nach oben

Steel in Translation

Erschienen in:

01.11.2023

Changes in Grain Shape and Dislocation Density of Carbon Steel during Pendulum SPD

verfasst von: S. A. Zaides, Ho Min Quan

Erschienen in: Steel in Translation | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The results of experimental studies to determine the influence of the parameters of pendulum surface plastic deformation (SPD) on the distortion of grains of carbon steel 45 are presented. It has been established that after pendulum SPD, the grains in the hardening zone change in size and shape, which affects the increase in microhardness. The dislocation density of steel 45 after SPD was also determined, which can be used to judge the increase in the strength characteristics of hardened parts.

Vorheriger Artikel Concerning the Profiling of Electrowelded Steel Pipes with a Triangular Cross Section

Nächster Artikel Features of Vanadium Doping of Fe–30Cr–20Co Powder Hard Magnetic Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Laouar, L., Hamadache, H., Saad, S., Bouchelaghem, A., and Mekhilef, S., Mechanical surface treatment of steel-Optimization parameters of regime, Phys. Procedia, 2009, vol. 2, no. 3, pp. 1213–1221. https://doi.org/10.1016/j.phpro.2009.11.084ADSCrossRef

Gorbunov, A.V. and Gorbunov, V.F., Substantiation of the strengthening depth of flexible shafts at surface plastic deformation by centripetal roller, Vestn. Irkuts. Gos. Tekh. Univ., 2012, no. 9, pp. 29–33.

Zhang, Z., Theoretical prediction of cross-sectional deformation of circular thin-walled tube in large elastic–plastic deformation stage under lateral compression, Thin-Walled Struct., 2022, vol. 180, p. 109957. https://doi.org/10.1016/j.tws.2022.109957CrossRef

Biswas, S., Alavi, S.H., Sedai, B., Blum, F.D., and Harimkar, S.P., Effect of ultrasonic vibration-assisted laser surface melting and texturing of Ti–6Al–4V ELI alloy on surface properties, J. Mater. Sci. Technol., 2019, vol. 35, no. 2, pp. 295–302. https://doi.org/10.1016/j.jmst.2018.09.057CrossRef

Li, Y.B., Zhang, Q.X., Qi, L., and David, S.A., Improving austenitic stainless steel resistance spot weld quality using external magnetic field, Sci. Technol. Weld. Joining, 2018, vol. 23, no. 7, pp. 619–627. https://doi.org/10.1080/13621718.2018.1443997CrossRef

Di Giovanni, C., Biro, E., and Zhou, N.Y., Impact of liquid metal embrittlement cracks on resistance spot weld static strength, Sci. Technol. Weld. Joining, 2019, vol. 24, no. 3, pp. 218–224. https://doi.org/10.1080/13621718.2018.1518363CrossRef

Grzesik, W., Rech, J., and Żak, K., High-precision finishing hard steel surfaces using cutting, abrasive and burnishing operations, Procedia Manuf., 2015, vol. 1, no. 9, pp. 619–627. https://doi.org/10.1016/j.promfg.2015.09.048CrossRef

Chen, X.-S., Li, Q., and Fei, Sh.-M., Constrained model predictive control in ball mill grinding process, Powder Technol., 2008, vol. 186, no. 1, pp. 31–39. https://doi.org/10.1016/j.powtec.2007.10.026CrossRef

Le Roux, J.D. and Craig, I.K., Requirements for estimating the volume of rocks and balls in a grinding mill, IFAC-PapersOnLine, 2017, vol. 50, no. 1, pp. 1169–1174. https://doi.org/10.1016/j.ifacol.2017.08.403CrossRef

10.

Mitrofanova, K.S., Study of the quality of surface layer of steel 45 after surface plastic deformation with a multiradius roller, Sbornik trudov konferentsii Innovatsii v mashinostroenii (Proc. Conf. Innovations in Machinery Manufacture), 2019, pp. 639–787.

11.

Zaides, S.A., Spravochnik po protsessam poverkhnostnogo plasticheskogo deformirovaniya (Reference Book on Processes of Surface Plastic Deformation), Irkutsk: Irkutsk. Nats. Issled. Tekh. Univ., 2021.

12.

Kyong, N.K., Improving the quality of low-stiff shafts by surface plastic deformation under constrained conditions, Cand. Sci. (Eng.) Dissertation, Irkutsk: Irkutsk National Research Tech. Univ., 2018.

13.

Yaman, N., Sunay, N., Kaya, M., and Kaynak, Yu., Enhancing surface integrity of additively manufactured inconel 718 by roller burnishing process, Procedia CIRP, 2022, vol. 108, pp. 681–686. https://doi.org/10.1016/j.procir.2022.03.106CrossRef

14.

Frihat, M.H., Al Quran, F.M.F., and Al-Odat, M.Q., Experimental investigation of the influence of burnishing parameters on surface roughness and hardness of brass alloy, J Mater. Sci. Eng., 2015, vol. 5, no. 216, pp. 2169–0022. https://doi.org/10.4172/2169-0022.1000216CrossRef

15.

Ezhelev, A.V., Bobrovskii, I.N., and Luk’yanov, A.A., Analysis of the surface plastic deformation treatment methods, Fundam. Issled., 2012, no. 6-3, pp. 642–646.

16.

Kotenok, V.I. and Podobedov, S.I., Energy-efficient design of rolls for ball-rolling mills, Metallurgist, Metallurgist, 2001, vol. 45, no. 9/10, pp. 363–367. https://doi.org/10.1023/a:1017920006038CrossRef

17.

Tomczak, J., Pater, Z., and Bulzak, T., The flat wedge rolling mill for forming balls from heads of scrap railway rails, Arch. Metall. Mater., 2018, vol. 63, no. 1, pp. 5–12. https://doi.org/10.24425/118901CrossRef

18.

Chumachenko, E.N., Aksenov, S.A., and Logashina, I.V., Mathematical modeling and energy conservation for rolling in passes, Metallurgist, 2010, vol. 54, nos. 7–8, pp. 498–504. https://doi.org/10.1007/s11015-010-9330-1CrossRef

19.

Zaides, S.A. and Quan, H.M., Method of surface plastic deformation of the outer surface of an element in form of body of revolution, RF Patent 2757643, Byull. Izobret., 2021, no. 29.

20.

Zaides, S.A. and Quan, H.M., Pendulum surface plastic deformation of cylindrical blanks, Steel Transl., 2022, vol. 52, no. 5, pp. 487–494. https://doi.org/10.3103/S0967091222050114CrossRef

21.

Prikhod’ko, V.M., Petrova, L.G., and Chudina, O.V., Metallofizicheskie osnovy razrabotki uprochnyayushchikh tekhnologii (Metal Physics Foundations in Developing Strengthening Technologies), Moscow: Mashinostroenie, 2003.

22.

Drapkin, B.M., Kononenko, V.K., and Bez’’yazychnyi, V.F., Svoistva splavov v ekstremal’nom sostoyanii (Properties of Alloys in Extreme Condition), Moscow: Mashinostroenie, 2004.

23.

Sulima, A.M., Shulov, V.A., and Yagodkin, Yu.D., Poverkhnostnyi sloi i ekspluatatsionnye svoistva detalei mashin (Surface Layer and Operation Properties of Machine Elements), Moscow: Mashinostroenie, 1988, pp. 146–149.

Titel: Changes in Grain Shape and Dislocation Density of Carbon Steel during Pendulum SPD
verfasst von: S. A. Zaides
Ho Min Quan
Publikationsdatum: 01.11.2023
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 11/2023
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091223110372

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Features of the Distribution of Nonmetallic Inclusions in Continuously Cast Billets Made of Sulfur-Containing Steel C45E

Construction of Models for Predicting the Microstructure of Steels after Heat Treatment Using Machine Learning Methods

Determination of Optimal Parameters of Hot Die Forging of Piercing Mill Mandrel by Modeling in QForm Suite

Behavior of Triuranium Disilicide in Water Vapor

Influence of the Iron Ore Pellets Macrostructure on Their Strength

Analysis of Thermal Processes in Steels during Laser Heating

Premium Partner

Marktübersichten