nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

8. Conducting Polymers

verfasst von : Keiichi Kaneto

Erschienen in: Soft Actuators

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Soft actuators based on conducting polymers are discussed in terms of strain, stress and stability taking the mechanism into consideration. The actuation is generated by the insertion of anions from the electrolyte solution, which is triggered by electrochemical redox reactions. Characteristics of the actuation in polypyrrole, polyaniline, polythiophene, and poly(3,4-ethylenedioxythiophene) (PEDOT) are described. The maximum strain and stress are reported to be 39.9 % and 22 MPa, respectively, in polypyrrole actuator. However, the strain is usually less than 10 %. The stress (contraction force) originates from the elasticity of conducting polymers or Young’s modulus. Creeping under tensile loads, which is intimate issue in soft actuators, is discussed in terms of conformation change of polymer chains and shape memory effect. The actuation generated by sorption and desorption of moisture controlled with electrical heating is also introduced with the mechanism and characteristics.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Ionic Conductive Polymers

Nächstes Kapitel Humidity-Sensitive Conducting Polymer Actuators

Mirfakhrai T, Madden JDW, Baughman RH (2007) Polymer artificial muscles. Mater Today 10:30–38. doi:https://doi.org/10.1016/S1369-7021(07)70048-2CrossRef

Asaka K, Oguro K, Nishimura Y, Mizutani M, Takenaka H (1995) Bending of polyelectrolyte membrane-platinum composites by electric stimuli. 1. Response characteristics to various wave-forms. Polym J 27:436–440. https://doi.org/10.1295/polymj.27.436CrossRef

Hara S, Zama T, Takashima W, Kaneto K (2005) Free-standing gel-like polypyrrole actuators doped with bis(perfluoroalkylsulfonyl)imide exhibiting extremely large strain. Smart Mater Struct 14:1501–1510. https://doi.org/10.1088/0964-1726/14/6/042CrossRef

Pelrine R, Kornbluh R, Pei Q, Joseph J (2000) High-speed electrically actuated elastomers with strain greater than 100 %. Science 287:836–839. https://doi.org/10.1126/science.287.5454.836CrossRefPubMed

Hirai T, Sadatoh H, Ueda T, Kasazaki T, Kurita Y, Hirai M, Hayashi S (1996) Polyurethane elastomer actuator. Angew Makrom Chemie 240:211–229. https://doi.org/10.1002/apmc.1996.052400121CrossRef

Osada Y, Okuzaki H, Hori H (1992) A polymer gel with electrically driven motility. Nature 355:242–244. https://doi.org/10.1038/355242a0CrossRef

Fukushima T, Asaka K, Kosaka A, Aida T (2005) Fully plastic actuator through layer-by-layer casting with ionic-liquid bucky gel. Angew Chem Int Ed 44:2410–2413. https://doi.org/10.1002/anie.200462318CrossRef

Baughman RH (1996) Conducting polymer artificial muscles. Synth Met 78:339–353. https://doi.org/10.1016/0379-6779(96)80158-5CrossRef

Kaneto K, Min Y-G, MacDiarmid AG (1994) Conductive polyaniline laminates. U.S-Patent 5,556,700

10.

Otero TF, Sansinena JM (1995) Artificial muscles based on conducting polymers. Bioelectrochem Bioenerg 38:411–414. https://doi.org/10.1016/0302-4598(95)01802-LCrossRef

11.

Hara S, Zama T, Takashima W, Kaneto K (2005) Free-standing polypyrrole actuators with response rate of 10.8 % s(−1). Synth Met 149(2–3):199–201. https://doi.org/10.1016/j.synthmet.2005.01.003CrossRef

12.

Bredas JL, Wudl F, Heeger AJ (1987) Polarons and bipolarons in doped polythiophene: a theoretical investigation. Solid State Commun 63:577–580. https://doi.org/10.1016/0038-1098(87)90856-8CrossRef

13.

Sendai T, Suematsu H, Kaneto K (2009) Anisotropic strain and memory effect in electrochemomechanical strain of polypyrrole films under high tensile stresses. Jpn J Appl Phys 48:051506. https://doi.org/10.1143/JJAP.48.051506 (4 pages)CrossRef

14.

