nach oben

Erschienen in:

15.09.2020

Ca₂P₂O₇–Ca(PO₃)₂ Ceramic Obtained by Firing β-Tricalcium Phosphate and Monocalcium Phosphate Monohydrate Based Cement Stone

verfasst von: T. V. Safronova, S. A. Korneichuk, T. B. Shatalova, Yu. S. Lukina, S. P. Sivkov, Ya. Yu. Filippov, V. K. Krut’ko, O. N. Musskaya

Erschienen in: Glass and Ceramics | Ausgabe 5-6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Ceramic in the system Ca₂P₂O₇–Ca(PO₃)₂ was obtained by firing cement stone fabricated from a powder mixture which included β-tricalcium phosphate β-Ca₃(PO₄)₂ and monocalcium phosphate monohydrate Ca(H₂PO₄)₂ ∙ H₂O. The molar ratio Ca/P of the initial powder mixtures was set as Ca/P ≤ 1. X-ray phase analysis shows all ceramic samples after firing at 1000°C to include β-calcium pyrophosphate β-Ca₂P₂O₇, and a sample of the ceramic made from a powder mixture with the maximum content of monocalcium phosphate monohydrate Ca(H₂PO₄)2 ∙ H₂O also contained β-calcium polyphosphate β-Ca(PO₃)₂. The obtained calcium phosphate ceramic with reduced firing temperature can be used to develop a resorbable matrix for tissue engineering structures.

Vorheriger Artikel Glass and Ceramics Volume 77, Number 5

Nächster Artikel Effect of Copper (II) Oxide on the Microstructure and Phase Transformations of Bismuth Orthoniobate

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

T. Winkler, F. A. Sass, G. N. Duda, and K. Schmidt-Bleek, “A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering: The unsolved challenge,” Bone & Joint Res., 7(3), 232 – 243 (2018); https://doi.org/10.1302/2046-3758.73.BJR2017-0270.R1.

J. J. Li, M. Ebied, J. Xu, and H. Zreiqat, “Current Approaches to Bone Tissue Engineering: The Interface between Biology and Engineering,” Adv. Healthcare Mater., 7(6), 1701061; https://doi.org/10.1002/adhm.201701061.

J. H. Lee, B. S. Chang, U. O. Jeung, et al., “The first clinical trial of beta-calcium pyrophosphate as a novel bone graft extender in instrumented posterolateral lumbar fusion,” Clinics in Orthopedic Surgery, 3(3), 238 – 244 (2011); https://doi.org/10.4055/cios.2011.3.3.238.CrossRef

T. Toshima, R. Hamai, M. Tafu, et al., “Morphology control of brushite prepared by aqueous solution synthesis,” J. Asian Ceram. Soc., 2(1), 52 – 56 (2014); https://doi.org/10.1016/j.jascer.2014.01.004.CrossRef

S. M. Arifuzzaman and S. Rohani, “Experimental study of brushite precipitation,” J. Crystal Growth, 267(3 – 4), 624 – 634 (2004); https://doi.org/10.1016/j.jcrysgro.2004.04.024.

A. C. Tas, “Monetite (CaHPO₄) synthesis in ethanol at room temperature,” J. Am. Ceram. Soc., 92(12), 2907 – 2912 (2009); https://doi.org/10.1111/j.1551-2916.2009.03351.x.CrossRef

G. Thomas and H. Dehbi, “Effect of water on monetite synthesis in the solid state,” Mater. Chem. Phys., 15(1), 1 – 13 (1986); https://doi.org/10.1016/0254-0584(86)90084-2.CrossRef

T. V. Safronova, V. I. Putlyaev, S. A. Kurbatova, et al., “Properties of the powder of amorphous calcium pyrophosphate synthesized using ion exchange to produce bioceramics,” Inorg. Mater., 51(11), 1269 – 1276 (2015); https://doi.org/10.7868/S0002337X15110093.CrossRef

T. V. Safronova, S. A. Kurbatova, T. B. Shatalova, et al., “Calcium pyrophosphate powder synthesized from pyrophosphoric acid and calcium acetate to obtain bioceramics,” Materialovedenie, No. 7, 41 – 48 (2016).

10.

E. V. Kukueva, V. I. Putlyaev, T. V. Safronova, and A. A. Tikhonov, “Composite bioceramic based on octacalcium phosphate decomposition products,” Steklo Keram., No. 2, 37 – 42 (2017); E. V. Kukueva, V. I. Putlyaev, T. V. Safronova, and A. A. Tikhonov, “Composite bioceramic based on octacalcium phosphate decomposition products,” Glass Ceram., 7(1 – 2), 67 – 72 (2017); https://doi.org/10.1007/s10717-017-9931-2].

11.

T. V. Safronova, V. I. Putlyaev, V. K. Ivanov, et al., “Powder mixtures based on ammonium hydrogen phosphate and calcium carbonate to obtain biocompatible porous ceramics in the system CaO–P₂O₅,” Novye Ogneupory, No. 9, 45 – 53 (2015).

12.

T. V. Safronova, T. B. Shatalova, Y. Yu. Filippov, et al., “Ceramics obtained in the Ca₂P₂O₇ – Ca(PO₃)₂ system by firing samples from hardening mixtures based on calcium citrate and monocalcium phosphate monohydrate,” Materialovedenie, No. 9, 31 – 40 (2019); https://doi.org/10.31044/1684-579X-2019-0-9-31-40.

13.

U. Gbureck, T. Hölzel, I. Biermann, et al., “Preparation of tricalcium phosphate/calcium pyrophosphate structures via rapid prototyping,” J. Mater. Sci.: Mater. in Medicine, 19(4), 1559 – 1563 (2008); https://doi.org/10.1007/s10856-008-3373-x.CrossRef

14.

A. Bolarinwa, U. Gbureck, P. Purnell, et al., “Cement casting of calcium pyrophosphate based bioceramics,” Adv. Appl. Ceram., 109(5), 291 – 295 (2010). https://doi.org/10.1179/174367609X459586.CrossRef

15.

T. V. Safronova, Yu. S. Lukina, S. P. Sivkov, et al., “Calcium pyrophosphate based ceramics obtained by firing cement stone,” Tekh. Tekhnol. Silikatov, 27(1), 17 – 20 (2020).

16.

M. N. Safina, T. V. Safronova, and E. S. Lukin, “Calcium phosphate based ceramic with a resorbable phase and low sintering temperature,” Steklo Keram., No. 7, 19 – 24 (2007); M. N. Safina, T. V. Safronova, and E. S. Lukin, “Calcium phosphate based ceramic with a resorbable phase and low sintering temperature,” Glass Ceram., 64(7 – 8), 238 – 243 (2007); https://doi.org/10.1007/s10717-009-9086-x].

17.

K. Wang, F. Chen, C. Liu, and C. Rüssel, “The effect of polymeric chain-like structure on the degradation and cellular biocompatibility of calcium polyphosphate,” Mater. Sci. Eng. C, 28(8), 1572 – 1578 (2008); https://doi.org/10.1016/j.msec.2008.04.017.CrossRef

18.

L. E. Jackson and A. J. Wright, “A new synthetic route to calcium polyphosphates,” Key Eng. Mater., 284, 71 – 74 (2005); https://doi.org/10.4028/www.scientific.net/KEM.284-286.71.CrossRef

19.

J. Trommer, M. Schneider, H. Worzala, and A. N. Fitch, “Structure determination of CaH₂P₂O₇ from in situ powder diffraction data,” Mater. Sci. Forum, 321, 374 – 379 (2000); https://doi.org/10.4028/www.scientific.net/MSF.321-324.374.CrossRef

20.

E. H. Brown, W. E. Brown, J. R. Lehr, et al., “Calcium ammonium pyrophosphates,” J. Phys. Chem., 62(3), 366 – 367 (1958); https://doi.org/10.1021/j150561a036CrossRef

21.

Y. V. Subbarao and R. Ellis, “Reaction products of olyphosphates and orthophosphates with soils and influence on uptake of phosphorus by plants,” Soil Sci. Soc. Am. J., 39(6), 1085 – 1088 (1975); https://doi.org/10.2136/sssaj1975.03615995003900060022x.CrossRef

22.

E. H. Brown, J. R. Lehr, J. P. Smith, and A. W. Frazier, “Fertilizer materials, preparation and characterization of some calcium pyrophosphates,” J. Agricult. Food Chem., 11(3), 214 – 222 (1963); https://doi.org/10.1021/jf60127a020.CrossRef

23.

D. Zobel and N. Ba, “Untersuchungen zur Phosphitpyrolyse; Reaktionen beim Erhitzen von CaH₂(HPO₃)₂ ∙ H₂O in Abwesenheit von Sauerstoff,” Z. Chem., 9(11), 433 (1969); https://doi.org/10.1002/zfch.19690091118.

24.

T. V. Safronova, E. A. Mukhin, V. I. Putlyaev, et al., “Amorphous calcium phosphate powder synthesized from calcium acetate and polyphosphoric acid for bioceramics application,” Ceram. Int., 43, 1310 – 1317 (2017); https://doi.org/10.1016/j.ceramint.2016.10.085.CrossRef

25.

