nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

2. Composites and Biocomposites: Manufacturing and Processing

verfasst von : S. M. Sapuan, R. A. Ilyas, M. R. M. Asyraf

Erschienen in: Safety and Health in Composite Industry

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Currently, the application of composite materials has been ubiquitous in defence, automobile, aerospace, sports, household products and medical equipment. The composite materials were made up from two major phases called as fibre as reinforcement and polymeric matrix. The combination of both phases allows the material to be lightweight and high strength to be implemented in wide applications. Most of composite materials are commercially available in vast sources including synthetic (man-made) and natural-based materials. This chapter elaborates on the background and types of composites which are commercially available. Moreover, the processing and manufacturing of the composites are discussed comprehensively at the end of the manuscript.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Introduction to Safety and Health

Nächstes Kapitel Emission of Hazardous Air Pollution in the Composite Production

Alsubari S, Zuhri MYM, Sapuan SM et al (2021) Potential of natural fiber reinforced polymer composites in sandwich structures: a review on its mechanical properties. Polymers (basel) 13:423. https://doi.org/10.3390/polym13030423CrossRef

Alves C, Ferrão PMC, Silva AJ et al (2010) Ecodesign of automotive components making use of natural jute fiber composites. J Clean Prod 18:313–327. https://doi.org/10.1016/j.jclepro.2009.10.022CrossRef

Asyraf MRM, Ishak MR, Sapuan SM et al (2020) Potential application of green composites for cross arm component in transmission tower: a brief review. Int J Polym Sci. https://doi.org/10.1155/2020/8878300CrossRef

Asyraf MRM, Rafidah M, Azrina A, Razman MR (2021) Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: a comprehensive review on chemical treatments. Cellulose. https://doi.org/10.1007/s10570-021-03710-3CrossRef

Asyraf MRM, Rafidah M, Ishak MR et al (2020) Integration of TRIZ, Morphological Chart and ANP method for development of FRP composite portable fire extinguisher. Polym Compos 41:2917–2932. https://doi.org/10.1002/pc.25587CrossRef

Athanasiou KA, Niederauer GG, Agrawal CM (1996) Sterilization, toxicity, biocompatibility and clinical applications of polylactic acid/polyglycolic acid copolymers. Biomaterials 17:93–102. https://doi.org/10.1016/0142-9612(96)85754-1CrossRef

Azeredo HMC, Mattoso LHC, Wood D et al (2009) Nanocomposite edible films from mango puree reinforced with cellulose nanofibers. J Food Sci 74. https://doi.org/10.1111/j.1750-3841.2009.01186.x

Bajuri F, Mazlan N, Ishak MR (2017) Effect of silica nanoparticles in kenaf reinforced epoxy: Flexural and compressive properties. Pertanika J Sci Technol 25:1029–1038

Bajuri F, Mazlan N, Ishak MR, Imatomi J (2016) Flexural and compressive properties of hybrid kenaf/silica nanoparticles in epoxy composite. Procedia Chem 19:955–960. https://doi.org/10.1016/j.proche.2016.03.141CrossRef

Bashir ASM, Manusamy Y (2015) Recent Developments in Biocomposites Reinforced with Natural Biofillers from Food Waste. Polym—Plast Technol Eng 54:87–99. https://doi.org/10.1080/03602559.2014.935419CrossRef

Bleuze L, Chabbert B, Lashermes G, Recous S (2020) Hemp harvest time impacts on the dynamics of microbial colonization and hemp stems degradation during dew retting. Ind Crops Prod 145. https://doi.org/10.1016/j.indcrop.2020.112122

Boyko G, Tikhosova H, Ternova T (2020) Optimization of the decortication process of industrial hemp stems by mathematical planning method. INMATEH—Agric Eng 60:53–60. https://doi.org/10.35633/INMATEH-60-06

Chevali VS, Dean DR, Janowski GM (2009) Flexural creep behavior of discontinuous thermoplastic composites: Non-linear viscoelastic modeling and time-temperature-stress superposition. Compos Part A Appl Sci Manuf 40:870–877. https://doi.org/10.1016/j.compositesa.2009.04.012CrossRef

Curvelo AAS, De Carvalho AJF, Agnelli JAM (2001) Thermoplastic starch-cellulosic fibers composites: preliminary results. Carbohydr Polym 45:183–188. https://doi.org/10.1016/S0144-8617(00)00314-3CrossRef

Fairuz AM, Sapuan SM, Zainudin ES, Jaafar CNA (2014) Polymer composite manufacturing using a pultrusion process: A review. Am J Appl Sci 11:1798–1810. https://doi.org/10.3844/ajassp.2014.1798.1810CrossRef

