nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

12.12.2019

CO₂ Laser Cutting Performance on Ultra High Strength Steel (UHSS)

verfasst von: A. F. M. Tahir, A. R. Rashid, N. E. Sariff, E. A. Rahim

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Evolution of a new breed steel, Ultra High Strength Steel (UHSS), has been adapted by the automotive industry after being used for heavy trucks. Higher tensile strength and improved mechanical properties of UHSS are the main reason for its selection particularly in Body In White (BIW) construction at critical chassis area. Laser cutting process is noted as the final trimming method for this harden material as die pressing resulted as an ineffective process. UHSS cutting performance using CO₂ laser with variation on laser power, cutting speed, assist gas type and assist gas pressure was determined to identify the effect of these parameters on the cutting quality. Cutting quality assessment was carried out according to EN ISO 9013 standard where kerf width, perpendicularity and microhardness were evaluated based on parameters set at 1.7 mm thickness of 22MnB5 UHSS boron steel. The quality of these cuttings was evaluated as the results show that thermal exposure dependent on energy density and gas type reflect the outcome where higher thermal exposure introduced bigger kerf with better perpendicularity. It was also found that isothermal effects such as Heat Affected Zone (HAZ) and martensitic transformation were also clearly visible since nitrogen produced a better cutting quality and material integrity consumption at the cutting edge.

Vorheriger Artikel Tailoring the Pressure Profile of TEA-CO2 Laser-Induced Shock Waves for Mechanical Forming and Separation Processes

Nächster Artikel Investigations on TaC Localized Dispersed X38CrMoV5-3 Surfaces with Regard to the Manufacturing of Wear Resistant Protruded Surface Textures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Karbasian, H., Tekkaya, A.E.: A review on hot stamping. J. Mater. Process. Tech. 210, 2103–2118 (2010). https://doi.org/10.1016/j.jmatprotec.2010.07.019 CrossRef

Merklein, M., Lechler, J., Geiger, M.: Characterisation of the flow properties of the Quenchenable ultra high strength steel 22MnB5. CIRP Ann. Manuf. Technol. 55, 229–232 (2006). https://doi.org/10.1016/S0007-8506(07)60404-1 CrossRef

Ghiotti, A., Sgarabotto, F., Bruschi, S.: A novel approach to wear testing in hot stamping of high strength boron steel sheets. Wear. 302, 1319–1326 (2013). https://doi.org/10.1016/j.wear.2012.12.051 CrossRef

Lara, A., Picas, I., Casellas, D.: Journal of materials processing technology effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels. J. Mater. Process. Tech. 213, 1908–1919 (2013). https://doi.org/10.1016/j.jmatprotec.2013.05.003 CrossRef

Tahir, A.F.M., Aqida, S.N.: An investigation of laser cutting quality of 22MnB5 ultra high strength steel using response surface methodology. Opt. Laser Technol. 92, 142–149 (2017). https://doi.org/10.1016/j.optlastec.2017.01.005 CrossRef

Russo Spena, P.: CO₂ laser cutting of hot stamping boron steel sheets. Metals (Basel). 7(456), (2017). https://doi.org/10.3390/met7110456 CrossRef

Tahir, A.F.M., Rahim, E.: A study on the laser cutting quality of ultra-high strength steel. J. Mech. Eng. Sci. 10, 2146–2159 (2016). https://doi.org/10.15282/jmes.10.2.2016.18.0202 CrossRef

Tahir, A.F.M., Yusup, M.Z.: Application of Taguchi method in determining laser cutting quality of ultra high strength steel. Int. J. Mach. Mach. Mater. 20, 556 (2018). https://doi.org/10.1504/IJMMM.2018.096381 CrossRef

Choudhury, I.A., Shirley, S.: Laser cutting of polymeric materials: an experimental investigation. Opt. Laser Technol. 42, 503–508 (2010). https://doi.org/10.1016/j.optlastec.2009.09.006 CrossRef

10.

Badoniya, P.: CO₂ laser cutting of different materials – a review. Int. Res. J. Eng. Technol. 5, 1–12 (2018)

11.

Chen, X., Li, T., Hu, Z., Zhou, M.: Using orthogonal experimental method optimizing surface quality of CO₂ laser cutting process for PMMA microchannels. Int. J. Adv. Manuf. Technol. 1–7 (2016). https://doi.org/10.1007/s00170-016-8887-7 CrossRef

12.

Dubey, A.K., Yadava, V.: Laser beam machining—a review. Int. J. Mach. Tools Manuf. 48, 609–628 (2008). https://doi.org/10.1016/j.ijmachtools.2007.10.017 CrossRef

13.

Tahir, A.F.M., Rashid, A.R.: Experimental evaluation of CO₂ laser cutting quality of UHSS using oxygen as an assisted gas. J. Teknol. Sci. Eng. 78, 69 (73, 2016). https://doi.org/10.11113/jt.v78.5498

14.

Hascalik, A., Ay, M.: CO 2 laser cut quality of Inconel 718 nickel—based superalloy. Opt. Laser Technol. 48, 554–564 (2013). https://doi.org/10.1016/j.optlastec.2012.11.003 CrossRef

15.

Cekic, A., Begic-Hajdarevic, D., Kulenovic, M., Omerspahic, A.: CO₂ laser cutting of alloy steels using N2 assist gas. Procedia Eng. 69, 310–315 (2014). https://doi.org/10.1016/j.proeng.2014.02.237 CrossRef

16.

Stournaras, A., Stavropoulos, P., Salonitis, K., Chryssolouris, G.: An investigation of quality in CO₂ laser cutting of aluminum. CIRP J. Manuf. Sci. Technol. 2, 61–69 (2009). https://doi.org/10.1016/j.cirpj.2009.08.005 CrossRef

17.

Riveiro, A., Quintero, F., Pou, J.: Laser fusion cutting of difficult materials. In: Advances in laser materials processing, pp. 43–68. Elsevier (2010)

18.

Lamikiz, A., Lacalle, D., Sa, J.A., Lo, L.N.: CO₂ laser cutting of advanced high strength steels ( AHSS ). J. Appl. Surf. Sci. 242, 362–368 (2005). https://doi.org/10.1016/j.apsusc.2004.08.039 CrossRef

19.

Yilbas, B.S.: Laser cutting of thick sheet metals : effects of cutting parameters on kerf size variations. J. Mater. Process. Tech. 201, 285–290 (2008). https://doi.org/10.1016/j.jmatprotec.2007.11.265 CrossRef

20.

Madić, M., Radovanović, M., Nedić, B.: Multi-criteria analysis of laser cut surface characteristics in CO₂ laser cutting of stainless steel. Tribol. Ind. 34, 232–238 (2012)

21.

Sivaraos, P.S., Milkey, K.R., Samsudin, A.R., Dubey, A.K., Kidd, P.: Comparison between Taguchi method and response surface. Jordan J. Mech. Ind. Eng. 8, 35–42 (2014)

22.

Mullick, S., Agrawal, A.K., Nath, A.K.: Effect of laser incidence angle on cut quality of 4mm thick stainless steel sheet using fiber laser. Opt. Laser Technol. 81, 168–179 (2016). https://doi.org/10.1016/j.optlastec.2016.02.006 CrossRef

23.

Scintilla, L.D., Tricarico, L.: Experimental investigation on fiber and CO₂ inert gas fusion cutting of AZ31 magnesium alloy sheets. Opt. Laser Technol. 46, 42–52 (2013). https://doi.org/10.1016/j.optlastec.2012.04.026 CrossRef

24.

Chen, S.: The effects of high-pressure assistant-gas flow on high-power CO₂ laser cutting. J Mater Process Technol. 88, 57–66 (1999)CrossRef

25.

Ghany, K.A., Newishy, M.: Cutting of 1.2 mm thick austenitic stainless steel sheet using pulsed and CW Nd:YAG laser. J. Mater. Process. Technol. 168, 438–447 (2005). https://doi.org/10.1016/j.jmatprotec.2005.02.251 CrossRef

26.

