Comparison Between Stress and Strain Quantities of the Failure–Deformation Process of Fennoscandian Hard Rocks Using Geological Information

The aim of this paper was to compare the stress and strain quantities that are related to the failure–deformation process of hard rock. The data used here was obtained from laboratory uniaxial compression tests performed on different types of Fennoscandian hard rocks. The failure–deformation process quantities were compared at each deformation stage and for each single specimen. Moreover, geological information such as the rock origin process and the rock characteristics of the specimens were studied and linked to the stress and strain quantities. The purpose was to investigate the influence of the rock origin process and rock characteristics on these quantities. The main results of this study showed that the normalized crack damage lateral strain (ε _3cd/ε _3p ) and the volumetric strain (ε _crv−ci and ε _v−cd) quantities were strongly affected by the grain size. The normalized and volumetric quantities are weakly dependent on the mineral composition.