Fei M, Liu T, Fu T et al (2019) Styrene-free soybean oil thermoset composites reinforced by hybrid fibers from recycled and natural resources. ACS Sustain Chem Eng 7:17808–17816. https://doi.org/10.1021/acssuschemeng.9b04308CrossRef

Fiore V, Valenza A, Di Bella G (2012) Mechanical behavior of carbon/flax hybrid composites for structural applications. J Compos Mater 46:2089–2096. https://doi.org/10.1177/0021998311429884CrossRef

Hamidon MH, Sultan MTH, Ariffin AH, Shah AUM (2019) Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review. J Mater Res Technol 8:3327–3337. https://doi.org/10.1016/j.jmrt.2019.04.012CrossRef

Hums ME, Moreau RA, Yadav MP et al (2018) Comparison of bench-scale decortication devices to fractionate bran from sorghum. Cereal Chem 95:720–733. https://doi.org/10.1002/cche.10087CrossRef

Ilyas RA, Sapuan SM (2020) Biopolymers and biocomposites: chemistry and technology. Curr Anal Chem 16:500–503. https://doi.org/10.2174/157341101605200603095311CrossRef

Ilyas RA, Sapuan SM, Asyraf MRM et al (2020a) Introduction to biofiller reinforced degradable polymer composites. In: Sapuan SM, Jumaidin R, Hanafi I (eds) Biofiller reinforced biodegradable polymer composites. CRC Press, Boca Raton, USA, pp 1–23

Ilyas RA, Sapuan SM, Asyraf MRM et al (2020b) Mechanical and dynamic mechanical properties of macro-nanosized natural fibre reinforced polymer composite. In: Kumar SMK (ed) Mechanical and dynamic mechanical analysis of biocomposite. Wiley, West Sussex, UK

Ilyas RA, Sapuan SM, Atiqah A et al (2020c) Sugar palm (Arenga pinnata [Wurmb.] Merr) starch films containing sugar palm nanofibrillated cellulose as reinforcement: water barrier properties. Polym Compos 41:459–467. https://doi.org/10.1002/pc.25379CrossRef

Ilyas RA, Sapuan SM, Ishak MR et al (2018a) Characterization of sugar palm nanocellulose and its potential for reinforcement with a starch-based composite. In: Sugar palm biofibers, biopolymers, and biocomposites. CRC Press, First edition. CRC Press/Taylor & Francis Group, Boca Raton, FL, pp 189–220

Ilyas RA, Sapuan SM, Norrrahim MNF et al (2020d) Nanocellulose/starch biopolymer nanocomposites: Processing, manufacturing, and applications. In: Al-Oqla FM, Sapuan SM (eds) Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, 1st edn. Elsevier Inc., Amsterdam, Netherland, pp 65–88CrossRef

Ilyas RA, Sapuan SM, Sanyang ML et al (2018b) Nanocrystalline cellulose as reinforcement for polymeric matrix nanocomposites and its potential applications: a review. Curr Anal Chem 14:203–225. https://doi.org/10.2174/1573411013666171003155624CrossRef

Ishak NM, Sivakumar D, Mansor MR (2018) The application of TRIZ on natural fibre metal laminate to reduce the weight of the car front hood. J Brazilian Soc Mech Sci Eng 40:1–12. https://doi.org/10.1007/s40430-018-1039-2CrossRef

Jawaid M, Abdul Khalil HPS (2011) Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review. Carbohydr Polym 86:1–18. https://doi.org/10.1016/j.carbpol.2011.04.043CrossRef

Johari AN, Ishak MR, Leman Z et al (2019) Fabrication and cut-in speed enhancement of savonius vertical axis wind turbine (SVAWT) with hinged blade using fiberglass composites. In: Seminar Enau Kebangsaan. Bahau, Negeri Sembilan, Malaysia, pp 978–983

John MJ, Thomas S (2008) Biofibres and biocomposites. Carbohydr Polym 71:343–364. https://doi.org/10.1016/j.carbpol.2007.05.040CrossRef

Jose S, Mishra L, Basu G, Samanta AK (2016) Study on reuse of coconut fiber chemical retting bath. Part 1: Retting efficiency. J Nat Fibers 13:603–609. https://doi.org/10.1080/15440478.2015.1093441CrossRef

Jumaidin R, Khiruddin MAA, Asyul Sutan Saidi Z et al (2019) Effect of cogon grass fibre on the thermal, mechanical and biodegradation properties of thermoplastic cassava starch biocomposite. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2019.11.011CrossRef

Kasiviswanathan S, Santhanam K, Kumaravel A (2015) Evaluation of mechanical properties of natural hybrid fibers, reinforced polyester composite materials. Carbon—Sci Technol 7:43–49