Kaneto K, Hashimoto H, Tominaga K, Takashima W (2011) Shape retention in polyaniline artificial muscles. Jpn J Appl Phys 50:021603. https://doi.org/10.1143/JJAP.50.021603 (5 pages)CrossRef

15.

Okuzaki H, Kunugi T (1996) Adsorption-induced bending of polypyrrole films and its application to a chemomechanical rotor. J Polym Sci B Polym Phys 34:1735–1749. doi:10.1002/(SICI)1099-0488(19960730)34:10<1747::AID-POLB5>3.0.CO;2-NCrossRef

16.

Okuzaki H, Kunugi T (1998) Electrically induced contraction of polypyrrole film in ambient air. J Polym Sci B Polym Phys 36:1591–1594. doi:10.1002/(SICI)1099-0488(19980715)36:9<1591::AID-POLB16>3.3.CO;2-WCrossRef

17.

Okuzaki H, Suzuki H, Ito T (2009) Electrically driven PEDOT/PSS actuators. Synth Metal 159:2233–2236. https://doi.org/10.1016/j.synthmet.2009.07.054CrossRef

18.

Tominaga K, Hashimoto H, Takashima W, Kaneto K (2011) Training and shape retention in conducting polymer artificial muscles. Smart Mater Struct 20:124005. https://doi.org/10.1088/0964-1726/20/12/124005 (6 pages)CrossRef

19.

Spinks GM, Truong VT (2005) Work-per-cycle analysis for electromechanical actuators. Sens Actuators A 119:455–461. https://doi.org/10.1016/j.sna.2004.10.010CrossRef

20.

Kaneto K, Fujisue H, Kunifusa M, Takashima W (2007) Conducting polymer soft actuators based on polypyrrole films-energy conversion efficiency. Smart Mater Struct 16:S250–S255. https://doi.org/10.1088/0964-1726/16/2/S08CrossRef

21.

Hara S, Zama T, Takashima W, Kaneto K (2004) TFSI-doped polypyrrole actuator with 26 % strain. J Mater Chem 14:1516–1517. https://doi.org/10.1039/b404232hCrossRef

22.

Hara S, Zama T, Takashima W, Kaneto K (2004) Artificial muscles based on polypyrrole actuators with large strain and stress induced electrically. Polym J 36:151–161. https://doi.org/10.1295/polymj.36.151CrossRef

23.

Fujisue H, Sendai T, Yamato K, Takashima W, Kaneto K (2007) Work behaviors of soft actuators based on cation driven polypyrrole. Bioinsp Biomim 2:S1–S5. https://doi.org/10.1088/1748-3182/2/2/S01CrossRefPubMed

24.

Madden JD, Ringerknecht D, Anquetil PA, Hunter IW (2007) Creep and cycle life in polypyrrole actuators. Sens Actuators A 133:210–217. https://doi.org/10.1016/j.sna.2006.03.016CrossRef

25.

Smela E, Gadegaard N (2001) Volume change in polypyrrole studied by atomic force microscopy. J Phys Chem B 105:9395–9406. https://doi.org/10.1021/jp004126uCrossRef

26.

Foroughi J, Spinks GM, Wallace GG (2011) High strain electromechanical actuators based on electrodeposited polypyrrole doped with di-(2ethylhexyl)sulfosuccinate. Sens Actuators B 155:278–284. https://doi.org/10.1016/j.snb.2010.12.035CrossRef

27.

Yamato K, Tominaga K, Takashima W, Kaneto K (2009) Stability of electrochemomechanical strains in polypyrrole films using ionic liquids. Synth Met 159:839–842. https://doi.org/10.1016/j.synthmet.2009.01.016CrossRef

28.

Ding J, Zhou D, Spinks G, Wallace GG, Forsyth S, Forsyth M, MacFarlane D (2003) Use of ioni liquid as electrolytes in electromechanical actuator systems based on inherently conducting polymrs. Chem Mater 15:2392–2398. https://doi.org/10.1021/cm020918kCrossRef

29.

Takashima W, Nakashima M, Pandey SS, Kaneto K (2004) Enhanced electrochemomechanical activity of polyaniline films towards high pH region: contribution of Donnan effect. Electrochim Acta 49:4239–4244. https://doi.org/10.1016/jelectacta.2004.04.020CrossRef

30.

Smela E, Lu W, Mattes BR (2005) Polyaniline actuators:Part1 PANi(AMPS) in HCl. Synth Metal 151:26–42. https://doi.org/10.1016/j.synthmet.2005.03.009CrossRef

31.

Lu W, Mattes BR (2005) Factors influencing electrochemical actuation of polyaniline fibrs in ionic liquids. Synth Met 152:53–56. https://doi.org/10.1016/j.synthmet.2005.07.122CrossRef

32.

Fuchiwaki M, Takashima W, Kaneto K (2002) Soft actuators based on poly(3-alkylthiophene) films upon electrochemical oxidation and reduction. Mol Cryst Liq Cryst 374:513–520. https://doi.org/10.1080/10587250210420CrossRef

33.

Xi BB, Troung VT, Whitten P, Ding J, Spinks GM, Wallace GG (2006) Poly(3-methylthiophene) electrochemical actuators showing increased sprain and work per cycle at higher operating stresses. Polymer 47:7720–7725. https://doi.org/10.1016/j.polymer.2006.08.063CrossRef

34.

Vandesteeg N, Madden PG, Madden JD, Anquetil PA, Hunter IW (2003) Synthesis and characterization of EDOT-based conducting polymer actuators. Smart Struct Mater EAPAD 5051:349–356. https://doi.org/10.1117/12.484418

35.

Kiefer R, Bowmaker GA, Cooney RP, Kilmartin PA, Sejdic JT (2008) Cation driven actuation for free standing PEDOT film prepared from propylene carbonate electrolytes containing TBACF₃SO₃. Electrochim Acta 53:2593–2599. https://doi.org/10.1016/j.electacta.2007.10.033CrossRef

36.

Kaneto K, Takayanagi K, Tominaga K, Takashima W (2012) How to improve electrochemomechanical strain in conucting polymers. In: Proceedings of SPIE electroactive polymer actuators and devices (EAPAD), vol 8340, pp 83400K-1 ~ 7. https://doi.org/10.1117/12.917879

37.

Plesse C, Khaldhi A, Wang Q, Cattan E, Eyssie D, Chevrot C, Vidal F (2011) Polyethylene oxide-poltetrahydrofurane-PEDOT conducting interpenetrating polymer networks for high speed actuators. Smart Mater Struct 20:124002. https://doi.org/10.1088/0964-1726/20/12/124002 (8 pages)CrossRef

38.

Cho MS, Seo HJ, Nam JD, Choi HR, Koo JC, Song KG, Lee Y (2006) A solid state actuator based on the PEDOT/NBR system. Sens Actuators B 119:621–624. https://doi.org/10.1016/j.snb.2006.01.021CrossRef

39.

Hara S, Zama T, Takashima W, Kaneto K (2005) Gel-like polypyrrole based artificial muscles with extremely large strain. Polym J 36:933–936. https://doi.org/10.1295/polymj.36.933CrossRef

40.

Kaneto K, Kaneko M, Min Y, MacDiarmid AG (1995) Artificial muscle: electromechanical actuators using polyaniline films. Synth Metal 71:2211–2212. https://doi.org/10.1016/0379-6779(94)03226-VCrossRef

41.

Fuchiwaki M, Takashima W, Kaneto K (2001) Comparative study of electrochemomechanical deformation of poly(3-alkylthiophene)s, polyaniline and polypyrrole films. Jpn J Appl Phys 40:7110–7116. https://doi.org/10.1143/JJAP.40.7110CrossRef

42.

Kaneto K, Shinonome T, Tominaga K, Takashima W (2011) Electrochemical creeping and actuation of polypyrrole in ionic liquid. Jpn J Appl Phys 50:091601. https://doi.org/10.1143/JJAP.50.091601 (5 pages)CrossRef

Titel: Conducting Polymers
verfasst von: Keiichi Kaneto
Verlag: Springer Singapore
Buch: Soft Actuators
Print ISBN: 978-981-13-6849-3

Electronic ISBN: 978-981-13-6850-9

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-13-6850-9_8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht