nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

8. Characterization Techniques

verfasst von : Jose Martin Herrera Ramirez, Raul Perez Bustamante, Cesar Augusto Isaza Merino, Ana Maria Arizmendi Morquecho

Erschienen in: Unconventional Techniques for the Production of Light Alloys and Composites

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter focuses on the main characterization techniques used for the morphological, microstructural, and structural analysis, as well as for the mechanical behavior analysis of light alloys and composites. There are different characterization techniques available, ranging from the most common and accessible ones to the most sophisticated and, sometimes, not available to everyone. A brief description of all these techniques is provided, presenting some examples of each one to show their capabilities. Additionally, the chapter is intended to inform the reader about the nuances and limitations during the characterization of metal matrix composites. The understanding of the microstructural features, such as the distribution of the reinforcement within the matrix and the interfacial reaction between them, as well as of the mechanical, thermal, and corrosion behavior is necessary during the production of metal matrix composites.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Thermal Spray Coatings

Nächstes Kapitel Interface Characterization

Armstrong, R., Adams, B. L., & Arnold, M. A. (2018). ASM handbook volume 10, materials characterization. Materials Park: ASM International.

Cayless, R.B.C. (1990). ASM handbook volume 2, properties and selection: Nonferrous alloys and special purpose materials. Materials Park, OH: ASM International

Hernandez Robles, F. C., Ramirez, J. M. H., & Mackay, R. (2017). Al-Si alloys: Automotive, aeronautical, and aerospace applications. Cham: Springer.

Spierings, A. B., Schneider, M., & Eggenberger, R. (2011). Comparison of density measurement techniques for additive manufactured metallic parts. Rapid Prototyping Journal, 17(5), 380–386.

Complementing X-ray imaging with Neutron Radiography. 2020.; Available from: https://andor.oxinst.com/learning/view/article/complementing-x-ray-imaging-with-neutron-radiography.

Sartorius YDK 01, YDK 01-0D, YDK 01 LP Density Determination Kit User’s Manual. 1998. Sartorius AG: Goettingen, Germany.

Latief, F., & Sherif, E.-S. M. (2012). Effects of sintering temperature and graphite addition on the mechanical properties of aluminum. Journal of Industrial and Engineering Chemistry, 18(6), 2129–2134.

Woods, S. (2015). 3-D CT inspection offers a full view of microparts. Available from: http://micromanufacturing.com/showthread.php?t=876.

Du Plessis, A., et al. (2018). Standard method for microCT-based additive manufacturing quality control 2: Density measurement. MethodsX, 5, 1117–1123.

10.

Guinebretière, R. (2013). X-ray diffraction by polycrystalline materials. Somerset: Wiley.

11.

Cao, A., et al. (2001). X-ray diffraction characterization on the alignment degree of carbon nanotubes. Chemical Physics Letters, 344(1–2), 13–17.

12.

Rietveld, H. M. (2014). The Rietveld method. Physica Scripta, 89(9), 098002.

13.

Dresselhaus, M. S., et al. (2010). Perspectives on carbon nanotubes and graphene raman spectroscopy. Nano Letters, 10(3), 751–758.

14.

Dresselhaus, M. S., et al. (2005). Raman spectroscopy of carbon nanotubes. Physics Reports, 409(2), 47–99.

15.

Heise, H. M., et al. (2011). Characterization of carbon nanotube filters and other carbonaceous materials by Raman spectroscopy—II: Study on dispersion and disorder parameters. Journal of Raman Spectroscopy, 42(3), 294–302.

16.

Jorio, A., et al. (2001). Structural (n, m) determination of isolated single-wall carbon nanotubes by resonant Raman scattering. Physical Review Letters, 86(6), 1118–1121.

17.

Lourie, O., & Wagner, H. (1998). Evaluation of Young’s modulus of carbon nanotubes by micro-Raman spectroscopy. Journal of Materials Research, 13(9), 2418–2422.

18.

Goldstein, J. I., et al. (2017). Scanning electron microscopy and X-ray microanalysis. New York: Springer.

19.

Girão, A. V., Caputo, G., & Ferro, M. C. (2017). Application of scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM-EDS). Comprehensive Analytical Chemistry, 75, 153–168.

20.

Abd Mutalib, M., et al. (2017). Chapter 9 – Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) spectroscopy. In Membrane characterization (pp. 161–179). Amsterdam: Elsevier.

21.

Lotnyk, A., et al. (2015). Focused high- and low-energy ion milling for TEM specimen preparation. Microelectronics Reliability, 55(9–10), 2119–2125.

22.

Ünlü, N. (2008). Preparation of high quality Al TEM specimens via a double-jet electropolishing technique. Materials Characterization, 59(5), 547–553.

23.

Darnbrough, J., Liu, D., & Flewitt, P. (2013). Micro-scale testing of ductile and brittle cantilever beam specimens in situ with a dual beam workstation. Measurement Science and Technology, 24(5), 055010.

24.

Mayer, J., et al. (2007). TEM sample preparation and FIB-induced damage. MRS Bulletin, 32(5), 400–407.

25.

Williams, D. B., & Carter, C. B. (2009). Transmission electron microscopy: A textbook for materials science. Boston: Springer US.

26.

Liu, M., & Cowley, J. M. (1994). Structures of carbon nanotubes studied by HRTEM and nanodiffraction. Ultramicroscopy, 53(4), 333–342.

27.

Hofer, F., et al. (2016). Fundamentals of electron energy-loss spectroscopy. In IOP conference series: Materials science and engineering. Bristol: IOP Publishing.

28.

Demoncy, N., et al. (1998). Filling carbon nanotubes with metals by the arc-discharge method: The key role of sulfur. The European Physical Journal B-Condensed Matter and Complex Systems, 4(2), 147–157.

29.

Van der Heide, P. (2011). X-ray photoelectron spectroscopy: An introduction to principles and practices. Hoboken: Wiley.

30.

Haque, M. A., & Saif, T. (2008). Mechanical testing at the micro/nanoscale. In W. N. Sharpe (Ed.), Springer handbook of experimental solid mechanics. Boston: Springer US.

31.

Cree, D., & Pugh, M. (2011). Dry wear and friction properties of an A356/SiC foam interpenetrating phase composite. Wear, 272(1), 88–96.

32.

Suresh, K., et al. (2013). Sliding wear behavior of gas tunnel type plasma sprayed Ni-based metallic glass composite coatings. Vacuum, 88, 114–117.

33.

Abbas, A., et al. (2020). Tribological effects of carbon nanotubes on magnesium alloy AZ31 and analyzing aging effects on CNTs/AZ31 composites fabricated by stir casting process. Tribology International, 142, 105982.

34.

Huang, S. J., Abbas, A., & Ballóková, B. (2019). Effect of CNT on microstructure, dry sliding wear and compressive mechanical properties of AZ61 magnesium alloy. Journal of Materials Research and Technology, 8(5), 4273–4286.

35.

Lim, S., et al. (1999). The tribological properties of Al–Cu/SiCp metal–matrix composites fabricated using the rheocasting technique. Journal of Materials Processing Technology, 89, 591–596.

36.

Rodrigo, P., et al. (2009). Microstructure and wear resistance of Al–SiC composites coatings on ZE41 magnesium alloy. Applied Surface Science, 255(22), 9174–9181.

37.

Lim, C., Lim, S., & Gupta, M. (2003). Wear behaviour of SiCp-reinforced magnesium matrix composites. Wear, 255(1–6), 629–637.

38.

Narayanasamy, P., & Selvakumar, N. (2017). Tensile, compressive and wear behaviour of self-lubricating sintered magnesium based composites. Transactions of Nonferrous Metals Society of China, 27(2), 312–323.

39.

Dash, D., et al. (2020). Influence of TiC on microstructure, mechanical and wear properties of magnesium alloy (AZ91D) matrix composites. Journal of Scientific & Industrial Research, 29, 164–169.

40.

Thirugnanasambandham, T., et al. (2019). Experimental study of wear characteristics of Al2O3 reinforced magnesium based metal matrix composites. Materials Today: Proceedings, 14, 211–218.

41.

ASTM. (2017). G99-17 standard test method for wear testing with a pin-on-disk apparatus. West Conshohocken: ASTM International.

42.

Oliver, W. C., & Pharr, G. M. (1992). An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research, 7(6), 1564–1586.

43.

Laha, T., & Agarwal, A. (2008). Effect of sintering on thermally sprayed carbon nanotube reinforced aluminum nanocomposite. Materials Science and Engineering A, 480(1–2), 323–332.

44.

Duarte, M., et al. (2020). Nanomechanical characterization of a metal matrix composite reinforced with carbon nanotubes. AIMS Materials Science, 7(1), 33–45.

45.

Chen, J., & Bull, S. (2006). On the relationship between plastic zone radius and maximum depth during nanoindentation. Surface and Coatings Technology, 201(7), 4289–4293.

46.

Chen, J. (2012). Indentation-based methods to assess fracture toughness for thin coatings. Journal of Physics D: Applied Physics, 45(20), 203001.

47.

ASTM E384-17 standard test method for microindentation hardness of materials. West Conshohocken: ASTM International, 2017.

48.

ASTM E399-19 standard test method for linear-elastic plane-strain fracture toughness KIc of metallic materials. West Conshohocken: ASTM International, 2019.

Titel: Characterization Techniques
verfasst von: Jose Martin Herrera Ramirez
Raul Perez Bustamante
Cesar Augusto Isaza Merino
Ana Maria Arizmendi Morquecho
Verlag: Springer International Publishing
Buch: Unconventional Techniques for the Production of Light Alloys and Composites
Print ISBN: 978-3-030-48121-6

Electronic ISBN: 978-3-030-48122-3

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-48122-3_8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht