Biosorption performance, combustion behavior, and leaching characteristics of olive solid waste during the removal of copper and nickel from aqueous solutions

Several researchers have proved that agricultural by-products constitute good adsorbents for removing heavy metals from aqueous solution. However, few investigations have identified efficient strategies for the adsorbent′s regeneration. Hence, a global methodology for the removal of copper and nickel metals from wastewater including metal biosorption, thermal treatment and residual ash landfill is proposed. In order to validate this strategy, olive solid waste (OSW), provided by an olive oil mill from Tunisia, were used to remove copper and nickel on batch experiments. Copper and nickel were adsorbed on a monolayer of OSW surface with maximal adsorption capacity (q _max) of 3.6 and 1.7 mg g⁻¹, respectively. Contaminated OSW with copper and nickel were combusted at 850 °C in an electrical furnace. About 96 % of each metal was recovered in residual ashes that present a good secondary raw material for copper and nickel production. Low leaching transfers (≤4 %) were observed for copper and nickel from residual ashes leading to the possibility to be landfilled. Therefore, the suggested process can be used as an alternative to the classical technologies for effluent decontamination.