

27.

Brehm MA, Harlaar J, Schwartz M (2008) Effect of ankle-foot orthoses on walking efficiency and gait in children with cerebral palsy. J Rehabil Med. https://doi.org/10.2340/16501977-0209CrossRef

28.

Palousek D, Rosicky J, Koutny D (2014) Use of digital technologies for nasal prosthesis manufacturing. Prosthet Orthot Int. https://doi.org/10.1177/0309364613489333CrossRef

29.

He Y, Xue GH, Fu JZ (2014) Fabrication of low cost soft tissue prostheses with the desktop 3D printer. Sci Rep. https://doi.org/10.1038/srep06973CrossRef

Titel: Automated 3D Scanning Device for the Production of Forearm Prostheses and Orthoses
verfasst von: M. C. de Oliveira
M. C. de Araújo
M. G. N. M. da Silva
Verlag: Springer International Publishing
Buch: XXVII Brazilian Congress on Biomedical Engineering
Print ISBN: 978-3-030-70600-5

Electronic ISBN: 978-3-030-70601-2

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-70601-2_45

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence_ieS/© Springer Fachmedien Wiesbaden GmbH, Search Icon, Banner Hanser, Strompreise/© vejaa / stock.adobe.com, Bunte Männchen, die Kunden darstelle, werden von einem riesigen Magneten angezogen. /© Oleksiy Mark, Dr. Daniel Schneider/© Fraunhofer IESE, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.