T. V. Safronova, A. S. Kiselev, T. B. Shatalova, et al., “Synthesis of calcium/ammonium double pyrophosphate monohydrate Ca(NH₄)₂P₂O₇ ∙ H₂O – the precursor of biocompatible phases of calcium phosphate ceramics,” Izv. Akad. Nauk, Ser. Khimicheskaya, No. 1, 139 – 147 (2020).

26.

G. MacLennan and C. A. Beevers, “The crystal structure of monocalcium phosphate monohydrate, Ca(H₂PO₄)₂ ∙ H₂O,” Acta Crystallogr., 9(2), 187 – 190 (1956); https://doi.org/10.1107/S0365110X56000413.CrossRef

27.

B. Boonchom and C. Danvirutai, “The morphology and thermal behavior of calcium dihydrogen phosphate monohydrate (Ca(H₂PO₄)₂ ∙ H₂O) obtained by a rapid precipitation route at ambient temperature in different media,” J. Optoelectron. Biomed. Mater., 1, 115 – 123 (2009); URL: http://chalcogen.ro/1Boonchom1.pdf.

28.

B. Boonchom, “Parallelogram-like microparticles of calcium dihydrogen phosphate monohydrate (Ca(H₂PO₄)₂ ∙ H₂O) obtained by a rapid precipitation route in aqueous and acetone media,” J. Alloys Compounds, 482(1 – 2), 199 – 202 (2009); https://doi.org/10.1016/j.jallcom.2009.03.157.

29.

T. V. Safronova, V. I. Putlyaev, A. V. Knot’ko, et al., “Calcium phosphate ceramic in the system Ca(PO₃)₂–Ca₂P₂O₇ based on powder mixtures containing calcium hydrophosphate,” Steklo Keram., No. 7, 37 – 44 (2018); T. V. Safronova, V. I. Putlyaev, A. V. Knot’ko, et al., “Calcium phosphate ceramic in the system Ca(PO₃)₂–Ca₂P₂O₇ based on powder mixtures containing calcium hydrophosphate,” Glass Ceram., 75(7 – 8), 279 – 286 (2018); https://doi.org/10.1007/s10717-018-0072-z.

30.

Y. Y. Filippov, E. D. Orlov, E. S. Klimashina, et al., “Colloidal forming of macroporous calcium pyrophosphate bioceramics in 3D-printed molds,” Bioactive Mater., 5(2), 309 – 317 (2020).CrossRef

31.

A. Lode, K. Meissner, Y. Luo, et al., “Fabrication of porous scaffolds by three-dimensional plotting of a pasty calcium phosphate bone cement under mild conditions,” J. of Tissue Engineering and Regenerative Medicine, 8(9), 682 – 693 (2014); https://doi.org/10.1002/term.1563.32.

32.

Soorya Kabekkodu (ed.), ICDD (2010). PDF-4+ 2010 (Database), International Centre for Diffraction Data. Newtown Square, PA, USA (2010); URL: http://www.icdd.com/products/pdf2.htm.

33.

W. L. Hill, G. T. Faust, and D. S. Reynolds, “System CaO–P₂O₅,” Am. J. Sci., 242(9), 457 – 477 (1944); https://doi.org/10.2475/ajs.242.9.457.CrossRef

Titel: Ca2P2O7–Ca(PO3)2 Ceramic Obtained by Firing β-Tricalcium Phosphate and Monocalcium Phosphate Monohydrate Based Cement Stone
verfasst von: T. V. Safronova
S. A. Korneichuk
T. B. Shatalova
Yu. S. Lukina
S. P. Sivkov
Ya. Yu. Filippov
V. K. Krut’ko
O. N. Musskaya
Publikationsdatum: 15.09.2020
Verlag: Springer US
Erschienen in: Glass and Ceramics / Ausgabe 5-6/2020
Print ISSN: 0361-7610
Elektronische ISSN: 1573-8515
DOI: https://doi.org/10.1007/s10717-020-00263-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2020

Effect of Fluxes on the Synthesis of Porous Materials Based on Native Silicate Raw Material

Synthesis of Porous Ceramic Materials for Catalytically Active Membranes by Technological Combustion and Sintering

Pre-Ceramic Nanostructured Liznmn-Ferrite Powders: Synthesis, Structure, and Electromagnetic Properties

Effect of Added Plasticizers on the Strength Metrics of Molding Plaster

Comprehensive Analysis of the Physicochemical Properties of Metallurgical Dust for Determining the Main Directions of its Reprocessing

Turning of Thermoplastics Using Ceramic Cutting Tools

Premium Partner

Marktübersichten