nach oben

Erschienen in:

01.02.2018 | Thematic Issue

Comparative modelling of the coupled thermal–hydraulic-mechanical (THM) processes in a heated bentonite pellet column with hydration

verfasst von: B. J. Graupner, H. Shao, X. R. Wang, T. S. Nguyen, Z. Li, J. Rutqvist, F. Chen, J. Birkholzer, W. Wang, O. Kolditz, P. Z. Pan, X. T. Feng, C. Lee, K. Maekawa, S. Stothoff, C. Manepally, B. Dasgupta, G. Ofoegbu, R. Fedors, J. D. Barnichon, E. Ballarini, S. Bauer, B. Garitte

Erschienen in: Environmental Earth Sciences | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

For the deep geological disposal of high-level radioactive waste in argillaceous rocks, the heat production of the waste is an important driver for thermal–hydraulic-mechanical (THM)-coupled processes. These THM processes influence the properties and conditions of the near field that in many repository designs contains bentonite as a clay buffer. One task in the DECOVALEX-2015 (DEvelopment of COupled models and their VALidation against Experiments) project was the modelling of a heated bentonite column (Villar et al. in Long-term THM tests reports: THM cells for the HE-E test: update of results until February 2014. Deliverable-no: D2.2-7.3. CIEMAT Technical Report IEMAT/DMA/2G210/03/2014, 2014) in preparation for the in situ heater experiment HE-E at the underground rock laboratory Mont Terri. DECOVALEX is an international cooperative project that focuses on the development and validation of mathematical models for simulating such coupled processes associated with disposal in deep geological repositories. Eight modelling teams developed their own THM-coupled models for the bentonite column experiment, using six different simulation codes. Each of the teams individually calibrated the THM parameters for the bentonite material. The eight resulting parameter sets agree well and allow a satisfactory reproduction of the TH measurements by all models. The modelling results for the evolution of temperature and relative humidity over time at three sensors in the bentonite column are in good agreement between the teams and with the measured data. Also, changes of the temperature due to modifications of the insulation and the adjustment of the heating power during the course of the experiment are well reproduced. The models were thus able to reproduce the main physical processes of the experiment, both for vapour-dominated diffusion during the heating phase and combined liquid and vapour transport during a subsequent heating and hydration phase. Based on the parameter sets, the teams predict a penetration of the water infiltration front in the 48-cm column filled with bentonite pellets to a depth between 25 and 35 cm over the 15,000 h (i.e. over 20 months) of the hydration phase of the experiment.

Vorheriger Artikel A preliminary assessment of the geochemical factors affecting groundwater and surface water quality around the rural communities in Al-Anbar, Western Desert of Iraq

Nächster Artikel Acid drainage neutralization and trace metals removal by a two-step system with carbonated rocks, Estado de Mexico, Mexico

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Armand G (2015) Task proposal for the international DECOVALEX-2019 project, Nov. 2015, Wakkanai, Japan

Ballarini E, Graupner B, Bauer S (2017) Thermal–hydraulic–mechanical behavior of bentonite and sand-bentonite materials as seal for a nuclear waste repository: numerical simulation of column experiments. Appl Clay Sci 135:289–299. https://doi.org/10.1016/j.clay.2016.10.007 CrossRef

Garitte B, Nguyen S, Barnichon JD, Graupner B, Lee L, Maekawa K, Ofoegbu G, Manepally C, Dasgupta B, Fedors R, Pan P, Feng XT, Rutqvist J, Chen F, Birkholzer J, Wang W, Kolditz O, Shao H (2016) Modelling the Mont-Terri HE-D experiment for the thermal–hydraulic–mechanical response of a bedded argillaceous formation to heating. Submitted to Environmental Earth Sciences

Garitte B, Shao H, Wang XR, Nguyen TS, Li Z, Rutqvist J, Birkholzer J, Wang WQ, Kolditz O, Pan PZ, Feng XT, Lee C, Graupner BJ, Maekawa K, Manepally C, Dasgupta B, Stothoff S, Ofoegbu G, Fedors R, Barnichon JD (2017) Evaluation of the predictive capability of coupled thermo-hydro-mechanical models for a heated bentonite/clay system (HE-E) in the Mont Terri Rock Laboratory. Environ Earth Sci 76:64. https://doi.org/10.1007/s12665-016-6367-x CrossRef

Gaus I, Wieczorek K, Schuster K, Garitte B, Senger R, Vasconcelos R, Mayor JC (2014a) EBS behaviour immediately after repository closure in a clay host rock: HE-E experiment (Mont Terri URL). Geol Soc Spec Publ. https://doi.org/10.1144/SP400.11

Gaus I, Garitte B, Senger R, Gens A, Vasconcelos R, Garcia-Sineriz JL, Trick T, Wieczorek K, Czaikowski O, Schuster K, Mayor JC, Velasco M, Kuhlmann U, Villar MV (2014b). The HE-E Experiment: lay-out, interpretation and THM modelling. Nagra Arbeitsbericht NAB pp 14–53

Hoffmann C, Alonso EE, Romero E (2007) Hydro-mechanical behaviour of bentonite pellet mixtures. Phys Chem Earth 32:832–849CrossRef

Itasca (2012) FLAC3D (fast Lagrangian analysis of continua in 3 dimensions), Version 5.0. Itasca Consulting Group, Minneapolis

Itasca Consulting Group (2011) FLAC V 7.0, fast Lagrangian analysis of continua, user’s guide. Itasca Consulting Group, Minneapolis

Klinkenberg LJ (1941) The permeability of porous media to liquids and gases. In: Drilling and production practice, American Petroleum Institute, pp 200–213

Kolditz O, Bauer S (2004) A process-oriented approach to computing multi-field problems in porous media. J Hydroinformatics 6:225–244

Kolditz O, Bauer S, Bilke L, Böttcher N, Delfs JO, Fischer T, Görke UJ, Kalbacher T, Kosakowski G, McDermott CI, Park CH, Radu F, Rink K, Shao H, Shao HB, Sun F, Sun YY, Singh AK, Taron J, Walther M, Wang W, Watanabe N, Wu Y, Xie M, Xu W, Zehner B (2012) OpenGeoSys: an open-source initiative for numerical simulation of thermo-hydro-mechanical/chemical (THM/C) processes in porous media. Environ Earth Sci 67(2):589–599. https://doi.org/10.1007/s12665-012-1546-x CrossRef

McWhorter DB, Sunada DK (1990) Exact integral solutions for two-phase flow. Water Resour Res 26(3):399–413CrossRef

Müller HR, Weber HP, Koehler S, Vogt T (2012) The full-scale emplacement (FE) experiment at the Mont Terri Rock Laboratory. Clays in natural and engineered barriers for radioactive waste confinement. In: 5th International meeting, book of abstracts (p. 923). France

Nguyen S, Li Z, Garitte B, Barnichon JD (2016) Modelling a heater experiment for radioactive waste disposal. ICE Environmental Geotechnics. In press

Ohnishi Y, Shibata H, Kobayashi A (1985) Development of finite element code for the analysis of coupled thermo-hydro-mechanical behaviors of a saturated–unsaturated medium. In: Proc. of int. symp. on coupled process affecting the performance of a nuclear waste repository, Berkeley, pp 263–268

Pan PZ, Feng XT (2013) Numerical study on coupled thermo-mechanical processes in Äspö Pillar stability experiment. J Rock Mech Geotech Eng 5(2):136–144CrossRef

Pan PZ, Feng XT, Hudson JA (2009a) Study of failure and scale effects in rocks under uniaxial compression using 3D cellular automata. Int J Rock Mech Min Sci 46(4):674–685CrossRef

Pan PZ, Feng XT, Huang XH, Cui Q, Zhou H (2009b) Coupled THM processes in EDZ of crystalline rocks using an elasto–plastic cellular automaton. Environ Geol 57(6):1299–1311CrossRef

Pearson FJ, Arcos D, Bath A, Boisson JY, Fernández AM, Gäbler HE, Gaucher E, Gautschi A, Griffault L, Hernán P, Waber HN (2003). Geochemistry of water in the Opalinus clay formation at the Mont Terri Laboratory, Mont Terri Project, TN 2003-03, SWISSTOPO

Rizzi M, Seiphoori A, Ferrari A, Ceresetti D, Laloui L (2012) Analysis of the behaviour of the granular MX-80 bentonite in THM-processes. Aktennotiz AN 12-102

Rutqvist J, Wu Y-S, Tsang C-F, Bodvarsson G (2002) A modeling approach for analysis of coupled multiphase fluid flow, heat transfer, and deformation in fractured porous rock. Int J Rock Mech Min Sci 39:429–442CrossRef

Rutqvist J, Zheng L, Chen F, Liu H-H, Birkholzer J (2014) Modeling of coupled thermo-hydro-mechanical processes with links to geochemistry associated with bentonite-backfilled repository tunnels in clay formations. Rock Mech Rock Eng 47:167–186CrossRef

Seiphoori A (2015) Thermo-hydro-mechanical characterisation and modelling of Wyoming granular bentonite. Nagra technical report 15-05

Stothoff S, Painter S (2016) xFlo version 1.1 user’s manual DECOVALEX-2015 version; NRC ADAMS accession no. ML16167A315. San Antonio, Texas: Center for Nuclear Waste Regulatory Analyses

Stothoff S, Manepally C, Ofoegbu G, Dasgupta B, Fedors R (2015) Modeling thermohydrological-mechanical behavior of granular bentonite in a laboratory column test. NRC ADAMS accession no. ML15324A128. San Antonio, Texas: Center for Nuclear Waste Regulatory Analyses

Tang AM, Cui YJ (2006) Determining the thermal conductivity of compacted MX80 clay, unsaturated soils 2006. Reston, Virginia

Tang AM, Cui YJ (2010) Effects of mineralogy on thermo-hydro-mechanical parameters of MX80 bentonite. J Rock Mech Geotech Eng 2(1):91–96

Villar MV (2005) MX-80 bentonite. Thermo-hydro-mechanical characterization performed at CIEMAT in the context of the prototype project. Informes Técnicos Ciemat 1053 Febrero, 2005. Departamento de Impacto Ambiental de la Energía

Villar MV (2013) PEBS project: long term THM tests reports: isothermal infiltration tests with materials from the HE-E (deliverable no: D2.2-7.2)

Villar MV, Martín PL, Gómez-Espina R, Romero FJ, Barcala JM (2012) THM cells for the HE-E test: setup and first results. PEBS report D2.2.7a. CIEMAT technical report CIEMAT/DMA/2G210/02/2012. Madrid, p 34

Villar MV, Martín PL, Romero FJ (2014) Long-term THM tests reports: THM cells for the HE-E test: update of results until February 2014. Deliverable-no: D2.2-7.3. CIEMAT technical report IEMAT/DMA/2G210/03/2014

Wang Q, Tang AM, Cui YJ, Delage P, Gatmiri B (2012) Experimental study on the swelling behaviour of bentonite/claystone mixture. Eng Geol 124(2012):59–66. https://doi.org/10.1016/j.engeo.2011.10.003 CrossRef

Wang X, Shao H, Wang W, Hesser J, Kolditz O (2015) Numerical modelling of heating and hydration experiments on bentonite pellets. Eng Geol 198:94–106CrossRef

Wieczorek K, Miehe R, Garitte B (2011). Measurement of thermal parameters of the HE-E buffer materials. Deliverable (D-No: 2.2-5) PEBS (contract number: FP7 249681)

Wieczorek K, Miehe R, Garitte B (2013) Thermal characterisation of HE-E buffer. Deliverable (D-No: 2.2-9) PEBS (contract number: FP7 249681)

Wileveau Y (2005) THM behaviour of host rock (HE-D experiment): progress report September 2003–October 2004. Mont Terri technical report TR2005-03

Wileveau Y, Su K (2007) In situ thermal experiment carried out in Opalinus clay and Callovo-Oxfordian claystones by Andra—experiment set-up and measurement results. ANDRA report, Paris, p 2007

Titel: Comparative modelling of the coupled thermal–hydraulic-mechanical (THM) processes in a heated bentonite pellet column with hydration
verfasst von: B. J. Graupner
H. Shao
X. R. Wang
T. S. Nguyen
Z. Li
J. Rutqvist
F. Chen
J. Birkholzer
W. Wang
O. Kolditz
P. Z. Pan
X. T. Feng
C. Lee
K. Maekawa
S. Stothoff
C. Manepally
B. Dasgupta
G. Ofoegbu
R. Fedors
J. D. Barnichon
E. Ballarini
S. Bauer
B. Garitte
Publikationsdatum: 01.02.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Environmental Earth Sciences / Ausgabe 3/2018
Print ISSN: 1866-6280
Elektronische ISSN: 1866-6299
DOI: https://doi.org/10.1007/s12665-018-7255-3

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2018

Leachability of radium-226 from industrial phosphogypsum waste using some simulated natural environmental solutions

A preliminary assessment of the geochemical factors affecting groundwater and surface water quality around the rural communities in Al-Anbar, Western Desert of Iraq

Assessing some shrub species for phytoremediation of soils contaminated with lead and zinc

Chemical and physical pedoindicators of soils with different textures: spatial variability

Estimating the water budget in a semi-arid region (Torrevieja aquifer—south-east Spain) by assessing groundwater numerical models and hydrochemical data

Hydrogeological assessment of the groundwater aquifers for sustainability state and development planning