nach oben

Applied Composite Materials

Erschienen in:

18.08.2022

Biocarbon Filled Hemp-Epoxy Composite: Its Physical, Mechanical, and Thermal Properties

verfasst von: Raj Kumar Dahal, Bishnu Acharya, Bob Dony, Animesh Dutta

Erschienen in: Applied Composite Materials | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Biocarbon in hemp composite alters its physical, thermal, and mechanical properties. Biocarbon from the spruce pellets was obtained at 450 °C through pyrolysis. 20 wt.% and 50 wt.% of biocarbon (below 53 microns particle size) were added to produce hemp fibre reinforced epoxy composite samples. The biocarbon in composite samples increased the glass transition temperature of the hemp-epoxy composites. Hemp fibre content is directly proportional to the resulting material’s impact energy. The impact energy of the hemp composites without biocarbon was 15 J/m, composite with 20 wt.% biocarbon was 10 J/m, and the composite with 50 wt.% biocarbon was 9 J/m. The hardness values of the composites without biochar, with 20 wt.% biochar and 50 wt.% biochar were 5.6, 16.3, and 23.7 HRLS, respectively. At saturation level, composite with no biochar was higher than the other two composites. 50wt.% biochar containing composite showed the least water absorbing behaviour.

Vorheriger Artikel Simulated Analysis of Lightning-induced Mechanical Damages in Fiber Reinforced Composites Based on a Pyrolysis-affected Damage Constitutive Model

Nächster Artikel Energy-absorption Characteristics of Nacre-inspired Carbon/Epoxy Composite Tubes under Impact Loading

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Clake, R., Lu, X.: The cultivation and use of hemp (Cannabis sativa L.) in ancient China. J. Int. Hemp. Assoc. 2, 26–30 (1995)

Amaducci, S.: Hemp production in Italy. J. Ind. Hemp. 10, 109–115 (2005). https://doi.org/10.1300/J237v10n01_09CrossRef

Ouarhim, W., Zari, N., Bouhfid, R., Qaiss, A.E.K.: Mechanical performance of natural fibers–based thermosetting composites. In: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, pp. 43–60. Elsevier (2019)CrossRef

Maino, A., Janszen, G., Di Landro, L.: Glass/Epoxy and Hemp/Bio based epoxy composites: Manufacturing and structural performances. Polym. Compos. 40, E723–E731 (2019). https://doi.org/10.1002/pc.24973CrossRef

Dahal, R.K., Acharya, B., Saha, G., Bissessur, R., Dutta, A., Farooque, A.: Biochar as a filler in glassfiber reinforced composites: Experimental study of thermal and mechanical properties. Compos. Part. B. Eng. 175, 107169 (2019). https://doi.org/10.1016/j.compositesb.2019.107169CrossRef

Cabanelas, J.: Water absorption in polyaminosiloxane-epoxy thermosetting polymers. J. Mater. Process. Technol. 143–144, 311–315 (2003). https://doi.org/10.1016/S0924-0136(03)00480-1CrossRef

Xiao, G.Z., Shanahan, M.E.R.: Water absorption and desorption in an epoxy resin with degradation. J. Polym. Sci. Part. B. Polym. Phys. 35, 2659–2670 (1997). https://doi.org/10.1002/(SICI)1099-0488(19971130)35:16%3C2659::AID-POLB9%3E3.0.CO;2-K

Zhu, S., Guo, Y., Chen, Y., Liu, S.: Low Water Absorption, High-Strength Polyamide 6 Composites Blended with Sustainable Bamboo-Based Biochar. Nanomaterials 10, 1367 (2020). https://doi.org/10.3390/nano10071367CrossRef

Shahzad, A.: A Study in Physical and Mechanical Properties of Hemp Fibres. Adv. Mater. Sci. Eng. 2013, 1–9 (2013). https://doi.org/10.1155/2013/325085CrossRef

10.

Yousefi, S.R., Ghanbari, D., Niasari, M.S.: Hydrothermal Synthesis of Nickel Hydroxide Nanostructures and Flame Retardant Poly Vinyl Alcohol and Cellulose Acetate Nanocomposites. J. Nanostruct. 6, 77–82 (2016)

11.

Ikram, S., Das, O., Bhattacharyya, D.: A parametric study of mechanical and flammability properties of biochar reinforced polypropylene composites. Compos. Part. A Appl. Sci. Manuf. 91, 177–188 (2016). https://doi.org/10.1016/j.compositesa.2016.10.010CrossRef

12.

Behazin, E., Misra, M., Mohanty, A.K.: Sustainable biocarbon from pyrolyzed perennial grasses and their effects on impact modified polypropylene biocomposites. Compos. Part. B. Eng. 118, 116–124 (2017). https://doi.org/10.1016/j.compositesb.2017.03.003CrossRef

13.

Zhang, Q., Cai, H., Ren, X., Kong, L., Liu, J., Jiang, X.: The Dynamic Mechanical Analysis of Highly Filled Rice Husk Biochar/High-Density Polyethylene Composites. Polymers. 9, 628 (2017). https://doi.org/10.3390/polym9110628CrossRef

14.

Prasad, B.M., Sain, M.M.: Mechanical properties of thermally treated hemp fibers in inert atmosphere for potential composite reinforcement. Mater. Res. Innov. 7, 231–238 (2003). https://doi.org/10.1007/s10019-003-0258-yCrossRef

15.

Ervina, J., Mariatti, M., Hamdan, S.: Effect of Filler Loading on the Tensile Properties of Multi-walled Carbon Nanotube and Graphene Nanopowder filled Epoxy Composites. Procedia. Chem. 19, 897–905 (2016). https://doi.org/10.1016/j.proche.2016.03.132CrossRef

16.

Ceramic Fibers and Coatings: Advanced Materials for the Twenty-First Century Volume 494 of Publication NMAB Authors Committee on Advanced Fibers for High-Temperature Ceramic Composites, Commission on Engineering and Technical Systems, National Materials Advisory Board, Division on Engineering and Physical Sciences, National Research Council Publisher National Academies Press, (1998) ISBN0309569036, 9780309569033

17.

Fiore, V., Sanfilippo, C., Calabrese, L.: Influence of sodium bicarbonate treatment on the aging resistance of natural fiber reinforced polymer composites under marine environment. Polym. Test. 80, 106100 (2019). https://doi.org/10.1016/j.polymertesting.2019.106100CrossRef

18.

Wambua, P., Ivens, J., Verpoest, I.: Natural fibres: can they replace glass in fibre reinforced plastics?. Compos. Sci. Technol. New York Journal. 63, 1259–1264 (2003). https://doi.org/10.1016/S0266-3538(03)00096-4

19.

Rehman, M.M., Zeeshan, M., Shaker, K., Nawab, Y.: Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite. Cellulose 26, 9057–9069 (2019). https://doi.org/10.1007/s10570-019-02679-4CrossRef

20.

Nascimento, L.F.C., Monteiro, S.N., Louro, L.H.L., da Luz, F.S., dos Santos, J.L., de Oliveira Braga, F., Marçal, R.L.S.B.: Charpy impact test of epoxy composites reinforced with untreated and mercerized mallow fibers. J. Mater. Res. Technol. 7, 520–527 (2018). https://doi.org/10.1016/j.jmrt.2018.03.008CrossRef

21.

22.

Canché-Escamilla, G., Rodriguez-Laviada, J., Cauich-Cupul, J., Mendizábal, E., Puig, J., Herrera-Franco, P.: Flexural, impact and compressive properties of a rigid-thermoplastic matrix/cellulose fiber reinforced composites. Compos. Part. A Appl. Sci. Manuf. 33, 539–549 (2002). https://doi.org/10.1016/S1359-835X(01)00136-1CrossRef

23.

Ray, D., Sarkar, B., Bose, N.: Impact fatigue behaviour of vinylester resin matrix composites reinforced with alkali treated jute fibres. Compos. Part. A Appl. Sci. Manuf. 33, 233–241 (2002). https://doi.org/10.1016/S1359-835X(01)00096-3CrossRef

24.

Dhakal, S., Keerthi Gowda, B.S.: An Experimental Study on Mechanical properties of Banana Polyester Composite. Mater. Today. Proc. 4, 7592–7598 (2017). https://doi.org/10.1016/j.matpr.2017.07.092CrossRef

25.

Prasad, G.L.E., Gowda, B.S.K., Velmurugan, R.: A Study on Impact Strength Characteristics of Coir Polyester Composites. Procedia. Eng. 173, 771–777 (2017). https://doi.org/10.1016/j.proeng.2016.12.091CrossRef

26.

Lokantara, I.P., Suardana, N.P.G., Surata, I.W., Winaya, I.N.S.: The effect of fiber volume fraction on tensile and impact properties of eleusine indica grass reinforced polypropylene bio composite. IOP. Conf. Ser. Mater. Sci. Eng. 539, 012028 (2019). https://doi.org/10.1088/1757-899X/539/1/012028CrossRef

27.

Prasad, G.L.E., Gowda, B.S.K., Velmurugan, R.: Comparative Study of Impact Strength Characteristics of Treated and Untreated Sisal Polyester Composites. Procedia. Eng. 173, 778–785 (2017). https://doi.org/10.1016/j.proeng.2016.12.096CrossRef

28.

Deka, H., Misra, M., Mohanty, A.: Renewable resource based “all green composites” from kenaf biofiber and poly(furfuryl alcohol) bioresin. Ind. Crops. Prod. 41, 94–101 (2013). https://doi.org/10.1016/j.indcrop.2012.03.037CrossRef

29.

Watt, E., Abdelwahab, M.A., Snowdon, M.R., Mohanty, A., Khalil, H., Misra, M.: Hybrid biocomposites from polypropylene, sustainable biocarbon and graphene nanoplatelets. Sci. Rep. 10, 10714 (2020). https://doi.org/10.1038/s41598-020-66855-4CrossRef

30.

Giorcelli, M., Bartoli, M.: Development of Coffee Biochar Filler for the Production of Electrical Conductive Reinforced Plastic. Polym. 11, 1916 (2019). https://doi.org/10.3390/polym11121916CrossRef

31.

Giorcelli, M., Khan, A., Pugno, N.M., Rosso, C., Tagliaferro, A.: Biochar as a cheap and environmental friendly filler able to improve polymer mechanical properties. Biomass. Bioenerg. 120, 219–223 (2019). https://doi.org/10.1016/j.biombioe.2018.11.036CrossRef

32.

Jacob, M., Varughese, K.T., Thomas, S.: Water Sorption Studies of Hybrid Biofiber-Reinforced Natural Rubber Biocomposites. Biomacromol. 6, 2969–2979 (2005). https://doi.org/10.1021/bm050278pCrossRef

33.

Zahari, W.Z.W., Badri, R.N.R.L., Ardyananta, H., Kurniawan, D., Nor, F.M.: Mechanical Properties and Water Absorption Behavior of Polypropylene / Ijuk Fiber Composite by Using Silane Treatment. Procedia. Manuf. 2, 573–578 (2015). https://doi.org/10.1016/j.promfg.2015.07.099CrossRef

34.

Sabatini, V., Taroni, T., Rampazzo, R., Bompieri, M., Maggioni, D., Meroni, D., Ortenzi, M.A., Ardizzone, S.: PA6 and Halloysite Nanotubes Composites with Improved Hydrothermal Ageing Resistance: Role of Filler Physicochemical Properties. Functionalization and Dispersion Technique. Polymers. 12, 211 (2020). https://doi.org/10.3390/polym12010211CrossRef

35.

Milanese, A.C., de Carvalho Benini, K.C.C., Cioffi, M.O.H., Voorwald, H.J.C.: Thermal Analysis of Sisal/Epoxy Composite Processed by RTM. Appl. Mech. Mater. 719–720, 50–54 (2015). https://doi.org/10.4028/www.scientific.net/AMM.719-720.50CrossRef

36.

Waters, C.L., Janupala, R.R., Mallinson, R.G., Lobban, L.L.: Staged thermal fractionation for segregation of lignin and cellulose pyrolysis products: An experimental study of residence time and temperature effects. J. Anal. Appl. Pyrolysis. 126, 380–389 (2017). https://doi.org/10.1016/j.jaap.2017.05.008CrossRef

37.

Yang, H., Yan, R., Chen, H., Lee, D.H., Zheng, C.: Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86, 1781–1788 (2007). https://doi.org/10.1016/j.fuel.2006.12.013CrossRef

38.

Lv, D., Xu, M., Liu, X., Zhan, Z., Li, Z., Yao, H.: Effect of cellulose, lignin, alkali and alkaline earth metallic species on biomass pyrolysis and gasification. Fuel. Process. Technol. 91, 903–909 (2010). https://doi.org/10.1016/j.fuproc.2009.09.014CrossRef

39.

Erickson, K.: Thermal Decomposition Mechanisms Associated with Functional Groups in Selected Polymers. In: NATAS Conference. Bowling Green, KY (2006)

Titel: Biocarbon Filled Hemp-Epoxy Composite: Its Physical, Mechanical, and Thermal Properties
verfasst von: Raj Kumar Dahal
Bishnu Acharya
Bob Dony
Animesh Dutta
Publikationsdatum: 18.08.2022
Verlag: Springer Netherlands
Erschienen in: Applied Composite Materials / Ausgabe 6/2022
Print ISSN: 0929-189X
Elektronische ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-022-10059-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2022

Microstructure, Mechanical and Ablation Properties of Transpiration Cooling Applied to C/C-SiC Composite for Novel Anti-ablation Material

Simulated Analysis of Lightning-induced Mechanical Damages in Fiber Reinforced Composites Based on a Pyrolysis-affected Damage Constitutive Model

Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests

Energy-absorption Characteristics of Nacre-inspired Carbon/Epoxy Composite Tubes under Impact Loading

An Elastoplastic-Damage Micromechanical Model and its Application to the Mechanical Analysis of SiC Fibre-reinforced Titanium Matrix Composite under Complex Stress States

In-plane compression response of foam filled re-entrant auxetic structure

Premium Partner

Marktübersichten