Aziz, N., Aqida, S.N.: Optimization of quenching process in hot press forming of 22MnB5 steel for high strength properties for publication in. IOP Conf. Ser. Mater. Sci. Eng. 50, 012064 (2013). https://doi.org/10.1088/1757-899X/50/1/012064 CrossRef

27.

Fernández, B., González, B., Artola, G., López de Lacalle, N., Angulo, C.: A quick cycle time sensitivity analysis of boron steel hot stamping. Metals (Basel). 9, 235 (2019). https://doi.org/10.3390/met9020235 CrossRef

28.

Thomas, D.J.: The influence of the laser and plasma traverse cutting speed process parameter on the cut-edge characteristics and durability of yellow goods vehicle applications. J. Manuf. Process. 13, 120–132 (2011). https://doi.org/10.1016/j.jmapro.2011.02.002 CrossRef

29.

Yilbas, B.S.: Laser cutting quality assessment and thermal efficiency analysis. J. Mater. Process. Technol. 155–156, 2106–2115 (2004). https://doi.org/10.1016/j.jmatprotec.2004.04.194 CrossRef

30.

Eltawahni, H.A., Hagino, M., Benyounis, K.Y., Inoue, T., Olabi, A.G.: Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. Opt. Laser Technol. 44, 1068–1082 (2012). https://doi.org/10.1016/j.optlastec.2011.10.008 CrossRef

31.

Rajaram, N., Sheikh-Ahmad, J., Cheraghi, S.: CO₂ laser cut quality of 4130 steel. Int. J. Mach. Tools Manuf. 43, 351–358 (2003). https://doi.org/10.1016/S0890-6955(02)00270-5 CrossRef

32.

Bok, H.-H., Choi, J., Barlat, F., Suh, D.W., Lee, M.-G.: Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect. Int. J. Plast. 58, 154–183 (2013). https://doi.org/10.1016/j.ijplas.2013.12.002 CrossRef

33.

Babu, P.D., Buvanashekaran, G., Balasubramanian, K.R.: Experimental studies on the microstructure and hardness of laser transformation hardening of low alloy steel. Trans. Can. Soc. Mech. Eng. 36, 241–258 (2012)CrossRef

34.

Thomas, D.J., Whittaker, M.T., Bright, G.W., Gao, Y.: The influence of mechanical and CO₂ laser cut-edge characteristics on the fatigue life performance of high strength automotive steels. J. Mater. Process. Technol. 211, 263–274 (2011). https://doi.org/10.1016/j.jmatprotec.2010.09.018 CrossRef

35.

Tang, B.T., Bruschi, S., Ghiotti, A., Bariani, P.F.: Numerical modelling of the tailored tempering process applied to 22MnB5 sheets. Finite Elem. Anal. Des. 81–81 (69, 2014). https://doi.org/10.1016/j.finel.2013.11.009 CrossRef

Titel: CO2 Laser Cutting Performance on Ultra High Strength Steel (UHSS)
verfasst von: A. F. M. Tahir
A. R. Rashid
N. E. Sariff
E. A. Rahim
Publikationsdatum: 12.12.2019
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 1/2020
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-019-00104-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Tailoring the Pressure Profile of TEA-CO2 Laser-Induced Shock Waves for Mechanical Forming and Separation Processes

Parametric Analysis during Laser Cutting of Basalt – Glass Hybrid Composite

Investigations on TaC Localized Dispersed X38CrMoV5-3 Surfaces with Regard to the Manufacturing of Wear Resistant Protruded Surface Textures

Parameters Affecting the Welding of Transparent Materials Using Femtosecond Laser Pulses

Effect of Welding Speed on the Prediction Accuracy of Residual Stress in Laser Welded 1.2 mm Thick Dual Phase Steel

Multi-Objective Optimization of Pulsed Nd: YAG Laser Cutting Process Using Entropy-Based ANN-PSO Model

Premium Partner

Marktübersichten