Ketabchi MR, Hoque ME, Khalid Siddiqui M (2015) Critical concerns on manufacturing processes of natural fibre reinforced polymer composites. In: Sapuan SM, Jawaid M, Yusoff N, Hoque ME (eds) Manufacturing of natural fibre reinforced polymer composites, 1st edn. Springer International Publishing, Cham, Switzerland, pp 125–138CrossRef

Khan T, Hameed Sultan MT, Bin AAH (2018) The challenges of natural fiber in manufacturing, material selection, and technology application: a review. J Reinf Plast Compos 37:770–779. https://doi.org/10.1177/0731684418756762CrossRef

Li F, Marks DW, Larock RC, Otaigbe JU (2000) Fish oil thermosetting polymers: synthesis, structure, properties and their relationships. Polymer (guildf) 41:7925–7939. https://doi.org/10.1016/S0032-3861(00)00030-6CrossRef

Liu T, Yao K, Gao F (2009) Identification and autotuning of temperature-control system with application to injection molding. IEEE Trans Control Syst Technol 17:1282–1294. https://doi.org/10.1109/TCST.2008.2006746CrossRef

Magnusson K, Svennerstedt B (2007) Influence of temperature on the water retting process of hemp (Cannabis sativa L.) cultivated under Swedish climate conditions. J Ind Hemp 12:3–17. https://doi.org/10.1300/J237v12n02_02CrossRef

Mallick PK (2010) Thermoset–matrix composites for lightweight automotive structures. In: Mallick PK (ed) Materials, design and manufacturing for lightweight vehicles, 1st edn. Woodhead Publishing Series, Boca Raton, USA, pp 208–231CrossRef

Mansor MR, Sapuan SM, Hambali A (2015) Conceptual Design of Kenaf Polymer Composites Automotive Spoiler Using TRIZ and Morphology Chart Methods. 761:63–67. https://doi.org/10.4028/www.scientific.net/AMM.761.63CrossRef

Mansor MR, Sapuan SM, Zainudin ES, Nuraini AA (2014) Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ-Morphological Chart-Analytic Hierarchy Process method. Mater Des 54:473–482. https://doi.org/10.1016/j.matdes.2013.08.064CrossRef

Marques AT (2011) Fibrous materials reinforced composites production techniques. Fibrous Compos Mater Civ Eng Appl, 191–215. https://doi.org/10.1533/9780857095583.3.191

Mohanty AK, Drzal LT, Misra M (2002a) Engineered natural fiber reinforced polypropylene composites: influence of surface modifications and novel powder impregnation processing. J Adhes Sci Technol 16:999–1015. https://doi.org/10.1163/156856102760146129CrossRef

Mohanty AK, Misra M, Drzal LT (2002b) Sustainable Bio-Composites from renewable resources: opportunities and challenges in the green materials world. J Polym Environ 10:19–26. https://doi.org/10.1023/A:1021013921916CrossRef

Mohanty AK, Misra M, Hinrichsen G (2000) Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 276–277:1–24. https://doi.org/10.1002/(SICI)1439-2054(20000301)276:1%3c1::AID-MAME1%3e3.0.CO;2-WCrossRef

Morrison WH, Archibald DD, Sharma HSS, Akin DE (2000) Chemical and physical characterization of water- and dew-retted flax fibers. Ind Crops Prod 12:39–46. https://doi.org/10.1016/S0926-6690(99)00044-8CrossRef

Nadhirah A, Mohamad D, Zainoodin M et al (2017) Properties of fiberglass crossarm in transmission tower—a review. Prop Fiberglass Crossarm Transm Tower Rev 12:15228–15233

Nurazzi NM, Khalina A, Sapuan SM et al (2019) Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites. J Mater Res Technol. https://doi.org/10.1016/j.jmrt.2019.11.086CrossRef

Olaniran AF, Okonkwo CE, Erinle OC et al (2020) Optimum boiling duration and its effect on nutritional quality and acceptability of mechanically dehulled unfermented locust bean seeds. Prev Nutr Food Sci 25:219–224. https://doi.org/10.3746/pnf.2020.25.2.219CrossRef

Omran AAB, Mohammed AABA, Sapuan SM et al (2021) Micro- and nanocellulose in polymer composite materials: a review. Polymers (basel) 13:231. https://doi.org/10.3390/polym13020231CrossRef

Pickering KL, Beckermann GW, Alam SN, Foreman NJ (2007) Optimising industrial hemp fibre for composites. Compos Part A Appl Sci Manuf 38:461–468. https://doi.org/10.1016/j.compositesa.2006.02.020CrossRef

Potluri R (2019) Natural fiber-based hybrid bio-composites: processing, characterization, and applications. In: Muthu SS (ed) Green composites: processing, characterisation and applications for textiles, 1st edn. Springer Nature Singapore Pte Ltd., Singapore, pp 1–46

Rosli MU, Ariffin MKA, Sapuan SM, Sulaiman S (2013) Integrated AHP-TRIZ innovation method for automotive door panel design. Int J Eng Technol 5:3158–3167

Saba N, Paridah MT, Jawaid M et al (2015) Manufacturing and processing of kenaf Fibre-reinforced epoxy composites via different methods. In: Sapuan SM, Jawaid M, Yusof N, Hoque ME (eds) Manufacturing of natural fibre reinforced polymer composites. Springer, New York, USA, pp 101–124CrossRef

Sanyang ML, Sapuan SM, Jawaid M et al (2016) Recent developments in sugar palm (Arenga pinnata) based biocomposites and their potential industrial applications: a review. Renew Sustain Energy Rev 54:533–549. https://doi.org/10.1016/j.rser.2015.10.037CrossRef

Shahroze RM, Chandrasekar M, Senthilkumar K et al (2019) A review on the various fibre treatment techniques used for the fibre surface modification of the sugar palm fibres. In: Seminar Enau Kebangsaan. Bahau, Negeri Sembilan, Malaysia, pp 48–52

Shalini R, Singh A (2009) Biobased packaging materials for the food industry. J Food Sci Technol 5:16–20

Sharma SD, Sowntharya L, Kar KK (2016) Polymer-based composite structures: processing and applications. In: Kar KK (ed) Composite materials: processing, applications, characterizations, 1st edn. Springer-Verlag Berlin Heidelberg, Berlin, Heidelberg, pp 1–36

Singh S, Kumar V (2017) Review of current technology in glass fibre composite. Int J Mech Prod Eng Res Dev 7:109–118. https://doi.org/10.24247/ijmperdaug201712

Sisti L, Totaro G, Vannini M, Celli A (2018) Retting process as a pretreatment of natural fibers for the development of polymer composites. In: Kalia S (ed) Lignocellulosic composite materials, 1st edn. Springer International Publishing AG, Cham, Switzerland, pp 97–135

Song Y, Han G, Jiang W (2017) Comparison of the performance of kenaf fiber using different reagents presoak combined with steam explosion treatment. J Text Inst 108:1762–1767. https://doi.org/10.1080/00405000.2017.1285200CrossRef

Stochioiu C, Chettah A, Piezel B et al (2018) Study of the time varying properties of flax fiber reinforced composites. AIP Conf Proc 1932:https://doi.org/10.1063/1.5024191

Thomsen AB, Rasmussen S, Bohn V et al (2005) Hemp raw materials: the effect of cultivar, growth conditions and pretreatment on the chemical composition of the fibres. Risø-R Rep 1507:6–30

Tian Y, Liu X, Zheng X et al (2017) Effects of ultrasonic wave on flax retting and fiber properties. Wool Text J 45:40–42. https://doi.org/10.19333/j.mfkj.2016070080503

Tian Y, Liu X, Zheng X, Wang L (2016) Antimicrobial properties of flax fibers in the enzyme retting process. Fibres Text East Eur 24:15–17. https://doi.org/10.5604/12303666.1172082CrossRef

Vijay N, Rajkumara V, Bhattacharjee P (2016) Assessment of composite waste disposal in aerospace industries. Procedia Environ Sci 35:563–570. https://doi.org/10.1016/j.proenv.2016.07.041CrossRef

Yang Y, Boom R, Irion B et al (2012) Chemical Engineering and Processing : Process Intensification Recycling of composite materials. Chem Eng Process Process Intensif 51:53–68. https://doi.org/10.1016/j.cep.2011.09.007CrossRef

Yu L, Dean K, Li L (2006) Polymer blends and composites from renewable resources. Prog Polym Sci 31:576–602. https://doi.org/10.1016/j.progpolymsci.2006.03.002CrossRef

Zhong Y, Godwin P, Jin Y, Xiao H (2020) Biodegradable polymers and green-based antimicrobial packaging materials: a mini-review. Adv Ind Eng Polym Res 3:27–35. https://doi.org/10.1016/j.aiepr.2019.11.002CrossRef

Titel: Composites and Biocomposites: Manufacturing and Processing
verfasst von: S. M. Sapuan
R. A. Ilyas
M. R. M. Asyraf
Verlag: Springer Singapore
Buch: Safety and Health in Composite Industry
Print ISBN: 978-981-16-6135-8

Electronic ISBN: 978-981-16-6136-5

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-981-16-6136-5_2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten